Multiband Compression 2
Open the tutorial.
Mastering
Mastering for different qualities of playback gear is a special art. The major difference between systems is the bass response of the speakers. We would all like true response down to the limit of hearing, but physics and economics work against that. Most budget speaker systems bottom out at 100 Hz or so, the bass driver’s resonant frequency. If a speaker is resonant at 100 Hz, a 50 Hz signal will excite that resonance, and so will a 55 Hz signal. The result is that anything lower that the speaker is equipped to handle will just add mud to the low end. Mastering engineers know this and roll off the signal below 75 Hz or so. So, what’s left to offer someone who spends the money to get speaker with a good bass response? Instead of just throwing out the deep bass, we want to control it so that there’s something for good speakers to reproduce without getting the less expensive speakers overly excited. A multiband compressor is just the thing, because we can keep the bass full without crossing the line. (To do this properly you have to listen to the mix on appropriate speakers, which is why you often see low-end Radio Shack and Yamaha boxes in million dollar recording rooms.)
We also usually roll off the high end just a bit, as compressed highs keep the attacks crisp. However, if the level is too high the effect is overly bright.
The omx.5band~ object compressor is detailed enough to provide this kind of fine control. (See the patcher C6mMultibandComp5band.)
In addition to the features of the 4 band, the 5 band compressor features:
The presets in the for the omx.5band~ object illustrate various kinds of processing curves. The “Universal” setting is just a general boost to the sound, with a 3-to-1 compression and no limiting. Bass enhancement is switched in for a bit of warmth. The “Pop” setting, on the other hand, sets a 50:1 compression with hard driven limiting in the lowest two bands. The gives a solid bottom to the sound. The “Hit Radio” settings are a compromise between the two. You will note that the times are all about the same, with appropriately slower attack and release in the low bands. “FM Radio” differs primarily in the high end, which is compressed a bit tighter than the pop and hit settings.
Since the omx.5band~ object uses seven times as much CPU as the four-band version, it may not be appropriate for everyday use—but it will be perfect for a few tough tasks.

See Also

Name Description
omx.4band~ OctiMax 4-band Compressor
omx.5band~ OctiMax 5-band Compressor