Forums > MaxMSP

"5-point-1-panning" example patch – automation missing

October 6, 2008 | 1:27 pm

Hello folks! I’m still working on this 5.1 project, and I found that part
of the example patch
(examples/spatialization/5-point-1-fun/5-point-1-panning.pat), has the
ability to record and playback the automation of the pictslider, but doesn’t
work. Upon examining the bpatcher, I don’t find the send "s
#1-5.1automation-record" to have a matching receive anywhere.

I am totally rusty at making and fixing patches, as I haven’t used
Max/MSP/Jitter in over a year now. Could someone suggest a way to fix it so
the recording works? I’m assuming that the coordinates get saved to a
table, which should get saved when recording stops, and then sent to the
recieve "r #1-5.1automation-play" for playback. The umenu doesn’t have a
"stop" option for the recording either.

Any help, or just suggestions would be appreciated.

(I am totally embarassed at not being able to figure this out right away.)

here is the patch:

max v2;
#N vpatcher 194 91 879 751;
#P origin 9 -62;
#P window setfont "Sans Serif" 9.;
#P window linecount 1;
#P comment 15 64 94 196617 panning automation;
#P toggle 283 469 15 0;
#P newex 283 488 37 196617 gate;
#P toggle 292 70 15 0;
#P newex 292 89 37 196617 gate;
#P user umenu 111 63 58 196647 1 64 79 1;
#X add off;
#X add play;
#X add record;
#N vpatcher 10 59 325 298;
#P window setfont "Sans Serif" 9.;
#P window linecount 1;
#P newex 201 138 50 196617 == 2;
#P newex 107 138 50 196617 == 1;
#P newex 21 98 50 196617 i;
#P newex 21 138 61 196617 prepend set;
#N comlet to automation mode menu;
#P outlet 21 168 15 0;
#P window linecount 2;
#P comment 23 186 69 196617 to automation mode menu;
#N comlet automation record gate;
#P outlet 201 168 15 0;
#N comlet automation playback gate;
#P outlet 107 168 15 0;
#P window linecount 1;
#P newex 38 68 192 196617 r $1-5.1auto-mode;
#N comlet from automation mode menu;
#P inlet 21 30 15 0;
#P window linecount 2;
#P comment 108 186 75 196617 automation playback gate;
#P comment 204 186 69 196617 automation record gate;
#P window linecount 3;
#P comment 40 27 69 196617 from automation mode menu;
#P connect 3 0 10 0;
#P connect 4 0 10 0;
#P connect 10 0 9 0;
#P connect 9 0 8 0;
#P connect 10 0 11 0;
#P connect 11 0 5 0;
#P connect 10 0 12 0;
#P connect 12 0 6 0;
#P pop 1;
#P newobj 111 25 372 196617 p automation-mode;
#P newex 310 417 70 196617 t b l;
#P newex 319 68 68 196617 route $0-;
#P message 310 442 50 196617 $0-;
#P newex 310 466 70 196617 zl join;
#P newex 319 46 181 196617 r $1-5.1automation-play;
#P newex 283 510 187 196617 s $1-5.1automation-record;
#P window linecount 4;
#P comment 294 254 162 196617 "#1" = $1 is used to connect the 5.1 panners
with the master module otherwise known as "5.1record-monitor".;
#P window linecount 3;
#P comment 294 212 162 196617 "#0" = is used to by the automation system to
indentify this 5.1 panner module.;
#P window linecount 2;
#P hidden comment 376 139 40 196617 Stereo Spread;
#P window linecount 1;
#P hidden comment 425 137 31 196617 Time;
#P hidden comment 327 135 23 196617 LFE;
#P hidden comment 278 136 14 196617 Y;
#P newex 222 115 205 196617 unpack 1 2 3 4 5;
#P hidden comment 233 135 14 196617 X;
#P comment 99 272 24 196617 ms;
#P hidden newex 215 214 45 196617 loadbang;
#P hidden message 215 236 26 196617 100;
#N comlet nothing;
#P outlet 14 515 15 0;
#N comlet pan list in;
#P inlet 222 95 15 0;
#P window linecount 3;
#P comment 219 53 24 196617 pan list in;
#N comlet pan list out;
#P outlet 239 515 15 0;
#N comlet mono in;
#P inlet 14 346 15 0;
#P window linecount 1;
#P newex 128 492 108 196617 send~ $1-LFE;
#P newex 106 472 108 196617 send~ $1-Center;
#P newex 82 453 108 196617 send~ $1-RightS;
#P newex 60 433 108 196617 send~ $1-LeftS;
#P newex 36 413 108 196617 send~ $1-Right;
#P newex 14 393 108 196617 send~ $1-Left;
#P window linecount 2;
#P hidden comment 169 86 38 196617 Stereo Spread;
#P window linecount 1;
#P comment 57 85 35 196617 center;
#P window linecount 2;
#P comment 11 85 27 196617 main left;
#P comment 107 85 30 196617 main right;
#P window linecount 1;
#P comment 145 96 23 196617 LFE;
#P comment 54 258 34 196617 Time;
#P number 51 271 45 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
#P hidden newex 176 244 23 196617 t b i;
#P hidden user uslider 176 113 24 112 128 1 0 0;
#P hidden newex 145 244 23 196617 t b i;
#P user uslider 145 113 24 112 128 1 0 0;
#P window linecount 2;
#P comment 11 240 27 196617 sur left;
#P comment 106 241 30 196617 sur right;
#P window linecount 1;
#P newex 12 292 177 196617 pack 1 2 3 4 5;
#P user pictslider 11 113 126 127 4 4 4 4 SliderDefaultKnob.pct 1
SliderDefaultBkgnd.pct 1 2163 0 8323072 127 1. 1.;
#N vpatcher 5 378 994 837;
#P origin -769 -52;
#P window setfont "Sans Serif" 9.;
#P newex 232 160 32 196617 t f 0.;
#P newex 133 160 32 196617 t f 0.;
#P newex 133 138 165 196617 if $f1 < = 0. then $f1 else out2 $f1;
#P newex 133 259 95 196617 panmodule2 -1 0;
#B color 5;
#P newex 232 259 90 196617 panmodule2 0 1;
#B color 5;
#P newex 506 249 102 196617 panmodule2 0 127;
#B color 5;
#P newex 665 294 105 196617 panmodule2 -1 1;
#B color 5;
#P comment 394 61 73 196617 Stereo Spread;
#P comment 506 61 31 196617 Time;
#P comment 494 395 117 196617 …then left-center-right or left-right;
#N vpatcher 60 55 444 345;
#P outlet 28 221 15 0;
#P inlet 28 82 15 0;
#P window setfont "Sans Serif" 9.;
#P number 28 107 43 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
#P flonum 28 195 56 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 87 154 66 196617 zmap 64 127 0. 1;
#P newex 28 155 55 196617 zmap 0 64 -1. 0.;
#P newex 87 132 65 196617 split 64 127;
#P newex 28 132 50 196617 split 0 64;
#P comment 93 94 247 196617 here’s one way to force 64 to be a center
value.;
#P comment 93 36 247 196617 remaining MIDI compatible by using controllers
that go from 0-127 makes it difficult to have a center control value ,
which is important for panning and pitch bend. (cf. MSP tutorial 22);
#P connect 8 0 7 0;
#P connect 7 0 2 0;
#P connect 2 0 4 0;
#P connect 4 0 6 0;
#P connect 5 0 6 0;
#P connect 6 0 9 0;
#P connect 2 1 3 0;
#P connect 3 0 5 0;
#P pop;
#P newobj 60 93 65 196617 p MIDImiddle;
#P newex 341 228 61 196617 pack 0. 100;
#P newex 341 249 30 196617 line~;
#P newex 341 203 37 196617 > 0.;
#P comment 290 61 23 196617 LFE;
#P comment 181 61 14 196617 Y;
#P newex 69 226 61 196617 pack 0. 100;
#N comlet (signal) Ch 6 – LFE;
#P outlet 917 378 15 0;
#P user gain~ 917 300 33 45 158 0 1.071519 7.94321 10.;
#P newex 69 247 30 196617 line~;
#P hidden newex 768 119 45 196617 loadbang;
#P hidden message 768 141 26 196617 100;
#P comment 815 165 24 196617 ms;
#P number 760 164 54 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
#P inlet 60 22 15 0;
#P newex 60 42 447 196617 unpack 1 2 3 4 5;
#P newex 324 302 27 196617 *~;
#P newex 69 301 27 196617 *~;
#P newex 201 351 27 196617 *~;
#P newex 218 318 38 196617 -~ 1;
#P newex 218 296 24 196617 +~;
#P newex 307 351 27 196617 *~;
#P newex 52 351 27 196617 *~;
#P newex 69 201 37 196617 < 0.;
#P newex 648 343 27 196617 *~;
#P newex 743 343 27 196617 *~;
#P newex 605 301 27 196617 *~;
#P newex 489 301 27 196617 *~;
#P comment 838 394 32 196617 0 , 1;
#P comment 838 409 69 196617 (front center);
#N comlet (signal) Ch 5 – Front Center;
#P outlet 838 378 15 0;
#N comlet (signal) Ch 1 – Rear Left;
#P outlet 648 378 15 0;
#N comlet (signal) Ch 2 – Front Left;
#P outlet 52 381 15 0;
#N comlet (signal) Ch 3 – Front Right;
#P outlet 307 381 15 0;
#N comlet (signal) Ch 4 – Rear Right;
#P outlet 743 378 15 0;
#P comment 743 394 32 196617 1 , -1;
#P comment 648 394 35 196617 -1 , -1;
#P comment 52 397 32 196617 -1 , 1;
#P comment 307 397 27 196617 1 , 1;
#P comment 52 412 58 196617 (front left);
#P comment 307 412 64 196617 (front right);
#N comlet (signal) Mono Input Signal;
#P inlet 37 21 16 0;
#P comment 6 37 34 196617 input signal;
#P comment 648 409 55 196617 (rear left);
#P comment 743 409 61 196617 (rear right);
#P comment 82 25 190 196617 left-right , front-back , lfe , spread ,
time;
#P comment 917 394 23 196617 LFE;
#P comment 71 61 14 196617 X;
#P comment 499 211 103 196617 first , signal is panned front-rear…;
#P user panel 465 198 181 129;
#X brgb 243 252 245;
#X frgb 0 0 0;
#X border 0;
#X rounded 0;
#X shadow 0;
#X done;
#P user panel 44 116 444 319;
#X brgb 218 245 244;
#X frgb 0 0 0;
#X border 0;
#X rounded 0;
#X shadow 0;
#X done;
#P user panel 832 294 124 135;
#X brgb 243 252 245;
#X frgb 0 0 0;
#X border 0;
#X rounded 0;
#X shadow 0;
#X done;
#P user panel 614 274 209 157;
#X brgb 218 245 244;
#X frgb 0 0 0;
#X border 0;
#X rounded 0;
#X shadow 0;
#X done;
#P fasten 25 0 30 0 494 340 57 340;
#P lcolor 8;
#P connect 30 0 20 0;
#P connect 38 0 37 0;
#P connect 37 0 52 0;
#P fasten 52 0 29 0 65 134 74 134;
#P connect 29 0 46 0;
#P connect 46 0 43 0;
#P connect 43 0 35 0;
#P connect 35 0 30 1;
#P fasten 59 0 35 1 138 294 91 294;
#P fasten 39 0 46 1 765 186 125 186;
#P fasten 52 0 60 0 65 132 138 132;
#P connect 60 0 61 0;
#P connect 61 0 59 0;
#P connect 62 1 59 0;
#P fasten 25 0 34 0 494 343 206 343;
#P lcolor 8;
#P fasten 39 0 59 1 765 188 223 188;
#P connect 59 1 32 0;
#P connect 32 0 33 0;
#P connect 33 0 34 1;
#P fasten 60 1 62 0 293 157 237 157;
#P connect 61 1 58 0;
#P connect 62 0 58 0;
#P connect 58 0 32 1;
#P fasten 25 0 31 0 494 347 312 347;
#P lcolor 8;
#P connect 31 0 19 0;
#P fasten 39 0 58 1 765 190 317 190;
#P fasten 58 1 36 0 317 295 329 295;
#P connect 36 0 31 1;
#P fasten 52 0 49 0 65 130 346 130;
#P connect 49 0 51 0;
#P connect 51 0 50 0;
#P connect 50 0 36 1;
#P fasten 39 0 51 1 765 192 397 192;
#P fasten 11 0 25 0 42 89 494 89;
#P lcolor 7;
#P fasten 37 1 57 0 174 109 511 109;
#P connect 57 1 25 1;
#P fasten 39 0 57 1 765 194 603 194;
#P fasten 11 0 26 0 42 87 610 87;
#P lcolor 7;
#P connect 57 0 26 1;
#P fasten 26 0 28 0 610 336 653 336;
#P lcolor 9;
#P connect 28 0 21 0;
#P fasten 52 0 56 0 65 128 670 128;
#P connect 56 0 28 1;
#P fasten 26 0 27 0 610 333 748 333;
#P lcolor 9;
#P connect 27 0 18 0;
#P fasten 37 4 39 0 501 75 765 75;
#P hidden connect 41 0 39 0;
#P connect 39 0 56 1;
#P connect 56 1 27 1;
#P hidden connect 42 0 41 0;
#P fasten 34 0 22 0 206 372 843 372;
#P fasten 11 0 44 0 42 85 922 85;
#P lcolor 7;
#P fasten 37 2 44 0 283 80 922 80;
#P connect 44 0 45 0;
#P pop;
#P newobj 14 368 126 196617 p panner;
#P user panel 0 56 214 241;
#X brgb 223 253 255;
#X frgb 0 0 0;
#X border 0;
#X rounded 0;
#X shadow 0;
#X done;
#P comment 34 346 43 196617 mono in;
#P comment 173 515 59 196617 pan list out;
#P comment 293 193 162 196617 arguments:;
#P hidden connect 35 0 5 0;
#P hidden fasten 12 0 6 0 181 268 17 268;
#P hidden fasten 5 0 6 0 16 260 17 260;
#P hidden fasten 10 0 6 0 150 276 17 276;
#P connect 26 0 4 0;
#P connect 4 0 20 0;
#P connect 4 1 21 0;
#P hidden connect 31 0 13 0;
#P hidden connect 35 4 13 0;
#P hidden fasten 5 1 6 1 132 267 58 267;
#P connect 4 2 22 0;
#P connect 4 3 23 0;
#P hidden fasten 10 1 6 2 163 266 99 266;
#P connect 4 4 24 0;
#P hidden connect 49 0 48 0;
#P hidden connect 48 0 49 0;
#P hidden connect 35 1 5 1;
#P connect 4 5 25 0;
#P fasten 6 0 4 1 17 319 135 319;
#P hidden fasten 12 1 6 3 194 279 140 279;
#P hidden connect 35 2 9 0;
#P hidden connect 9 0 10 0;
#P hidden connect 11 0 12 0;
#P hidden fasten 13 0 6 4 56 281 181 281;
#P hidden connect 32 0 31 0;
#P connect 29 0 35 0;
#P connect 50 0 35 0;
#P fasten 6 0 27 0 17 315 244 315;
#P fasten 48 2 53 0 478 460 288 460;
#P connect 53 0 52 0;
#P connect 52 0 42 0;
#P connect 48 1 51 0;
#P connect 51 0 50 0;
#P fasten 6 0 47 0 17 312 315 312;
#P connect 47 0 45 0;
#P connect 45 0 44 0;
#P connect 44 0 52 1;
#P connect 43 0 46 0;
#P connect 46 0 50 1;
#P connect 47 1 44 1;
#P pop;

http://www.johnhudak.net


October 6, 2008 | 10:45 pm

hello again folks,

i figured it out…"mtr" does the job of recording any kind of message, so
it works really well in this case…thanks for thinking, and have a nice
day.

john

ps. if anyone wants a copy of the redone patch, let me know.

best,

On Mon, Oct 6, 2008 at 9:27 AM, John Hudak wrote:

> Hello folks! I’m still working on this 5.1 project, and I found that part
> of the example patch
> (examples/spatialization/5-point-1-fun/5-point-1-panning.pat), has the
> ability to record and playback the automation of the pictslider, but doesn’t
> work. Upon examining the bpatcher, I don’t find the send "s
> #1-5.1automation-record" to have a matching receive anywhere.
>
> I am totally rusty at making and fixing patches, as I haven’t used
> Max/MSP/Jitter in over a year now. Could someone suggest a way to fix it so
> the recording works? I’m assuming that the coordinates get saved to a
> table, which should get saved when recording stops, and then sent to the
> recieve "r #1-5.1automation-play" for playback. The umenu doesn’t have a
> "stop" option for the recording either.
>
> Any help, or just suggestions would be appreciated.
>
> (I am totally embarassed at not being able to figure this out right away.)
>
> here is the patch:
>
> max v2;
> #N vpatcher 194 91 879 751;
> #P origin 9 -62;
> #P window setfont "Sans Serif" 9.;
> #P window linecount 1;
> #P comment 15 64 94 196617 panning automation;
> #P toggle 283 469 15 0;
> #P newex 283 488 37 196617 gate;
> #P toggle 292 70 15 0;
> #P newex 292 89 37 196617 gate;
> #P user umenu 111 63 58 196647 1 64 79 1;
> #X add off;
> #X add play;
> #X add record;
> #N vpatcher 10 59 325 298;
> #P window setfont "Sans Serif" 9.;
> #P window linecount 1;
> #P newex 201 138 50 196617 == 2;
> #P newex 107 138 50 196617 == 1;
> #P newex 21 98 50 196617 i;
> #P newex 21 138 61 196617 prepend set;
> #N comlet to automation mode menu;
> #P outlet 21 168 15 0;
> #P window linecount 2;
> #P comment 23 186 69 196617 to automation mode menu;
> #N comlet automation record gate;
> #P outlet 201 168 15 0;
> #N comlet automation playback gate;
> #P outlet 107 168 15 0;
> #P window linecount 1;
> #P newex 38 68 192 196617 r $1-5.1auto-mode;
> #N comlet from automation mode menu;
> #P inlet 21 30 15 0;
> #P window linecount 2;
> #P comment 108 186 75 196617 automation playback gate;
> #P comment 204 186 69 196617 automation record gate;
> #P window linecount 3;
> #P comment 40 27 69 196617 from automation mode menu;
> #P connect 3 0 10 0;
> #P connect 4 0 10 0;
> #P connect 10 0 9 0;
> #P connect 9 0 8 0;
> #P connect 10 0 11 0;
> #P connect 11 0 5 0;
> #P connect 10 0 12 0;
> #P connect 12 0 6 0;
> #P pop 1;
> #P newobj 111 25 372 196617 p automation-mode;
> #P newex 310 417 70 196617 t b l;
> #P newex 319 68 68 196617 route $0-;
> #P message 310 442 50 196617 $0-;
> #P newex 310 466 70 196617 zl join;
> #P newex 319 46 181 196617 r $1-5.1automation-play;
> #P newex 283 510 187 196617 s $1-5.1automation-record;
> #P window linecount 4;
> #P comment 294 254 162 196617 "#1" = $1 is used to connect the 5.1 panners
> with the master module otherwise known as "5.1record-monitor".;
> #P window linecount 3;
> #P comment 294 212 162 196617 "#0" = is used to by the automation system to
> indentify this 5.1 panner module.;
> #P window linecount 2;
> #P hidden comment 376 139 40 196617 Stereo Spread;
> #P window linecount 1;
> #P hidden comment 425 137 31 196617 Time;
> #P hidden comment 327 135 23 196617 LFE;
> #P hidden comment 278 136 14 196617 Y;
> #P newex 222 115 205 196617 unpack 1 2 3 4 5;
> #P hidden comment 233 135 14 196617 X;
> #P comment 99 272 24 196617 ms;
> #P hidden newex 215 214 45 196617 loadbang;
> #P hidden message 215 236 26 196617 100;
> #N comlet nothing;
> #P outlet 14 515 15 0;
> #N comlet pan list in;
> #P inlet 222 95 15 0;
> #P window linecount 3;
> #P comment 219 53 24 196617 pan list in;
> #N comlet pan list out;
> #P outlet 239 515 15 0;
> #N comlet mono in;
> #P inlet 14 346 15 0;
> #P window linecount 1;
> #P newex 128 492 108 196617 send~ $1-LFE;
> #P newex 106 472 108 196617 send~ $1-Center;
> #P newex 82 453 108 196617 send~ $1-RightS;
> #P newex 60 433 108 196617 send~ $1-LeftS;
> #P newex 36 413 108 196617 send~ $1-Right;
> #P newex 14 393 108 196617 send~ $1-Left;
> #P window linecount 2;
> #P hidden comment 169 86 38 196617 Stereo Spread;
> #P window linecount 1;
> #P comment 57 85 35 196617 center;
> #P window linecount 2;
> #P comment 11 85 27 196617 main left;
> #P comment 107 85 30 196617 main right;
> #P window linecount 1;
> #P comment 145 96 23 196617 LFE;
> #P comment 54 258 34 196617 Time;
> #P number 51 271 45 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
> #P hidden newex 176 244 23 196617 t b i;
> #P hidden user uslider 176 113 24 112 128 1 0 0;
> #P hidden newex 145 244 23 196617 t b i;
> #P user uslider 145 113 24 112 128 1 0 0;
> #P window linecount 2;
> #P comment 11 240 27 196617 sur left;
> #P comment 106 241 30 196617 sur right;
> #P window linecount 1;
> #P newex 12 292 177 196617 pack 1 2 3 4 5;
> #P user pictslider 11 113 126 127 4 4 4 4 SliderDefaultKnob.pct 1
> SliderDefaultBkgnd.pct 1 2163 0 8323072 127 1. 1.;
> #N vpatcher 5 378 994 837;
> #P origin -769 -52;
> #P window setfont "Sans Serif" 9.;
> #P newex 232 160 32 196617 t f 0.;
> #P newex 133 160 32 196617 t f 0.;
> #P newex 133 138 165 196617 if $f1 < = 0. then $f1 else out2 $f1;
> #P newex 133 259 95 196617 panmodule2 -1 0;
> #B color 5;
> #P newex 232 259 90 196617 panmodule2 0 1;
> #B color 5;
> #P newex 506 249 102 196617 panmodule2 0 127;
> #B color 5;
> #P newex 665 294 105 196617 panmodule2 -1 1;
> #B color 5;
> #P comment 394 61 73 196617 Stereo Spread;
> #P comment 506 61 31 196617 Time;
> #P comment 494 395 117 196617 …then left-center-right or left-right;
> #N vpatcher 60 55 444 345;
> #P outlet 28 221 15 0;
> #P inlet 28 82 15 0;
> #P window setfont "Sans Serif" 9.;
> #P number 28 107 43 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
> #P flonum 28 195 56 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
> #P newex 87 154 66 196617 zmap 64 127 0. 1;
> #P newex 28 155 55 196617 zmap 0 64 -1. 0.;
> #P newex 87 132 65 196617 split 64 127;
> #P newex 28 132 50 196617 split 0 64;
> #P comment 93 94 247 196617 here’s one way to force 64 to be a center
> value.;
> #P comment 93 36 247 196617 remaining MIDI compatible by using controllers
> that go from 0-127 makes it difficult to have a center control value ,
> which is important for panning and pitch bend. (cf. MSP tutorial 22);
> #P connect 8 0 7 0;
> #P connect 7 0 2 0;
> #P connect 2 0 4 0;
> #P connect 4 0 6 0;
> #P connect 5 0 6 0;
> #P connect 6 0 9 0;
> #P connect 2 1 3 0;
> #P connect 3 0 5 0;
> #P pop;
> #P newobj 60 93 65 196617 p MIDImiddle;
> #P newex 341 228 61 196617 pack 0. 100;
> #P newex 341 249 30 196617 line~;
> #P newex 341 203 37 196617 > 0.;
> #P comment 290 61 23 196617 LFE;
> #P comment 181 61 14 196617 Y;
> #P newex 69 226 61 196617 pack 0. 100;
> #N comlet (signal) Ch 6 – LFE;
> #P outlet 917 378 15 0;
> #P user gain~ 917 300 33 45 158 0 1.071519 7.94321 10.;
> #P newex 69 247 30 196617 line~;
> #P hidden newex 768 119 45 196617 loadbang;
> #P hidden message 768 141 26 196617 100;
> #P comment 815 165 24 196617 ms;
> #P number 760 164 54 9 0 0 0 3 0 0 0 221 221 221 222 222 222 0 0 0;
> #P inlet 60 22 15 0;
> #P newex 60 42 447 196617 unpack 1 2 3 4 5;
> #P newex 324 302 27 196617 *~;
> #P newex 69 301 27 196617 *~;
> #P newex 201 351 27 196617 *~;
> #P newex 218 318 38 196617 -~ 1;
> #P newex 218 296 24 196617 +~;
> #P newex 307 351 27 196617 *~;
> #P newex 52 351 27 196617 *~;
> #P newex 69 201 37 196617 < 0.;
> #P newex 648 343 27 196617 *~;
> #P newex 743 343 27 196617 *~;
> #P newex 605 301 27 196617 *~;
> #P newex 489 301 27 196617 *~;
> #P comment 838 394 32 196617 0 , 1;
> #P comment 838 409 69 196617 (front center);
> #N comlet (signal) Ch 5 – Front Center;
> #P outlet 838 378 15 0;
> #N comlet (signal) Ch 1 – Rear Left;
> #P outlet 648 378 15 0;
> #N comlet (signal) Ch 2 – Front Left;
> #P outlet 52 381 15 0;
> #N comlet (signal) Ch 3 – Front Right;
> #P outlet 307 381 15 0;
> #N comlet (signal) Ch 4 – Rear Right;
> #P outlet 743 378 15 0;
> #P comment 743 394 32 196617 1 , -1;
> #P comment 648 394 35 196617 -1 , -1;
> #P comment 52 397 32 196617 -1 , 1;
> #P comment 307 397 27 196617 1 , 1;
> #P comment 52 412 58 196617 (front left);
> #P comment 307 412 64 196617 (front right);
> #N comlet (signal) Mono Input Signal;
> #P inlet 37 21 16 0;
> #P comment 6 37 34 196617 input signal;
> #P comment 648 409 55 196617 (rear left);
> #P comment 743 409 61 196617 (rear right);
> #P comment 82 25 190 196617 left-right , front-back , lfe , spread ,
> time;
> #P comment 917 394 23 196617 LFE;
> #P comment 71 61 14 196617 X;
> #P comment 499 211 103 196617 first , signal is panned front-rear…;
> #P user panel 465 198 181 129;
> #X brgb 243 252 245;
> #X frgb 0 0 0;
> #X border 0;
> #X rounded 0;
> #X shadow 0;
> #X done;
> #P user panel 44 116 444 319;
> #X brgb 218 245 244;
> #X frgb 0 0 0;
> #X border 0;
> #X rounded 0;
> #X shadow 0;
> #X done;
> #P user panel 832 294 124 135;
> #X brgb 243 252 245;
> #X frgb 0 0 0;
> #X border 0;
> #X rounded 0;
> #X shadow 0;
> #X done;
> #P user panel 614 274 209 157;
> #X brgb 218 245 244;
> #X frgb 0 0 0;
> #X border 0;
> #X rounded 0;
> #X shadow 0;
> #X done;
> #P fasten 25 0 30 0 494 340 57 340;
> #P lcolor 8;
> #P connect 30 0 20 0;
> #P connect 38 0 37 0;
> #P connect 37 0 52 0;
> #P fasten 52 0 29 0 65 134 74 134;
> #P connect 29 0 46 0;
> #P connect 46 0 43 0;
> #P connect 43 0 35 0;
> #P connect 35 0 30 1;
> #P fasten 59 0 35 1 138 294 91 294;
> #P fasten 39 0 46 1 765 186 125 186;
> #P fasten 52 0 60 0 65 132 138 132;
> #P connect 60 0 61 0;
> #P connect 61 0 59 0;
> #P connect 62 1 59 0;
> #P fasten 25 0 34 0 494 343 206 343;
> #P lcolor 8;
> #P fasten 39 0 59 1 765 188 223 188;
> #P connect 59 1 32 0;
> #P connect 32 0 33 0;
> #P connect 33 0 34 1;
> #P fasten 60 1 62 0 293 157 237 157;
> #P connect 61 1 58 0;
> #P connect 62 0 58 0;
> #P connect 58 0 32 1;
> #P fasten 25 0 31 0 494 347 312 347;
> #P lcolor 8;
> #P connect 31 0 19 0;
> #P fasten 39 0 58 1 765 190 317 190;
> #P fasten 58 1 36 0 317 295 329 295;
> #P connect 36 0 31 1;
> #P fasten 52 0 49 0 65 130 346 130;
> #P connect 49 0 51 0;
> #P connect 51 0 50 0;
> #P connect 50 0 36 1;
> #P fasten 39 0 51 1 765 192 397 192;
> #P fasten 11 0 25 0 42 89 494 89;
> #P lcolor 7;
> #P fasten 37 1 57 0 174 109 511 109;
> #P connect 57 1 25 1;
> #P fasten 39 0 57 1 765 194 603 194;
> #P fasten 11 0 26 0 42 87 610 87;
> #P lcolor 7;
> #P connect 57 0 26 1;
> #P fasten 26 0 28 0 610 336 653 336;
> #P lcolor 9;
> #P connect 28 0 21 0;
> #P fasten 52 0 56 0 65 128 670 128;
> #P connect 56 0 28 1;
> #P fasten 26 0 27 0 610 333 748 333;
> #P lcolor 9;
> #P connect 27 0 18 0;
> #P fasten 37 4 39 0 501 75 765 75;
> #P hidden connect 41 0 39 0;
> #P connect 39 0 56 1;
> #P connect 56 1 27 1;
> #P hidden connect 42 0 41 0;
> #P fasten 34 0 22 0 206 372 843 372;
> #P fasten 11 0 44 0 42 85 922 85;
> #P lcolor 7;
> #P fasten 37 2 44 0 283 80 922 80;
> #P connect 44 0 45 0;
> #P pop;
> #P newobj 14 368 126 196617 p panner;
> #P user panel 0 56 214 241;
> #X brgb 223 253 255;
> #X frgb 0 0 0;
> #X border 0;
> #X rounded 0;
> #X shadow 0;
> #X done;
> #P comment 34 346 43 196617 mono in;
> #P comment 173 515 59 196617 pan list out;
> #P comment 293 193 162 196617 arguments:;
> #P hidden connect 35 0 5 0;
> #P hidden fasten 12 0 6 0 181 268 17 268;
> #P hidden fasten 5 0 6 0 16 260 17 260;
> #P hidden fasten 10 0 6 0 150 276 17 276;
> #P connect 26 0 4 0;
> #P connect 4 0 20 0;
> #P connect 4 1 21 0;
> #P hidden connect 31 0 13 0;
> #P hidden connect 35 4 13 0;
> #P hidden fasten 5 1 6 1 132 267 58 267;
> #P connect 4 2 22 0;
> #P connect 4 3 23 0;
> #P hidden fasten 10 1 6 2 163 266 99 266;
> #P connect 4 4 24 0;
> #P hidden connect 49 0 48 0;
> #P hidden connect 48 0 49 0;
> #P hidden connect 35 1 5 1;
> #P connect 4 5 25 0;
> #P fasten 6 0 4 1 17 319 135 319;
> #P hidden fasten 12 1 6 3 194 279 140 279;
> #P hidden connect 35 2 9 0;
> #P hidden connect 9 0 10 0;
> #P hidden connect 11 0 12 0;
> #P hidden fasten 13 0 6 4 56 281 181 281;
> #P hidden connect 32 0 31 0;
> #P connect 29 0 35 0;
> #P connect 50 0 35 0;
> #P fasten 6 0 27 0 17 315 244 315;
> #P fasten 48 2 53 0 478 460 288 460;
> #P connect 53 0 52 0;
> #P connect 52 0 42 0;
> #P connect 48 1 51 0;
> #P connect 51 0 50 0;
> #P fasten 6 0 47 0 17 312 315 312;
> #P connect 47 0 45 0;
> #P connect 45 0 44 0;
> #P connect 44 0 52 1;
> #P connect 43 0 46 0;
> #P connect 46 0 50 1;
> #P connect 47 1 44 1;
> #P pop;
>
> –
> http://www.johnhudak.net
>

http://www.johnhudak.net


Viewing 2 posts - 1 through 2 (of 2 total)