|
|
Dec 5, 2010 at 11:37pm
Fading control AC lighting interface question.
Hello.
I’d like to fade in/out simple incandescent lighting control from MAXMSP.
I was thinking Arduino signal from sensor to control dimming, but I changed max/msp control to dimming.
so, I have velleman K8064 DC control AC dimmer (voltage based dimmer) to connect AC lighting.
Is there any other way to dimming control lightings with maxmsp not through Arduino?
any other hardware interface?
|
|
|
Dec 6, 2010 at 12:10am
there might be a way through DMX or MIDI, not sure. Certainly is possible but I don’t know the specs or cost…
|
|
|
Dec 6, 2010 at 12:59am
|
|
|
Dec 6, 2010 at 1:28am
Thanks for the link Jesse.
Do I need DMXUSB PRO to connect DMX-4 for controlling from Max?
Hopefully someone helps me the simplest and cheapest way for MAX controls AC commercial lighting.
Thanks
|
|
|
Dec 6, 2010 at 8:46am
from what I know the cheapest solution is with arduino. Why don’t you go with that?
|
|
|
Dec 6, 2010 at 8:53am
If you want cheap, go with the arduino.
If you want simple, the Enttec DMX USB Pro is your best bet. I have used this with the DMX-4 and it works well.
|
