Forums > MaxMSP

help please?

March 16, 2014 | 5:44 pm

Hi there I am new to the max patching world.

I have been doing a basic interactive music quiz with sounds being played once buttons are being clicked.

The sound was working ok until I saved the file and closed max 5 down. I opened it up to see if it would work and everything was there but when I pressed the buttons no sound was being generated.

Any help would be appreciated

Thanks


March 16, 2014 | 6:20 pm

…you forgot to turn audio on.


March 16, 2014 | 6:32 pm

Thanks for the reply.
My speakers were not switched off.
Is there an audio button in one of the menus?


March 16, 2014 | 6:38 pm

yes.
… options, audio status.
common.


March 16, 2014 | 11:04 pm

[loadbang]
|
"1"
|
[dac~]


March 17, 2014 | 10:53 am

Hi again.
Ive tried both of the above and there is still no audio. I even tried to create a new patch and there is no audio in that either


March 17, 2014 | 11:21 am

From the Extras menu, select "Audiotester". About halfway down, on the left, change the Source menu from "off" to "Oscillator". Any sound or visual feedback?

If no, click on the speaker icon on the right side. Is it yellow? Any change?

If still no, open up "Audio Status" from the Options menu. Make sure Audio is on, and the the driver settings seem like what you would expect.

What OS?


March 17, 2014 | 11:35 am

Hi mzed
I tried all of the above and there is noise and visual feedback but when i clock my button to play a musical note in my patch there is still no sound
I am using windows xp


March 17, 2014 | 2:21 pm

well at this point you should post the patch, mabye there is just something wrong in the patch.


Viewing 9 posts - 1 through 9 (of 9 total)