Forums > MaxMSP

ignal controlled quad panner

May 30, 2007 | 1:52 pm

Hello masters of spatialisation

I am using the signal controlled quad panner and tryed to let it rotate in two directions at the same time. This gives me clicks.

Is it because it is buffer based and there is some reading error?
Can we use thet object to have miltiple rotations at different speeds and duration simultaneously?


May 30, 2007 | 2:36 pm

You will probably have to use multiple panners – one for each path. You
will also have to separate the reverbs from the panners to save cpu. I did
this by rewriting spat~.

On 5/30/07 9:52 AM, "Hans Mittendorf" wrote:

>
> Hello masters of spatialisation
>
> I am using the signal controlled quad panner and tryed to let it rotate in two
> directions at the same time. This gives me clicks.
>
> Is it because it is buffer based and there is some reading error?
> Can we use thet object to have miltiple rotations at different speeds and
> duration simultaneously?

Cheers
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson


May 30, 2007 | 5:40 pm

Is the spat object from IRCAM? I do not have that one. Or do you work under 4.5?
In any case, I made a second patch from Pan4S and I think it works without clicks now.


May 30, 2007 | 8:46 pm

I think spat4~ is/was an abstraction

On 5/30/07 1:40 PM, "Hans Mittendorf" wrote:

>
> Is the spat object from IRCAM? I do not have that one. Or do you work under
> 4.5?
> In any case, I made a second patch from Pan4S and I think it works without
> clicks now.

Cheers
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson


May 30, 2007 | 8:48 pm

Here’s one I made with multiouts~

#P window setfont "Sans Serif" 9.;
#P window linecount 1;
#P newex 380 470 100 196617 send~ RightRearWet;
#P newex 428 446 95 196617 send~ LeftRearWet;
#P newex 118 467 100 196617 send~ RightRearDry;
#P newex 158 447 95 196617 send~ LeftRearDry;
#P newex 334 492 79 196617 send~ RightWet;
#P newex 286 515 74 196617 send~ LeftWet;
#P newex 73 489 79 196617 send~ RightDry;
#P newex 34 511 74 196617 send~ LeftDry;
#P comment 127 512 100 196617 4 out to direct (dry);
#P newex 217 228 40 196617 mod 1.;
#P newex 72 284 60 196617 loadmess 2;
#P newex 359 208 27 196617 *~;
#P newex 358 260 34 196617 +~ 1.;
#P newex 359 235 41 196617 *~ 31.;
#P newex 359 168 30 196617 line~;
#B color 14;
#P newex 426 400 27 196617 *~;
#P newex 379 399 27 196617 *~;
#P newex 170 397 27 196617 *~;
#P newex 126 397 27 196617 *~;
#P newex 332 399 27 196617 *~;
#P newex 286 399 27 196617 *~;
#P newex 78 395 27 196617 *~;
#P newex 34 395 27 196617 *~;
#P newex 411 336 32 196617 !/~ 1;
#P newex 411 314 33 196617 sqrt~;
#P newex 244 313 32 196617 !/~ 1;
#P newex 216 201 53 196617 line 0. 50;
#B color 14;
#P newex 216 169 63 196617 pack 0. 100;
#N comlet slew time;
#P inlet 456 67 15 0;
#N comlet distance;
#P inlet 359 66 15 0;
#P comment 134 171 68 196617 location , time;
#N comlet spat message: azi dist time;
#P inlet 216 69 15 0;
#N comlet audio in;
#P inlet 33 69 15 0;
#P newex 359 138 88 196617 pack 0. 100;
#P newex 34 314 67 196617 multiouts~ 4;
#P comment 53 69 42 196617 audio in;
#P comment 473 139 77 196617 distance , time;
#P window linecount 2;
#P comment 412 202 100 196617 exponential for distance;
#P window linecount 1;
#P comment 375 517 151 196617 4 out to shared reverb (wet);
#P window linecount 3;
#P comment 461 315 100 196617 amp scaling for wet as a function of distance;
#P window linecount 1;
#P comment 115 315 121 196617 sig , loc , dis , slew time;
#P window linecount 3;
#P comment 282 314 100 196617 amp scaling for dry as a function of distance;
#P window linecount 1;
#P comment 126 229 81 196617 phase wraps;
#P connect 19 0 22 1;
#P connect 19 0 23 1;
#P connect 19 0 26 1;
#P connect 19 0 27 1;
#P fasten 14 0 8 3 461 304 96 304;
#P fasten 14 0 15 1 461 99 274 99;
#P connect 14 0 9 1;
#P connect 27 0 41 0;
#P connect 8 3 25 0;
#P connect 8 3 27 0;
#P connect 18 0 19 0;
#P connect 30 0 17 0;
#P connect 30 0 18 0;
#P connect 26 0 42 0;
#P connect 8 2 24 0;
#P connect 8 2 26 0;
#P connect 28 0 31 0;
#P connect 28 0 31 1;
#P connect 31 0 29 0;
#P connect 9 0 28 0;
#P connect 13 0 9 0;
#P connect 29 0 30 0;
#P connect 23 0 38 0;
#P connect 8 1 21 0;
#P connect 8 1 23 0;
#P connect 22 0 37 0;
#P connect 8 0 20 0;
#P connect 8 0 22 0;
#P connect 16 0 33 0;
#P connect 15 0 16 0;
#P connect 11 0 15 0;
#P connect 17 0 20 1;
#P connect 17 0 21 1;
#P connect 17 0 24 1;
#P connect 17 0 25 1;
#P connect 25 0 39 0;
#P connect 24 0 40 0;
#P connect 21 0 36 0;
#P connect 32 0 8 2;
#P fasten 33 0 8 1 222 271 58 271;
#P connect 20 0 35 0;
#P connect 10 0 8 0;
#P window clipboard copycount 43;

On 5/30/07 1:40 PM, "Hans Mittendorf" wrote:

>
> Is the spat object from IRCAM? I do not have that one. Or do you work under
> 4.5?
> In any case, I made a second patch from Pan4S and I think it works without
> clicks now.

Cheers
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson


May 30, 2007 | 10:09 pm


Viewing 6 posts - 1 through 6 (of 6 total)