forge13

I am using a slider object to control 2 applications via OSC. The slider is set to range between -80 and +3 to control the initial application.

To then control the other application I need to scale the slider amount to 100, so I multiply the signal by -1.2 to alter the range and switch it to positive.

However, this causes the following. As the value of the slider is raised, the number value to the 2nd application reduces. Is there a way to invert the signal going to the number box?

example patch below. any help would be greatly appreciated!

inverting-max-signals-from-slider

Scale provides one solution. Not sure of the precise range you want on the second output though. If you want it to go from 0 (or 1) to 100, just replace those values as the last two arguments to the scale object.

Scale provides one solution. Not sure of the precise range you want on the second output though. If you want it to go from 0 (or 1)  to 100, just replace those values as the last two arguments to the scale object.

that's a far better scaling solution! thanks a lot for that. And the range of 100 is spot on. just need to make it so that second output is at 0 when the first is at -80 and at 100 when the first is at +3

I've altered the scale object to -80. 3. 1. 100 and thats solved the issue!

Inverting Max signals from slider