Forums > Jitter

Jitter and ILDA laser format


Wei
August 18, 2012 | 11:05 pm

Hi all

is there anyone knows about how use serial object to talk to the laser projector via USB in ILDA laser format?

http://www.laserist.org/StandardsDocs/IDTF05-finaldraft.pdf

I want to generate jitter matrix in order to control the projector on the fly.

if it is too hard, then is there anyone know how to control galvometer by arduino?

Many thanks

Luke


December 10, 2013 | 9:20 am

hello ! I don’t now how to do this but i was looking for something simular !

I would like to make the laser beams from a ilda laser moves imultaneously with lasersound produced in ableton live . lfo / ratio etc ..

this must be possible i guess !!

can’t find anything about it on the internet.
hopefully write the code myself someday :)



dtr
December 11, 2013 | 7:43 am

See the comments here: http://cycling74.com/project/fragile-territories/

Analog control signals are relatively easily generated in Max/MSP and sent out through a suitable audio interface (eg. MOTU) or a dedicated DC interface.

Next thing I’d like to figure out is how to convert vector/opengl graphics to ILDA.

Think about safety when working with lasers.



Wei
December 11, 2013 | 9:38 am

yes i saw this project! it’s DREAMY.

http://cycling74.com/project/fragile-territories/

it is sound based? but it is already very "graphically", so it only sent the sound to multiple channels to 4 laser projectors? i use to tried sound card method but my m-audio410 only gives 0~24v, laser projectors requires -24~24V, that’s the problem. anyway, do i need to modify the circuit in MOTU? if not then it is very good news! i hope Robert Henke can share some patch, just for the sound control…



dtr
December 11, 2013 | 12:01 pm

It’s highly unlikely that your m-audio outputs 0-24V. A standard audio signal oscillates from + to – (AC) and 24V would crazy loud for a line output. Around 5V would be more logical. My MOTU 828mk2 outputs +/-4.5V and my UltraLite mk3 +/-4.1V.

If your laser needs +/-24V then you will need an opamp to get the signal into that range. I recently worked with +/-5V lasers so it didn’t need amplification.

Important is that the audio interface has to be able to output DC signals. Most filter out DC as a protection. MOTU is one of the exceptions that allow DC and thus can be used for analog control signals.

See this thread too: http://cycling74.com/forums/topic/controlling-analog-synths-from-max

About ‘sound control’, the point that you seem to be missing is that you use audio DSP processes to generate control signals. Is it ‘sound’? In a way, but any DSP signal only becomes sound when transduced by a speaker. Before that it’s just digital numbers or analog voltages that can just as well be used to control the motion of a laser scanner or the intensity of a beam. That’s what’s happening here. It’s perhaps more helpful to see it as LFO’s. If you can draw shapes in an X/Y oscilloscope you can draw them with a laser.


July 8, 2014 | 5:57 am

I’ve found out this project but the author won’t reply to messages.
It is basically a porting of OpenLase and requires jack for the
routing.

I’ve tried to compile without great success.

https://github.com/edy555/openlase-max-jitter

Anyway, I’m having very good results with lasers driven by Max,
here’s just two basic experiments.

Video #1 https://www.facebook.com/photo.php?v=1593867287506191&l=288672395136389244
Video #2 https://www.facebook.com/photo.php?v=1593888550837398&l=6617172875675449459


Viewing 6 posts - 1 through 6 (of 6 total)