Forums > MaxMSP

Luigi Castelli's objects UB?

October 3, 2007 | 2:49 pm

Mac.objects leads only to the CFM versions of these externals. Have they
been update for Intel?

Cheers
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson



kjg
January 15, 2008 | 2:07 am

Since sawtooth~ and pulse~ are now pretty much redundant because of saw~ and rect~ (included with max), and quadpan~ and quadxfade~ are relatively easily replaced by an abstraction using a few constant power panners, I’m assuming these are not gonna be updated to UB any time soon…

I’m still hoping to find a good replacement of blit~ though.
Any suggestions for an external implementing a band limited impulse train would be highly appreciated.

Luigi, if you are reading this.. Would you consider recompiling blit~ for UB at some point?

Regards,
kjg


January 15, 2008 | 12:30 pm

On 15 Jan 2008, at 03:07, Klaas-Jan Govaart wrote:

>
> Since sawtooth~ and pulse~ are now pretty much redundant because of
> saw~ and rect~ (included with max), and quadpan~ and quadxfade~ are
> relatively easily replaced by an abstraction using a few constant
> power panners, I’m assuming these are not gonna be updated to UB
> any time soon…
>
> I’m still hoping to find a good replacement of blit~ though.
> Any suggestions for an external implementing a band limited impulse
> train would be highly appreciated.

i have done a blit (dsf) external which is ub.
will upload tonight.
vb


January 16, 2008 | 12:31 pm


January 16, 2008 | 12:51 pm

Stefan Tiedje schrieb:
> I made a comparison between the three

I want to add, that on high frequencies rect~ is not really antialiazed.
Its pretty bad, whereas blit~ is just fine and has no rollof at all…

Stefan


Stefan Tiedje————x——-
–_____———–|————–
–(_|_ —-|—–|—–()——-
– _|_)—-|—–()————–
———-()——–www.ccmix.com



kjg
January 16, 2008 | 1:57 pm



kjg
January 16, 2008 | 2:20 pm

by the way:
i just compared blit~ with vb.blit~ and Volker’s external _does_ do it correctly a low frequencies.


November 8, 2009 | 12:19 pm

how is possible to download it?

i cannot find the vb.blit object in the zip file, just the help file…


November 8, 2009 | 1:25 pm

Oki, it was for Mac and not for windows!…but how i can find some blit object to download and use for windows?

i need some impulse train generator that works with frequency and not with msec. and works in max 4.5 for windows.

anyone knows how i can do?

i’ve implemented the impulse train generator with a long wavetable of 1 sec, and a simple impulse, looping it with the groove object. but, the groove object works with msec and the approximation from freq to msec (because of the floating point maximum of 6 decimals) is not so perfect.

or it is possible to use floating point number with more than 6 points after the float.point?

Thank you


Viewing 9 posts - 1 through 9 (of 9 total)