Kasper

i use a lan box with max since quite some time - I ususally send list (which I create with [pak] of channel-value) which are generally not very long - some 10 pairs maximum...

Now for a project I have to address channel numbers which start from 400 ; my patch was working with "normal" numabers (between 1à and 40) So I was hoping to just change the numbers of the channels - but no, seems that lanBox is by default in 8 bit mode, and to use those numbers it has to be in 16 bit...

I can turn it in 16 bits but then do not know how to send more that ONE channel at a time.

Does anyone know how to send lists of channel-value to a lanbox where the channel numbers are 400 and plus (to format the message in 16bit if I understand)

Hi
i use a lan box with max since quite some time - I ususally send list (which I create with [pak] of channel-value) which are generally not very long - some 10 pairs maximum...

Now for a project I have to address channel numbers which start from 400 ; my patch was working with "normal" numabers (between 1à and 40) So I was hoping to just change the numbers of the channels - but no, seems that lanBox is by default in 8 bit mode, and to use those numbers it has to be in 16 bit...
I can turn it in 16 bits but then do not know how to send more that ONE channel at a time.

max-lanbox-in-16-bit

You need to set the lanbox to 16bit mode. It's like the very first thing mentioned in its reference; Common16BitMode.

I just went (quickly) AGAIN trough the user manual (even downloaded the latest version) and I do not see mention of setting it to 16 bit mode. Would you have a link, please?

max & LanBox in 16 bit?