Forums > MaxMSP

No Sound!

March 30, 2006 | 1:53 am

I am running on a older iMac G3 with MAX/MSP and the noise~ object will not work. the Cycle~ object will not work and the vst~ / dac~ will not produce sound on a consistant basis. When I open a patch what will happen is that it will work fine, but once you click the
~dac off NO MORE SOUNDS WILL WORK. My setup is fine buil-in audio and ~dac setting are fine also. the Audiotester in the extras menu also working upon a reboot (most of the time) but after you hit the stop message. NO MORE SOUNDS WILL WORK. Help!


March 30, 2006 | 2:14 am

Once you click ~dac off no sound is supposed to come out. So that is
normal
When you click ~dac "on" after that does sound come out?


March 30, 2006 | 2:26 am

This means you have a max only authorization. MSP is in demo mode
(i.e. only works the first time audio is turned on). If you’ve
purchased both Max and MSP, please contact challenge@cycling74.com or
support@cycling74.com to get an authorization response which
authorizes both Max *and* MSP.

-Joshua


Viewing 3 posts - 1 through 3 (of 3 total)