Forums > MaxMSP

pitchbend in max???

February 27, 2007 | 4:10 am

Sooooo

I have en external controller thats not midi, im scaling the raw data to 0-127 so i can use it as midi. im sending the data ctlout. everyhting is working fine, but i want to automatically route the data to the pitch bend. i see the right inlet is the cc#, but is there something i can put in there to automatically route it to a synths pitchbend, or will i have to do it manually? i know i can assign it a cc#, but is there a GM # for pitchbend? or does max have a pitchbend cc?

thnks

L-


February 27, 2007 | 4:44 am

bendout

On Feb 26, 2007, at 11:10 PM, Larry Ursini wrote:

>
> Sooooo
>
> I have en external controller thats not midi, im scaling the raw
> data to 0-127 so i can use it as midi. im sending the data ctlout.
> everyhting is working fine, but i want to automatically route the
> data to the pitch bend. i see the right inlet is the cc#, but is
> there something i can put in there to automatically route it to a
> synths pitchbend, or will i have to do it manually? i know i can
> assign it a cc#, but is there a GM # for pitchbend? or does max
> have a pitchbend cc?
>
> thnks
>
>
> L-
>


February 27, 2007 | 4:46 am

bendout

At 9:10 PM -0700 2/26/07, Larry Ursini wrote:
>Sooooo
>
>I have en external controller thats not midi, im scaling the raw data to 0-127 so i can use it as midi. im sending the data ctlout. everyhting is working fine, but i want to automatically route the data to the pitch bend. i see the right inlet is the cc#, but is there something i can put in there to automatically route it to a synths pitchbend, or will i have to do it manually? i know i can assign it a cc#, but is there a GM # for pitchbend? or does max have a pitchbend cc?
>
>thnks
>
>
>L-


Chris Muir | "There are many futures and only one status quo.
cbm@well.com | This is why conservatives mostly agree,
http://www.xfade.com | and radicals always argue." – Brian Eno


February 27, 2007 | 5:08 am

thanks!!!!


February 27, 2007 | 5:03 pm

Larry Ursini wrote:
> Sooooo
>
> I have en external controller thats not midi, im scaling the raw data
> to 0-127 so i can use it as midi. im sending the data ctlout.
> everyhting is working fine, but i want to automatically route the
> data to the pitch bend.

Beware, pitchbend needs a higher resolution than controllers. If your
external controler delivers more, don’t trash it. And then use xbendout
which would keep the high resolution…

Stefan


Stefan Tiedje————x——-
–_____———–|————–
–(_|_ —-|—–|—–()——-
– _|_)—-|—–()————–
———-()——–www.ccmix.com


Viewing 5 posts - 1 through 5 (of 5 total)