clankill3r

I have readed things about buffer and import but i hear nothing when i try those things.

play-a-mp3

I'm not 100% sure but I don't believe MAX natively supports mp3's or oggs or any other high-type format.

Your best bet is to convert the file yourself to a type that is supported, such as aiff or wav.

the trick is to use the "import" message...at least that is how i do it to read any file. Hope this helps.

the trick is to use the "import" message...at least that is how i do it to read any file.  Hope this helps.


i had this issue with an MP3 and found the import message just wasnt working, i got round it by saving the MP3 as a wav and used the read message. i understand this is not ideal but as wav is an uncompressed format the mp3 doesn't gain or lose any frequency content or size.

below is my patch as you'll see the read message is for VBR and CBR converted MP3s.

i had this issue with an MP3 and found the import message just wasnt working, i got round it by saving the MP3 as a wav and used the read message. i understand this is not ideal but as wav is an uncompressed format the mp3 doesn't gain or lose any frequency content or size. 

i had this issue with an MP3 and found the import message just wasnt working

What exactly wasn't working? I've never had any problem with 

 has to convert the MP3 into PCM audio it could take a while). Did you have a problem on Windows? I think 

 using QuickTime for the conversion, so maybe there was some issue with your QuickTime install—I'm not really sure, just guessing.

as wav is an uncompressed format the mp3 doesn't gain or lose any frequency content or size

Maybe I'm misunderstanding you, but while there should be no quality change going from MP3 -> WAV at the same sampling rate the file size will certainly get bigger.

What exactly wasn't working? I've never had any problem with < import > (keep in mind that since < import > has to convert the MP3 into PCM audio it could take a while).  Did you have a problem on Windows? I think buffer~ using QuickTime for the conversion, so maybe there was some issue with your QuickTime install—I'm not really sure, just guessing.

Maybe I'm misunderstanding you, but while there should be no quality change going from MP3 -> WAV at the same sampling rate the file size will certainly get bigger.


buffer~ uses Quicktime to import non-native formats like mp3. In my experience, on the Mac it works OK, but in Windows it takes a looong time; it becomes irresponsive and seems like Max crashed and then comes to life again.

If you search the forums, you'll notice this is a recurring problem. But if you're on Mac OS X, it should work fine...

https://cycling74.com/forums/slow-mp3-import-under-windows

buffer~ uses Quicktime to import non-native formats like mp3. In my experience, on the Mac it works OK, but in Windows it takes a looong time; it becomes irresponsive and seems like Max crashed and then comes to life again.
If you search the forums, you'll notice this is a recurring problem. But if you're on Mac OS X, it should work fine...

Example:
https://cycling74.com/forums/slow-mp3-import-under-windows


there is nothing to call "support" for mp3 in max. you can waste your time trying the quicktime method, but it ends up converting to wave (at least so on windows).

play a mp3