Forums > MaxMSP

problem with the HI object

April 27, 2013 | 7:48 am

Hello everyone,

I’m having a problem, or what might be a problem, with the "HI" object. I am trying to use it with my graphic tablet, an Intuos5 M. The HI object does find it (it shows in the menu), but when I select it, no data comes out at all. Do you have any trick on this? (By the way, I’m on MAX6.1)

Thanks for your help.


April 27, 2013 | 8:11 am

hi,

try the s2m.wacom object found here instead:

http://metason.cnrs-mrs.fr/Resultats/MaxMSP/index.html

or seek out the original wacom object, which does have issues, but works.


April 28, 2013 | 8:18 am

Thanks! I’ll try that!


April 29, 2013 | 7:12 am

Hey,

Sorry, if this is not applicable to you.

You may have already tried this but I have found that when I use [hi] the device needs to be plugged in before I start Max up. If I plug it in after Max has loaded, then it appears in the menu as you say but no data comes out. If the device is plugged in prior to running Max, then data does come out.

Joe


Viewing 4 posts - 1 through 4 (of 4 total)