Cycling 74 » Topic: Reading bpatcher data from outside via pattr system? http://cycling74.com/forums/topic/reading-bpatcher-data-from-outside-via-pattr-system/feed Tue, 18 Jun 2013 00:56:02 +0000 http://bbpress.org/?v=2.2.4 http://cycling74.com/forums/topic/reading-bpatcher-data-from-outside-via-pattr-system/#post-53323 <![CDATA[Reading bpatcher data from outside via pattr system?]]> http://cycling74.com/forums/topic/reading-bpatcher-data-from-outside-via-pattr-system/#post-53323 Mon, 15 Nov 2010 04:04:54 +0000 Peter Ostry I have a main patch with a bpatcher. Both have objects which are bound to the pattr system via pattrstorage and autopattr. The pattr system is new to me but I learned the basics, can use it with a bpatcher and store presets.

But I need more than maintaining object states. Here comes the question:

I have a couple of LEDs (actually over 40) in the bpatcher. I turn them on or off by mouse clicks. But I also want to set them from the outside, from the main patch. I need to say, “bpatcher, turn your LED number 37 on!” And, vice versa, if I click on a LED within the bpatcher, this should be heard on the outside.

Can I use my existing pattr system for that or do I need cables or sends between the objects? I tried to store and recall at each mouse click but that goes quite complicated, I suspect it is not the right way.

—

If this was not clear, I spare you the mess with my poor English. I prepared a small example and attached it as a .zip file to this mail (couldn’t make a working text copy, probably because of the bpatcher).

]]> http://cycling74.com/forums/topic/reading-bpatcher-data-from-outside-via-pattr-system/#post-191822 <![CDATA[Re: Reading bpatcher data from outside via pattr system?]]> http://cycling74.com/forums/topic/reading-bpatcher-data-from-outside-via-pattr-system/#post-191822 Mon, 15 Nov 2010 05:26:46 +0000 Peter Ostry Solved, stop thinking ;-)
Send/Receive with the [autopattr] in a bpatcher does the trick.

]]>