sensors and wireless transmitting

Feb 9, 2008 at 2:52am

sensors and wireless transmitting

Is there a solution for wireless transmitting of data generated by sensors?

I am currently working on a project where that is need.

Loom

#35733
Feb 9, 2008 at 5:03am

bluetoth arduino would work unless you need wide coverage.

http://www.arduino.cc/en/Guide/ArduinoBT

You could use a wireless network, like wifi, and transmit data via OSC to and from Max. I’ve read some wifi routers actually being able to be hacked to run as wireless devices.

I believe some control boards might be able to run off a wifi with a USB network stick, but I’m not positive about that.

I’s start with the arduino, they’re relatively cheap, the bluetooth model’s the most expensive.

#122138
Feb 9, 2008 at 3:26pm

hello… I was interested in this thing, investigate a little, and found some good options, here you have the links:

for midi wireless, the best:

http://www.musik-service.de/-prx395759292es.aspx

in think this bluetooth based best:

http://infusionsystems.com/catalog/product_info.php/products_id/98

#122139
Feb 9, 2008 at 3:42pm

The picture shows both a USB and a DC connector. There isn’t much
description. How is this wireless?

On 2/9/08 10:26 AM, “gamuso” wrote:

> for midi wireless, the best:
> http://www.musik-service.de/-prx395759292es.aspx

Cheers,
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson

#122140
Feb 9, 2008 at 3:43pm

Arduino

On 2/8/08 9:52 PM, “Martin Hansen” wrote:

>
> Is there a solution for wireless transmitting of data generated by sensors?
>
> I am currently working on a project where that is need.
>
> Loom
> –
> Loom
> Sound arts design . net

Cheers,
Gary Lee Nelson
Oberlin College
http://www.timara.oberlin.edu/GaryLeeNelson

#122141
Feb 9, 2008 at 4:05pm

Quote: Gary Lee Nelson wrote on Sat, 09 February 2008 08:42
—————————————————-
> The picture shows both a USB and a DC connector. There isn’t much
> description. How is this wireless?

hello, I haven’t got more info, it’s easy to copy the name, paste it in google, and then you will have all info available all over the world!.

#122142
Feb 9, 2008 at 4:06pm

> > Is there a solution for wireless transmitting of data generated by
> sensors?

Bluetooth i-cubex
iMote (MIT)

#122143
Feb 9, 2008 at 4:26pm

#122144
Feb 9, 2008 at 4:32pm

#122145
Feb 9, 2008 at 5:04pm

I’ve done this using a bluetooth CUI made by Dan Overholt.

They used to cost $200 though the price isn’t marked on the site. He also gives instructions for making your own.

More information here: http://www.create.ucsb.edu/~dano/CUI/

Near the bottom of the page for the bluetooth bit.

An even lower budget solution would be to hack a wireless game pad or a wiiremote, depending on how many inputs you need.

Pete

#122146
Feb 9, 2008 at 6:02pm

I used the Infusion Systems WiMicroDig in a theatre production. One
of the drawbacks I found with using BlueTooth is that it needed to be
manually reset whenever an actor wearing the transmitter moved out of
range (to dressing room). Kind of tough to have an engineer reaching
to reset that system while trying to mix.

Just an FYI.

On Feb 9, 2008, at 9:26 AM, gamuso wrote:

>
> hello… I was interested in this thing, investigate a little, and
> found some good options, here you have the links:
>
> for midi wireless, the best:
> http://www.musik-service.de/-prx395759292es.aspx
>
>
> in think this bluetooth based best:
> http://infusionsystems.com/catalog/product_info.php/products_id/98
>
>
> –
> http://www.davidfernandez.com.es
> —————————
> PB 15″ 1,67 Ghz. 1,5 G RAM.
> Lacie 250 Gb.
> Presonus FireBox
> Ableton Live 6
>

#122147
Feb 9, 2008 at 8:05pm

MidiTron Wireless (http://miditron.com) is designed to address many
of the problems I’ve seen in this thread:
- No Bluetooth, no resetting
- Much larger range than any Bluetooth solution
- Transmitter is a single, small unit so no need to use a sensor box
plus a wireless MIDI unit
- Minimal hacking – all you need to do is wire up or by pre-wired
sensors. Extensive instructions on wiring sensors can be found here:

http://eroktronix.com/wireless_manual.pdf

Plus, I’m always here to answer your questions :-)

Eric

At 12:02 PM -0600 2/9/08, Cecil Averett wrote:
>I used the Infusion Systems WiMicroDig in a theatre production. One
>of the drawbacks I found with using BlueTooth is that it needed to
>be manually reset whenever an actor wearing the transmitter moved
>out of range (to dressing room). Kind of tough to have an engineer
>reaching to reset that system while trying to mix.
>
>Just an FYI.
>
>
>On Feb 9, 2008, at 9:26 AM, gamuso wrote:
>
>>
>>hello… I was interested in this thing, investigate a little, and
>>found some good options, here you have the links:
>>
>>for midi wireless, the best:
>>http://www.musik-service.de/-prx395759292es.aspx
>>
>>
>>in think this bluetooth based best:
>>http://infusionsystems.com/catalog/product_info.php/products_id/98
>>
>>
>>–
>>http://www.davidfernandez.com.es
>>—————————
>>PB 15″ 1,67 Ghz. 1,5 G RAM.
>>Lacie 250 Gb.
>>Presonus FireBox
>>Ableton Live 6
>>
>

********************************************
* MidiTron *
* The MIDI to Real World Interface *
* *
* MidiTron Wireless *
* The Wireless Sensor to MIDI Interface *
* *
* Now available from http://miditron.com *
********************************************

#122148
Feb 10, 2008 at 12:59pm

A tutor of mine used a radio mic to send his controller data, not sure
exactly how he went about it though.

On 09/02/2008, Eric Singer

wrote:
>
> MidiTron Wireless (http://miditron.com) is designed to address many
> of the problems I’ve seen in this thread:
> – No Bluetooth, no resetting
> – Much larger range than any Bluetooth solution
> – Transmitter is a single, small unit so no need to use a sensor box
> plus a wireless MIDI unit
> – Minimal hacking – all you need to do is wire up or by pre-wired
> sensors. Extensive instructions on wiring sensors can be found here:
> http://eroktronix.com/wireless_manual.pdf
>
> Plus, I’m always here to answer your questions :-)
>
> Eric
>
> At 12:02 PM -0600 2/9/08, Cecil Averett wrote:
> >I used the Infusion Systems WiMicroDig in a theatre production. One
> >of the drawbacks I found with using BlueTooth is that it needed to
> >be manually reset whenever an actor wearing the transmitter moved
> >out of range (to dressing room). Kind of tough to have an engineer
> >reaching to reset that system while trying to mix.
> >
> >Just an FYI.
> >
> >
> >On Feb 9, 2008, at 9:26 AM, gamuso wrote:
> >
> >>
> >>hello… I was interested in this thing, investigate a little, and
> >>found some good options, here you have the links:
> >>
> >>for midi wireless, the best:
> >>http://www.musik-service.de/-prx395759292es.aspx
> >>
> >>
> >>in think this bluetooth based best:
> >>http://infusionsystems.com/catalog/product_info.php/products_id/98
> >>
> >>
> >>–
> >>http://www.davidfernandez.com.es
> >>—————————
> >>PB 15″ 1,67 Ghz. 1,5 G RAM.
> >>Lacie 250 Gb.
> >>Presonus FireBox
> >>Ableton Live 6
> >>
> >
>
>
> –
>
> ********************************************
> * MidiTron *
> * The MIDI to Real World Interface *
> * *
> * MidiTron Wireless *
> * The Wireless Sensor to MIDI Interface *
> * *
> * Now available from http://miditron.com *
> ********************************************
>

#122149

You must be logged in to reply to this topic.