i@seanstevens.com

Hi, I want to be able to record a MIDI stream (all channels), including the MIDI clock accurately. It doesn't necessarily need to be saved as a MIDI file, as I'll be parsing it with Max later...

But I do want it to be correct in relation to the clock etc.

Any example patches would be great, as this is part of my project but not the interesting part ;)

A tutorial # would be a fine response too :)

simplest-way-to-record-midi-including-clock-etc

You might take a read through Tutorials #35 & 36 in the Max TutorialsAndTopics file? Also, look at the section "Sequencing: Recording and Playing Back MIDI Performances" in the TutorialsAndTopics file. That might have what your looking for.

You might want to look at the help for the [seq] and [mtr] objects.

Sean,
You might take a read through Tutorials #35 & 36 in the Max TutorialsAndTopics file?  Also, look at the section "Sequencing: Recording and Playing Back MIDI Performances" in the TutorialsAndTopics file.  That might have what your looking for.

You might want to look at the help for the [seq] and [mtr] objects. 

> A tutorial # would be a fine response too :)

The seq~ help file and subpatcher MIDI...

Sean Stevens wrote:
> A tutorial # would be a fine response too :)

-- 
Stefan Tiedje------------x-------
--_____-----------|--------------
--(_|_ ----|-----|-----()-------
-- _|_)----|-----()--------------
----------()--------www.ccmix.com


I'm getting the following error message when I try to load MAX/MSP 4.6 on my Intel Mac:

To run this software, your clock must be set to 08:22:44 on 11/15/39 or later.

Select "Cancel" to correct your clock and try again.

Select "OK" to run this software with your current clock up to 3 more times.

If anyone has had this problem or can shed any light on this that would be great.

To view the terms under which this email is distributed, please go to 

http://disclaimer.leedsmet.ac.uk/email.htm

To view the terms under which this email is distributed, please go to http://disclaimer.leedsmet.ac.uk/email.htm


> To run this software, your clock must be set to 08:22:44 on 11/15/39

> Select "Cancel" to correct your clock and try again.

You didn't tell us if you corrected your clock or not.

Sometimes error messages do mean what they say...

Halsall, Benjamin wrote:
> To run this software, your clock must be set to 08:22:44 on 11/15/39
> or later.
>
> Select "Cancel" to correct your clock and try again.

You didn't tell us if you corrected your clock or not.
Sometimes error messages do mean what they say...

I've checked and re-set my clock. It is getting the time automatically from euro.apple.com.

From: maxmsp-bounces@cycling74.com on behalf of Stefan Tiedje

Subject: Re: [maxmsp] License Period Problem

-----Original Message-----
From: maxmsp-bounces@cycling74.com on behalf of Stefan Tiedje
Sent: Mon 8/14/2006 5:19 PM
Subject: Re: [maxmsp] License Period Problem

-- 
Stefan Tiedje------------x-------
--_____-----------|--------------
--(_|_ ----|-----|-----()-------
-- _|_)----|-----()--------------
----------()--------www.ccmix.com

I have the same problem while trying to load 4.5.7, (I mainly use 4.6). Recently, I was using Max in Demo mode and I was able to switch from one to another... No that I bought it, it seems that I can only use the most recent version...

I have the same problem while trying to load 4.5.7, (I mainly use 4.6). Recently, I was using Max in Demo mode and I was able to switch from one to another... No that I bought it, it seems that I can only use the most recent version...
Does anyone know what should I do?


simplest way to record MIDI, including clock etc