Forums > MaxMSP

temperature sensor MIN MAX

July 4, 2010 | 7:38 pm

Hi, I’m actually new with MAX, Thursday I’m takeing an examination in design interaction.(basic level)
I’m tryng to write a patch that use the temperature sensor stream(not very stable, first problem). I should register the low value and the highest value of the sensor inside a scale/zmap to calibrate the range, closing after that step the calibration and starting the interaction. Please, could anyone help me?? I cannot really do it by myself anymore..
Thanks a lot,
cristina

Attachments:
  1. calore.maxpat

July 4, 2010 | 8:48 pm

Hi Cristina.

At a quick look, your patch seems to go in the right direction, but knowing some more max objects would help – moreover, not everyone in the forum can understand comments and names in Italian ;)

the peak and trough objects give you the minimum and maximum from a stream of data. So, here is more or less what you need for your calibration thing:

– Pasted Max Patch, click to expand. –

… about your incoming data, there are many filtering techniques you can apply, but you should be more precise about the kind of unstability you’re experiencing – it would make easier to help you!

good luck
aa


July 5, 2010 | 11:26 am

this thread has an excellent example patch with multiple data-smoothing options. worth a look for the smoothing as well as learning some more Max trickery:

http://www.cycling74.com/forums/topic.php?id=18648#post-98729


Viewing 3 posts - 1 through 3 (of 3 total)