svc91

Horrible title, I'm sorry! And I'm also sorry for the really noob question I'm about to ask, haven't programmed in over a year and am struggling to get going on this!

So I'm going to be using a wiimote to pan sound sounds (with nunchuk joystick also).

I want to be able to select the sound to be triggered by scrolling left or right, which will then count up or down a list which will then select the sound that will be played.

Could someone give me some pointers on where to start? I literally can't even work out how to count up and down with left and right at the moment... I used to be good at this!

So I'm going to be using a wiimote to pan sound sounds (with nunchuk joystick also). 

triggering-soundfiles-by-scrolling-through-list

So I have the counting up and down (thank god, that's far too easy to be getting stuck on). Best way to trigger sounds depending on the number?

There are a few ways of doing it. Have you looked at all the sample playback tutorials?

Yup. I'm just having a play with groove~ but haven't got any sound yet. Also, when I select the sound through a list, I don't want it to be triggered, I want it to be held until A or B is pressed on the wiimote. B triggering a loop.

This is what I've got at the moment, which is a good start. But the problem is, if I scroll through the different sounds, they replace the sound in groove, however if I trigger a sound in groove to loop i want it to continue looping whilst I can trigger different sounds on top of it.

            "box" :             {

                "maxclass" : "newobj",

                "text" : "route 1",

                "outlettype" : [ "", "" ],

                "numoutlets" : 2,

                "patching_rect" : [ 687.5, 988.0, 48.0, 20.0 ],

                "fontsize" : 12.0,

                "id" : "obj-229",

                "fontname" : "Arial",

                "numinlets" : 2

                "maxclass" : "message",

                "text" : "0",

                "outlettype" : [ "" ],

                "numoutlets" : 1,

                "patching_rect" : [ 687.5, 1017.0, 32.5, 18.0 ],

                "id" : "obj-230",

                "maxclass" : "toggle",

                "outlettype" : [ "int" ],

                "patching_rect" : [ 639.0, 953.0, 20.0, 20.0 ],

                "id" : "obj-231",

                "parameter_enable" : 0,

                "numinlets" : 1

                "text" : "r B",

                "patching_rect" : [ 639.0, 933.0, 26.0, 20.0 ],

                "id" : "obj-228",

                "numinlets" : 0

                "patching_rect" : [ 584.0, 988.0, 48.0, 20.0 ],

                "id" : "obj-225",

                "patching_rect" : [ 584.0, 1017.0, 32.5, 18.0 ],

                "id" : "obj-224",

                "maxclass" : "number~",

                "outlettype" : [ "signal", "float" ],

                "patching_rect" : [ 414.75, 1159.0, 56.0, 20.0 ],

                "sig" : 0.0,

                "id" : "obj-222",

                "mode" : 2,

                "maxclass" : "comment",

                "text" : "reverse at normal speed",

                "numoutlets" : 0,

                "patching_rect" : [ 803.892883, 994.0, 151.0, 21.0 ],

                "fontsize" : 13.0,

                "id" : "obj-212",

                "textcolor" : [ 0.501961, 0.501961, 0.501961, 1.0 ],

                "frgb" : 0.0,

                "text" : "-1",

                "patching_rect" : [ 767.892883, 995.0, 32.5, 19.0 ],

                "id" : "obj-213",

                "text" : "forward at normal speed",

                "patching_rect" : [ 803.892883, 967.0, 151.0, 21.0 ],

                "id" : "obj-214",

                "text" : "1",

                "patching_rect" : [ 767.892883, 968.0, 32.5, 19.0 ],

                "id" : "obj-215",

                "text" : "stop",

                "patching_rect" : [ 800.392883, 1025.5, 35.0, 21.0 ],

                "id" : "obj-216",

                "patching_rect" : [ 767.892883, 1026.5, 32.5, 19.0 ],

                "id" : "obj-217",

                "text" : "sig~",

                "outlettype" : [ "signal" ],

                "patching_rect" : [ 708.5, 1055.0, 35.0, 21.0 ],

                "id" : "obj-218",

                "text" : "loop 1",

                "patching_rect" : [ 639.0, 1017.0, 46.0, 19.0 ],

                "id" : "obj-24",

                "text" : "loop 0",

                "patching_rect" : [ 541.75, 1017.0, 43.0, 18.0 ],

                "id" : "obj-211",

                "text" : "groove~",

                "outlettype" : [ "signal", "signal" ],

                "patching_rect" : [ 354.0, 1132.0, 54.0, 20.0 ],

                "id" : "obj-209",

                "numinlets" : 3

                "patching_rect" : [ 541.75, 953.0, 20.0, 20.0 ],

                "id" : "obj-208",

                "text" : "r A",

                "patching_rect" : [ 541.75, 933.0, 25.0, 20.0 ],

                "id" : "obj-202",

                "text" : "read",

                "patching_rect" : [ 656.0, 1281.0, 35.0, 18.0 ],

                "id" : "obj-195",

                "text" : "buffer~ s3",

                "outlettype" : [ "float", "bang" ],

                "patching_rect" : [ 694.0, 1315.0, 64.0, 20.0 ],

                "id" : "obj-196",

                "patching_rect" : [ 656.0, 1221.0, 35.0, 18.0 ],

                "id" : "obj-197",

                "text" : "buffer~ s2",

                "patching_rect" : [ 694.0, 1255.0, 64.0, 20.0 ],

                "id" : "obj-198",

                "text" : "set s3",

                "patching_rect" : [ 442.5, 1017.0, 43.0, 18.0 ],

                "id" : "obj-193",

                "text" : "set s2",

                "patching_rect" : [ 389.5, 1017.0, 43.0, 18.0 ],

                "id" : "obj-194",

                "text" : "set s1",

                "patching_rect" : [ 331.0, 1017.0, 43.0, 18.0 ],

                "id" : "obj-192",

                "text" : "set s0",

                "patching_rect" : [ 273.5, 1017.0, 43.0, 18.0 ],

                "id" : "obj-190",

                "patching_rect" : [ 656.0, 1176.0, 35.0, 18.0 ],

                "id" : "obj-186",

                "text" : "buffer~ s1",

                "patching_rect" : [ 694.0, 1210.0, 64.0, 20.0 ],

                "id" : "obj-187",

                "patching_rect" : [ 656.0, 1116.0, 35.0, 18.0 ],

                "id" : "obj-183",

                "text" : "buffer~ s0",

                "patching_rect" : [ 694.0, 1150.0, 64.0, 20.0 ],

                "id" : "obj-180",

                "text" : "r sound",

                "patching_rect" : [ 346.25, 917.0, 51.0, 20.0 ],

                "id" : "obj-136",

                "maxclass" : "button",

                "outlettype" : [ "bang" ],

                "patching_rect" : [ 442.5, 988.0, 20.0, 20.0 ],

                "id" : "obj-129",

                "text" : "select 3",

                "outlettype" : [ "bang", "" ],

                "patching_rect" : [ 442.5, 960.0, 52.0, 20.0 ],

                "id" : "obj-135",

                "patching_rect" : [ 389.5, 988.0, 20.0, 20.0 ],

                "id" : "obj-100",

                "text" : "select 2",

                "patching_rect" : [ 389.5, 960.0, 52.0, 20.0 ],

                "id" : "obj-102",

                "patching_rect" : [ 331.0, 988.0, 20.0, 20.0 ],

                "id" : "obj-85",

                "text" : "select 1",

                "patching_rect" : [ 331.0, 960.0, 52.0, 20.0 ],

                "id" : "obj-86",

                "patching_rect" : [ 279.5, 1288.0, 33.0, 18.0 ],

                "id" : "obj-75",

                "text" : "startwindow",

                "patching_rect" : [ 279.5, 1255.0, 74.0, 18.0 ],

                "id" : "obj-81",

                "text" : "line~",

                "outlettype" : [ "signal", "bang" ],

                "patching_rect" : [ 489.25, 1210.0, 36.0, 20.0 ],

                "id" : "obj-64",

                "text" : "$1 30",

                "patching_rect" : [ 489.25, 1178.0, 41.0, 18.0 ],

                "id" : "obj-65",

                "text" : "dac~",

                "patching_rect" : [ 360.25, 1328.0, 37.0, 20.0 ],

                "id" : "obj-66",

                "maxclass" : "flonum",

                "minimum" : 0.0,

                "patching_rect" : [ 489.25, 1142.0, 54.0, 20.0 ],

                "id" : "obj-67",

                "maximum" : 1.0,

                "text" : "*~",

                "patching_rect" : [ 386.25, 1236.0, 32.5, 20.0 ],

                "id" : "obj-71",

                "patching_rect" : [ 273.5, 988.0, 20.0, 20.0 ],

                "id" : "obj-90",

                "text" : "select 0",

                "patching_rect" : [ 273.5, 960.0, 52.0, 20.0 ],

                "id" : "obj-103",

            "patchline" :             {

                "source" : [ "obj-230", 0 ],

                "destination" : [ "obj-209", 0 ],

                "hidden" : 0,

                "disabled" : 0

                "source" : [ "obj-208", 0 ],

                "destination" : [ "obj-211", 0 ],

                "source" : [ "obj-231", 0 ],

                "destination" : [ "obj-24", 0 ],

                "source" : [ "obj-228", 0 ],

                "destination" : [ "obj-231", 0 ],

                "destination" : [ "obj-229", 0 ],

                "source" : [ "obj-229", 0 ],

                "destination" : [ "obj-230", 0 ],

                "source" : [ "obj-225", 0 ],

                "destination" : [ "obj-224", 0 ],

                "destination" : [ "obj-225", 0 ],

                "source" : [ "obj-224", 0 ],

                "source" : [ "obj-209", 1 ],

                "destination" : [ "obj-222", 0 ],

                "source" : [ "obj-218", 0 ],

                "source" : [ "obj-213", 0 ],

                "destination" : [ "obj-218", 0 ],

                "source" : [ "obj-215", 0 ],

                "source" : [ "obj-217", 0 ],

                "source" : [ "obj-209", 0 ],

Triggering soundfiles by scrolling through list