Namespaces

Variants
Actions

BEAP Analog Model Curriculum Outline

From Cycling '74 Wiki
(Difference between revisions)
Jump to: navigation, search
(Introduction)
Line 25: Line 25:
 
== Oscillators and Tone Generation ==
 
== Oscillators and Tone Generation ==
  
 +
* Oscillators are the way that synths make sound. They create repeated waveshapes at a set frequency.
 +
** Select an Oscillator from the contextual menu (ctrl/right-click, then Paste From | BEAP | Oscillators | Oscillator).
 +
** An oscillator by itself creates waveforms, but is not routed to our computer's output. For this, we need an Output Module.
 +
** Select a stereo output from the contextual menu: Paste From | BEAP | Output | Stereo
 +
** Connect the output of the oscillator to both inputs of the Stereo module.
 +
** Turn on the DSP (this might need explaining), and you should hear a tone.
 +
 +
* The two most important setting of the oscillator are the tuning and the waveshape.
 +
** Change the tuning by adjusting the offset knob on the front of the Oscillator module.
 +
** Change the waveform by selecting a waveform image in the button matrix.
 +
** Note how the waveform changes the timbre, but not the pitch, of the oscillator.
 +
 +
* More than one oscillator can be used at a time to create more interesting tonality.
 +
** Select another Oscillator from the menu, or copy the existing one by option/alt-dragging the one already on-screen.
 +
** Select the patchcord going to the right inlet of the Stereo module, then grab the top handle and drag it from the first to the second oscillator.
 +
** Now you will hear an oscillator in each ear of your headphones. Adjust the offset and waveform in each to verify the changes.
  
 
== Level Control/Gating with a VCA ==
 
== Level Control/Gating with a VCA ==

Revision as of 04:10, 20 June 2013

Contents

Introduction

  • What is the Analog Model?
    • Based on modular synthesis techniques.
    • Focuses on subtractive synthesis.
    • Built off of four primary tools:
      • Oscillators
      • Filters
      • Level Controls
      • Modulators


  • Why is this Important?
    • It is the basis for most modular synth techniques.
    • It is also the basis for a lot of synth-based music.
    • It provides a useful way to do sound design iteratively.
    • It sounds good, too!


  • What is necessary for this workshop?
    • A laptop with audio capability.
    • A pair of headphones.

Oscillators and Tone Generation

  • Oscillators are the way that synths make sound. They create repeated waveshapes at a set frequency.
    • Select an Oscillator from the contextual menu (ctrl/right-click, then Paste From | BEAP | Oscillators | Oscillator).
    • An oscillator by itself creates waveforms, but is not routed to our computer's output. For this, we need an Output Module.
    • Select a stereo output from the contextual menu: Paste From | BEAP | Output | Stereo
    • Connect the output of the oscillator to both inputs of the Stereo module.
    • Turn on the DSP (this might need explaining), and you should hear a tone.
  • The two most important setting of the oscillator are the tuning and the waveshape.
    • Change the tuning by adjusting the offset knob on the front of the Oscillator module.
    • Change the waveform by selecting a waveform image in the button matrix.
    • Note how the waveform changes the timbre, but not the pitch, of the oscillator.
  • More than one oscillator can be used at a time to create more interesting tonality.
    • Select another Oscillator from the menu, or copy the existing one by option/alt-dragging the one already on-screen.
    • Select the patchcord going to the right inlet of the Stereo module, then grab the top handle and drag it from the first to the second oscillator.
    • Now you will hear an oscillator in each ear of your headphones. Adjust the offset and waveform in each to verify the changes.

Level Control/Gating with a VCA

Filtering with an LPF

Modulating with Envelopes and LFO's

Improving the Sound with Effects

Creating Material with Sequencing

Recording your Output

Conclusion

Based on a workshop given at the Currents New Media Festival in 2013 by Darwin Grosse