Namespaces

Variants
Actions

ReWire and Reason

From Cycling '74 Wiki
(Difference between revisions)
Jump to: navigation, search
Line 42: Line 42:
 
== Sequencing in Max, Playing in Reason ==
 
== Sequencing in Max, Playing in Reason ==
  
 +
The next step is to create some way to do an interesting sequencing system in Max. Let's start by making a simple drum matrix sequencer that is run off the transport:
 +
 +
[[File:MaxReason-Connection-2-2a.gif]]
 +
 +
In this case, we have a transport-based timing system that uses a counter to output a step position. This goes into a live.grid object (set to matrix mode), then the output is split apart and sent to our input keys. These keys are used to send the MIDI messages from the previous patch to the Kong drum machine. This creates a basic grid-style drum sequencer that can play back Kong without having to mess around with pad programming.
 +
 +
But why program the grid at all. By watching for the first step of the sequence and randomizing the grid, we can have Max do the hard work for us! In this updated patch, I have a compound message that is activated whenever the first step is seen:
 +
 +
[[File:MaxReason-Connection-2-2b.gif]]
 +
 +
At that first step, the message will clear and randomly place one note in each column. But I also want a four-on-the-floor kick drum, so I'm using the setcell message to force the kick to fire on every downbeat. While this is really simple generative stuff, it also is surprisingly good-sounding. In fact, some of the patterns are so good that I don't want an immediate change to the next pattern, so I placed a switch at the output of the generator to allow me to "hold" a pattern until I'm sick of it.
  
 
== Adding a Second Instrument ==
 
== Adding a Second Instrument ==

Revision as of 18:14, 9 November 2012

Contents


Overview Material

Using Max with Reason

In the ReWire Essentials tutorials (linked above), we used Max as both a mixer (hosting application) and "device" (controlled application). These are the two sides of the ReWire connectivity equation, and Max can work equally in both modes. In order to dive into ReWire at a deeper level, let's look at a connection to one of the most-used ReWire packages there is: Propellerheads Reason.

In order to have the most fun with our Max/Reason combination, we are going to do some sequencing and audio processing in Max, and use Reason as a synth/sampling and mixing device. What we *won't* do is run the Reason sequencer or use its recording capabilities. In this way, we'll get to do goofy and interesting Max sequencing and processing (something Max is really good at...), and let Reason handle the synthesis (something Reason is damned good at).

Let's start by creating a very basic connection between Max and Reason. Here's the patch that I created:

MaxReason-Connection-1-basic.gif

Unlike what you see in most of the ReWire help files, I'm using the rewire~ object with a named device. This allows me to state explicitly that this is a connection to Reason, and I don't have to mess around with application selection or other confusing UI elements. I connect the outputs of the rewire~ object to an audio chain (live.gain and ezdac~), and I create two message for the input: "openpanel" and "closepanel".

Different ReWire clients work differently, and even the same application not work the same on Windows vs. Mac. In my case (Max OS X, Reason 6.5), clicking on the "openpanel" message will actually launch the Reason application in ReWire client mode, and will be completely active with no other interaction. If I create a Reason instrument (Kong, in this case), I can play that instrument and receive the audio within my Max patch.


MaxReason-Connection-1-all.gif


Send MIDI Messages to Reason

The next thing we want to do is to fire notes into the Kong instrument using MIDI messages from Max. To do this, we have to send a specially formatted message into the rewire~ object. The format of the message is:

midi <timestamp> <bus number> <MIDI message> <note value> <velocity value>

Since we don't care about sequence timing or routing, our timestamp and bus number are always 0. Since we are sending notes, our MIDI message is always 144. The note number and velocity information is created by a makenote object, which will take our incoming note information and turn in to MIDI note pairs (noteon and noteoff messages).

The basic note-playing patch will look something like this:


MaxReason-Connection-2-1.gif


Sequencing in Max, Playing in Reason

The next step is to create some way to do an interesting sequencing system in Max. Let's start by making a simple drum matrix sequencer that is run off the transport:

MaxReason-Connection-2-2a.gif

In this case, we have a transport-based timing system that uses a counter to output a step position. This goes into a live.grid object (set to matrix mode), then the output is split apart and sent to our input keys. These keys are used to send the MIDI messages from the previous patch to the Kong drum machine. This creates a basic grid-style drum sequencer that can play back Kong without having to mess around with pad programming.

But why program the grid at all. By watching for the first step of the sequence and randomizing the grid, we can have Max do the hard work for us! In this updated patch, I have a compound message that is activated whenever the first step is seen:

MaxReason-Connection-2-2b.gif

At that first step, the message will clear and randomly place one note in each column. But I also want a four-on-the-floor kick drum, so I'm using the setcell message to force the kick to fire on every downbeat. While this is really simple generative stuff, it also is surprisingly good-sounding. In fact, some of the patterns are so good that I don't want an immediate change to the next pattern, so I placed a switch at the output of the generator to allow me to "hold" a pattern until I'm sick of it.

Adding a Second Instrument

Adding a Second Sequencer

Modulation of Reason Parameters

Wrapping it Up