benjamin vyger

I manage to send data from Processing to Arduino. I manage to send data from Arduino to Max.

Datas from Processing are exactly send at good places in Max. At the beginning nevertheless.

A few second after, I read theses bugs in a Max console.

In this exemple when I stopped Processing, you can see datas match with Max. It is lucky

In this exemple when I stopped Processing, you can see datas don't match with Max.

There is an overflow in the reception of data which should all happen in their channel A, B, C, D, E. The data arrives randomly in A, B, C, D, while if I send data from Arduino to Max, it arrives in the right channel.

Here my fonction in Arduino to receive datas from Processing and sending datas to Max.

void SendDataToMax () {
// Arduino--Max--Processing  
/*
    for(uint8_t i = 0; i < NBMOTEURS; i++) { 
  // WORK VERY WEELL. 
  /*
      Serial.print ("A "); Serial.println (i);     
      Serial.print ("B "); Serial.println (-i+2);        
      Serial.print ("C "); Serial.println (i+3);  
      Serial.print ("D "); Serial.println (i+4);
      Serial.print ("E "); Serial.println (i*4);
*/
/*
//  WORK VERY WEELL. 

 w4=i; w3=i+2; w2=i+3; w1=i+4;  w0=i+5;
      Serial.print ("A "); Serial.println (w0);     
      Serial.print ("B "); Serial.println (-w1);        
      Serial.print ("C "); Serial.println (w2);  
      Serial.print ("D "); Serial.println (w3);
      Serial.print ("E "); Serial.println (w4);
     Serial.println (i-2);
 */  
 
     
    if (Serial.available() > 0) { // Port serie envoie des donnés
   w0 = Serial.parseInt(); // 
    w1 = Serial.parseInt(); 
    w2 = Serial.parseInt();
    w3 = Serial.parseInt();
    w4 = Serial.parseInt(); // La dernière donné qui figure sur le serial de Processing arrive en premier sur Arduino
    
Serial.read();    
 
 
      Serial.print ("A "); Serial.println (w0);     
      Serial.print ("B "); Serial.println (w1);        
      Serial.print ("C "); Serial.println (w2);  
      Serial.print ("D "); Serial.println (w3);
      Serial.print ("E "); Serial.println (w4);
      
    int i = random (1, 5);
       Serial.println (i);
       
 // delay(10);}
 //  }
 
} 


There is an overflow in the reception of data which should all happen in their channel A, B, C, D, E.  The data arrives randomly in A, B, C, D, while if I send data from Arduino to Max, it arrives in the right channel.

Hello,
I manage to send data from Processing to Arduino. I manage to send data from Arduino to Max.
Datas from Processing are exactly send a

Data from Processing to Arduino to Max. Bug communication from Processing to Max.