How can audio inputs be changed live?


    Jun 16 2008 | 5:07 pm
    I want to be able to control what soundcard channel audio comes into my patch from, inside the patch. I thought this would work, using adstatus outputs and set messages:
    However, that only works if I do the following steps:
    Enable dac~
    Select inputs
    Disable dac~
    Enable dac~
    After doing those steps once the dac~ no longer has to be switched on and off, but it seems like there should be a simple way without ever disabling the dac~.

    • Jun 16 2008 | 5:38 pm
      you could just route it after the [adc~]
    • Jun 16 2008 | 6:36 pm
      here you go:
      On Mon, Jun 16, 2008 at 6:38 PM, don malone wrote:
      >
      > you could just route it after the [adc~]
      > --
      > it takes all of us
      > LoneMonad
      > http://faculty.roosevelt.edu/malone/default.htm
      >
    • Jun 16 2008 | 6:59 pm
      oh yeah in the example I gave you might get clicks so you might want
      to use the routing option or some sort of de-clicker
      On Mon, Jun 16, 2008 at 7:36 PM, carey dodge wrote:
      > here you go:
      >
      >
      >
      >
      > On Mon, Jun 16, 2008 at 6:38 PM, don malone wrote:
      >>
      >> you could just route it after the [adc~]
      >> --
      >> it takes all of us
      >> LoneMonad
      >> http://faculty.roosevelt.edu/malone/default.htm
      >>
      >
    • Jun 16 2008 | 7:42 pm
      That patch has the same problem as my patch: I have to turn off audio and then turn it back on or else it doesn't work.
    • Jun 16 2008 | 9:57 pm
      really? I have used it in many patches and it works fine. huh?
      Go with the route option then:
      or if you want to get fancy you can look into poly~
      On Mon, Jun 16, 2008 at 8:42 PM, Aaron Faulstich wrote:
      >
      > That patch has the same problem as my patch: I have to turn off audio and then turn it back on or else it doesn't work.
      >
      >
    • Jun 16 2008 | 11:58 pm
      I did "new from clipboard" with your patch (the first one), then:
      enabled adc~
      changed the number box to 3
      On my system that doesn't do anything unless I then:
      disable adc~
      enable adc~
      Then it works. Does the patch I posted work on your system?
    • Jun 18 2008 | 8:02 am
      Aaron Faulstich schrieb:
      > I want to be able to control what soundcard channel audio comes into my patch from, inside the patch. I thought this would work, using adstatus outputs and set messages:
      You could copy the I/O subpatcher from the DSP status patch, or just use
      the DSP status...
      --
      Stefan Tiedje------------x-------
      --_____-----------|--------------
      --(_|_ ----|-----|-----()-------
      -- _|_)----|-----()--------------
      ----------()--------www.ccmix.com