Fabrizio Poce

http://www.maxforlive.com/library/device.php?id=1003

A StepSequencer with features for analog-like / old-school sequencing and LFO/API modulation.

It is build on top of Live's standard StepSequencer, with the following features:

# Tab selection for All, Note, Velocity, Duration, Freq and Res (top/left section)

- All, Note, Velocity, Duration are identical to Live's original StepSequencer. Click (or used pre-mapped controls) to change

- Freq and Res are for use of modulating other devices in live (require additional add-on modules "Step CC-Freq", "Step CC-Res" and/or "Step CC-Mod"

- "Step CC-Freq" chained after the StepSequencer gets the Freq value and through Live's API uses it to modulate a device/parameter of choice

- "Step CC-Res" chained after the StepSequencer gets the Res value and through Live's API uses it to modulate a device/parameter of choice

- "Step CC-Mod" chained after the StepSequencer gets a CC number and through Live's API uses it to modulate a device/parameter of choice. CC 18 is for Freq, CC 19 is for Res.

- "Step CC-Mod" can be used as standalone as well for any CC to modulate a device/parameter of choice.

- The step sequencer can be used as an LFO only using Freq/Res tabs.

# Scale/Chord based modifiers (top/center see "modf" label). This allows probabilistic variations in sequence according to a given scale (note in step 1 as the key).

- menu for frequency/amount of notes for choice ("never" set's the modifiers off)

# Input MIDI note to shift the entire sequence according to the input (arpeggiator-like)

- An input of, let's say, E0 (28) shifts the sequence of +4 notes

# Toggles for selecting layers (1-8, section immediately on the right of the sequence view).

- The additional toggle "add" allows more layers on top of each other

- Pre-mapped controls as specified below for quick launch

# Swing section (identical to Live's original StepSequencer)

- "thru" allows all CC's numbers to be sent through (out, recommended)

- "freq/res" allows the CC forAPI modulation of Freq/Res values (with "Step CC-Freq", "Step CC-Res" and/or "Step CC-Mod")

- Use the bar amove the seuquence to set points

- Pre-mapped controls as specified below for quick selection

# Arrows / R buttons (bottom) as from Live's original step sequencer

- Shift 1 step left / Shift value up / Shift value down / Shift 1 step right / Randomize value

# Import/Export of presets for sequences (right-most section)

- Copy/Paste for copying/pasting a sequence (inclusive of all parameters)

- Preset file is stored in live set with device

Note: to be able to use "pre-mapped" controls (like a NanoKontrol as I use with it) arm the track for recording.

transport-3 // transport-5 = mode select (All, Note, Vel, Dur, Freq, Res)

shift + transport-3 transport-5    = shift sequence left/right

shift + transport-4 = all step selected mode +10

shift + transport-2 = all step selected mode -10

# Mapping (reference to NanoKontrol(1), as I used)

Just copy the device somewhere and load it on a track

Use read/write for Import/Export of presets (right-most section)

Arm the track for recording to be able to use "pre-mapped" controls (like a NanoKontrol as I use with it)

StepSequencer J74
Download link:
http://www.maxforlive.com/library/device.php?id=1003

############################
A StepSequencer with features for analog-like / old-school sequencing and LFO/API modulation.
It is build on top of Live's standard StepSequencer, with the following features:

# Tab selection for All, Note, Velocity, Duration, Freq and Res (top/left section)
- All, Note, Velocity, Duration are identical to Live's original StepSequencer. Click (or used pre-mapped controls) to change
- Freq and Res are for use of modulating other devices in live (require additional add-on modules "Step CC-Freq", "Step CC-Res" and/or "Step CC-Mod"
- "Step CC-Freq" chained after the StepSequencer gets the Freq value and through Live's API uses it to modulate a device/parameter of choice
- "Step CC-Res" chained after the StepSequencer gets the Res value and through Live's API uses it to modulate a device/parameter of choice
- "Step CC-Mod" chained after the StepSequencer gets a CC number and through Live's API uses it to modulate a device/parameter of choice. CC 18 is for Freq, CC 19 is for Res.
- Pre-mapped controls as specified below
- "Step CC-Mod" can be used as standalone as well for any CC to modulate a device/parameter of choice.
- The step sequencer can be used as an LFO only using Freq/Res tabs.
# Scale/Chord based modifiers (top/center see "modf" label). This allows probabilistic variations in sequence according to a given scale (note in step 1 as the key).
- menu for type of scale
- menu for frequency/amount of notes for choice ("never" set's the modifiers off)
# Input MIDI note to shift the entire sequence according to the input (arpeggiator-like)
- The reference is a C0 (24)
- An input of, let's say, E0 (28) shifts the sequence of +4 notes
# Toggles for selecting layers (1-8, section immediately on the right of the sequence view).
- The additional toggle "add" allows more layers on top of each other
- Pre-mapped controls as specified below for quick launch
# Swing section (identical to Live's original StepSequencer)
- Swing off/on toggle
- Swing quantization
- Swing amount
# Functions button (apply to all steps)
- pitch up/down
- velocity up/down
- duration up/down
- Freq up/down
- Res up/down
- Previous/Next sequence (= layer)
- Zoom in/out (piano keyboard zoom)
- View up/down (piano keyboard up/down)
# Special Toggles
- "thru" allows all CC's numbers to be sent through (out, recommended)
- "freq/res" allows the CC forAPI modulation of Freq/Res values (with "Step CC-Freq", "Step CC-Res" and/or "Step CC-Mod")
# Loop point
- Use the bar amove the seuquence to set points
- Pre-mapped controls as specified below for quick selection
# Arrows / R buttons (bottom) as from Live's original step sequencer
- Shift 1 step left / Shift value up / Shift value down / Shift 1 step right / Randomize value
# Import/Export of presets for sequences (right-most section)
- Copy/Paste for copying/pasting a sequence (inclusive of all parameters)
- Reset to set all values to default
- Red Buttons for storing preset
- Green Buttons for recalling preset
- Read to import saved presets
- Write to export presents
- Clear to clear the bank
- Preset file is stored in live set with device
- Pre-mapped controls as specified below

################
# Pre-mapped Functions
transport-1 = shift

shift + transport-3 transport-5	= shift sequence left/right

shift + transport-4 = all step selected mode +10 

###############
# Mapping (reference to NanoKontrol(1), as I used)
CC	button/slider	Type
63	transport-1	momentary
64	transport-2	momentary
65	transport-3	momentary
66	transport-4	momentary
67	transport-5	momentary
85	transport-6	momentary
68	button 1-up	toggle
69	button 2-up	toggle
70	button 3-up	toggle
71	button 4-up	toggle
72	button 5-up	toggle
73	button 6-up	toggle
74	button 7-up	toggle
75	button 8-up	toggle
77	button 1-down	toggle
78	button 2-down	toggle
79	button 3-down	toggle
80	button 4-down	toggle
81	button 5-down	toggle
82	button 6-down	toggle
83	button 7-down	toggle
84	button 8-down	toggle
61	button 9-up	momentary
62	button 9-down	momentary
50	slider1	 1-127 value
51	slider2	 1-127 value
52	slider3	 1-127 value
53	slider4	 1-127 value
54	slider5	 1-127 value
55	slider6	 1-127 value
56	slider7	 1-127 value
57	slider8	 1-127 value
59	slider9	 1-127 value

############################
# Installation:
Just copy the device somewhere and load it on a track
Use read/write for Import/Export of presets (right-most section)
Arm the track for recording to be able to use "pre-mapped" controls (like a NanoKontrol as I use with it)

Cheers
Fabrizio
http://www.fabriziopoce.com/


stepsequencer-j74-for-analog-like-old-school-sequencing

Download Link was not right in the previous post.

http://www.maxforlive.com/library/device.php?id=1004

Download Link was not right in the previous post.
Here the right one:

http://www.maxforlive.com/library/device/2313/j74-stepsequencer64-groove-box

Device has been "reshaped" in time.
On maxforlive.com is here now:http://www.maxforlive.com/library/device/2313/j74-stepsequencer64-groove-box


StepSequencer J74 (for analog-like / old-school sequencing)