Define audio Output as a INPUT signal?
I’ve got a bit of an interesting question. I’ve tried searching, havent really come up with anything relevant.
I’ve compiled a Standalone app. Its Output is 1-2. My question is………. Is it possible to define this Output(1-2) as an INPUT signal?
So it would act just like if there would be a Bass-guitar or a Synth plugged in Physically into INPUT 1-2, or 3-4, etc,.?
I’ve tried [adstatus input 1], i’ve also put the whole Audio Staus inside the Standalone. Its not working. Im guessing these input defines are for Physical signals (like bass’es or synths) right? not for my type of scenario.
Is my question possible?
Thanks very much!
post your patch pls
You can send your audio to Soundflower and use Soundflower as an input in other software.
I forgot about Soundflower. But thats kind of a half-way solution.
Would it be possible to do this all within Max? I really dont want to use any other software. Was Soundflower built with Max?
@jamesson; There is nothing wrong or extra ordinary with the patch. [buffer~] ->> [groove~] ->> [ezdac~] It Outputs 1-2, i want that Output to become an Input signal. (just like using soundflower would)
maybe you can simply route back your signal using selector~ and gate~ before going into ezdac~
----------begin_max5_patcher---------- 986.3ocyWssbaBCD8Y3qfQO61AIa7k9Ez+gLc7HCx1JEKw.Bmzjo4au5BnHY CwXhqaeHJlU21yY28HoWCC.a3OSp.QeK5gnffWCCBzlTFBZ9N.b.+bZNtROL .4EbV5afIlt30hbhP7qBhYM.UzcLbNXh8WQ+nYnEXQ5dJa25RRpvL5ownuFO IZ1JcaRaqcJr5CTlb806LrwHMS6G7MO9EHD79HMthdnHkweGFpZlLPbUefvp 6EVTlPgI8eV2aKmIpnunGCTgjFfVRpHLAVP4LGvBmMUAPjAywMM1EiJHGZBD .91spcZhpg7RFN09kfSYE0hOjUgyV3rQvX8VAWdM7ZLvAhL7AMDAemjejHno XfcyKk8IHkqIL7lb8nh6LhL8eZDoOtUykP+OQCgaWLZpc0+CLKi7jzWZ2KA4 YM5.RXRnGIQZdn+R7KW.zQktoFOQWiub9GSawmSaKGFs4SMvaG0HKnydyPLf qG7I5jloSWpycld0IMKFC5iGA50hMuA5GJn45T9oyPCQxFcNTle6b1dBUEQO sGKHGIkW5PpQjGiVszD8z+a9pqNTlLpDYWGRhKCmzPJxkhlqfak77FmQG.vE ENlCblhhIejqWn4SrlnLioXqoRxQZ67WZLJiOgsc1xJI5jhUyzbxL8GyV5b3 lLRtKmm9SRl6xC3EDlrjx43RutyHaw04h0cGc76eKNkz6j6klC.6JoYblxQ7 lsxb6VJE80o4vDW.oGACWzwjqjXotZCtTwcMZ2n1NEbdteW1vkLaGynGj4tB pwgQw1EkdnnTcjm6FYNZXeUZIOO2aoL8bridxjQzTxSzLwd8Z4RmxgSKZCC. KGkQ2QpD91D3cU9V7tHoaplaYrm8SJmM46sqWeRoPn9tMFkGjs0FX5qF7z5P DveBtZQN8jxOHuERC3aMq0oZpEFIX09mqKbIMpKPHPit7PHj3tIDX+DB7JHj 2qPxor9RHz3P0e2LUEutLskGZ7sHeDISVETlUy3AaP8jwsmlk4WdZxnqT0GY 1SdNCDgtRcfJ7QR1Z4NHo80XgnjtoVX.mqN7sPP5xhdWQUZmNxEbf91Xo.9F bdyIP142gfP36j4s4.8cREw2hPi3ImWw45ymapbz2TKA9wmq2w8ZPi4bczs7 Bp4RvvKG.Q8It1i4IrKtvydl1wKJ+r2eWuS9ZJF15TsjFN6bMDOQjdDPTiAZ GyYhGmKbbVvavtS7.bGO8r+ptypARN2GuY4.8FzcwaPdIEc6MKtabCZ.by76 VZ7P8l6C2jLvZp6TI9.7ljQxMF4vSdfmxQN4gcm7ntSePmb09c3e.Di1EzD -----------end_max5_patcher-----------
ore have more sofisticated routing through the matrix~ object
hmmm… Unfortunately no, it doesn’t seem to work.
I cant see how [matrix~] would be any different. I understand you can specify multiple Inputs/Outputs but thats not the type of Input i am talking about. Or am i missing something? :/
did you try adoutput~ ?
Are you asking if it’s possible to input audio into this buffer+groove combo?
It’s kind of difficult to parse what you’re saying, because you skip right to suggesting a sort of "solution", which we don’t understand. I think if you could write a little bit more about what you want to achieve, that’d be really helpful.
For instance, if it’s the above, then yes it’s absolutely possible.
No i dont think [adoutput~] is a goer. And no i dont want to record into a [buffer~]. Its as @Boris suggested; "send your audio to Soundflower and use Soundflower as an INPUT in other software." Except i dont want to use Soundflower, i want to imitate what Soundflower does inside Max.
My standalone app is outputting sound through Output1-2. Now, i open MASCHINE (logic or PT) i want to record that signal coming out of my standalone app. And in-order to record, i need to set an INPUT.
Now I understand. You can do this through Rewire. I don’t know if Pro Tools supports that, but Logic does.
Forums > MaxMSP