Enttec dmx usb pro with serial object not sending dmx messages! Please help Please!
Hello, I would like to control a DMX projector from max via an Enttec dmx usb pro, using the serial object. I already achieved this with a Macbookpro (2012) Os 10.14.6.
With a new Macbook M1pro, Os Somona 14.6.1, I observe that the green LED indicating the sending of DMX messages does not light up, so apparently no DMX message, yet the serialport of my Enttec is recognized. So, I have doubts about this configuration. Can anyone tell me if this is a compatibility issue?
Or what if I need to specially configure the serial object so that the data transmitted by the serial port is relayed by the Enttec to the projector (flashing green LED)?
Configuration:
Macbook M1pro
Somona 14.6.1
max 8.6.4
usbserial port-EN406708
Enttec dmx pro
My attached patch
Thank you in advance!
It's messy but this is my WIP patch for converting audio to a dmx signal. just select the serial port for your dmx interface. I have a midi version too if you want.
key object is fxwdmxusbpro which someone else post on this forum (i forgot who :()
Hello Virgile,
I made an external for the Enttec dmx usb pro: https://cycling74.com/forums/sharing-my-take-on-an-enttec-dmx-usb-pro-external
Maybe it can help ?
Jan
Hey there!
Thank you for your advices!
I'll check them next monday and I comme back to you
Virgile
Hi there!
Thank you very much!
@Weston, I won't use it because I need to control lights from gyroscopic datas, but it looks efficient!
@Jan M, your external is wonderfull! I did what I need : controling several auto with full options within range of 255 steps. I love it! For this, I developed max controlers imbeded in bpatchers.
I share it for you !
Thx for all!
Virgile
Hi Jan, i just downloaded you external, thank you for updating dmxusbpro! However I'm getting the error "jam.dmxusbpro: Error opening device", any idea how i can fix this? I did all the usual stuff, reboot...
Cheers!