Multiple USB Mac OSX Webcam

    Nov 06 2009 | 6:22 pm
    Can anyone recommend?
    1. A mac osx compatible webcam (reasonable quality) 2. How to connect multiple USB webcams to a mac with Jitter 3. How or if Max/Jitter will enable me to access all cameras simultaneously in realtime.
    I assume the jit.qtgrab object is the way forward here, but don't know how to get at least two working at once. Any help would be much appreciated.

    • Nov 09 2009 | 6:46 pm
      this person claims to have 3 working webcams with jitter.
      what have you tried?
    • Nov 09 2009 | 7:49 pm
      i think this issue has been discussed many times before on this forum. Hear is the link to the AndrewBenson tutorial ( ) that i recommend you to read.
    • Nov 09 2009 | 9:37 pm
      Hi. First of all I recommend you to use this Universal Driver for playing every existing webcam : It works seriously.
      Then, use the following patch and you should be able to see your two or three webcams as a devices in vdevice list by pushing "getvdevlist". It's pretty simple.
    • Nov 10 2009 | 4:49 pm
      Thanks chaps...
      very useful info. I had seen the video tutorial but it didn't really answer the specific question I had.
      I had already installed the Macam software, but it seems to work as a standalone application. I assume it's loaded in a bunch of drivers for generic use too? Also (eeeee.), how do I get that code you sent into Max?
      So,what if I wanted to connect a few of these using Vers 5 in Mac osx?
      If you hadn't guessed, I'm a newbie, so any help is good. cheers.
    • Nov 10 2009 | 5:33 pm
      omeniv wrote on Tue, 10 November 2009 09:49Also (eeeee.), how do I get that code you sent into Max?
      How to put that code into a Max patch? Simply you have to copy-paste it (from ----------begin_max5_patcher---------- to
      ----------end_max5_patcher-----------) into a new Max Patcher
      Quote:I had already installed the Macam software, but it seems to work as a standalone application. I assume it's loaded in a bunch of drivers for generic use too?
      Forget the standalone Macam. The most important thing to do is to replace the "macam.component" in /Library/QuickTime/ for using every cameras with other applications (like MaxMsp) .
      Dont forget an Usb Hub for plug in your several webcams.
    • Nov 15 2009 | 3:34 pm
      hello Robtherich
      I guess you are refering to my post.
      I used the Unibrain firewire cameras. haven't tried with usb
      I connected my cameras to a firewire hub. 2 of them were chained and plugged to the firewire hub the third one plugged to the hub
      One of the Unibrain advantage is that each cameras has 2 firewire ports so you can chain them easyly. You can also get b&w or color cameras. And there is a setting app for the color and gamma correction.
    • Nov 16 2009 | 11:53 am
      Hi thanks all,
      I have issues though.
      I have used the patcher you (eee.) suggested and although it always seems to work with and detect my iSight camera it won't recognise the two MS VX-3000 cameras.
      The set list in the patch doesn't ammend or allow input from anything but iSight.
      Even before this stage, having installed Macam and put the component part in the Quicktime library (as suggested) the only way the camera LED lights switch on (thus showing they are connected) is by first using them in the Macam program itself. Not what I'm after at all.
      So, is this a Snow Leopard thing? a Macam QT component issue? Is an MS webcam a no no with the above? Is the patcher an issue?
      Also, I'd love to know what's happening here in terms of how this process with external camera inputs works as I want to add/connect some non proprietry CMOS IR Cameras such as..
      The thinking is, if it's a hassle doing it this way with standard wecams how will it fair with other bits of kit on a Mac / OSX etc???
      Let me know, cheers
    • Nov 22 2009 | 2:33 pm
      Have you connected your cameras to a Usb Hub like eee is suggesting ?
      With several cam, I would guess it is the same then with firewire, you would need a self-powered hub. The computer by itself doesn't have enough electrical "juice" to power for that many cams at the same time.
    • Mar 18 2010 | 11:37 am
      Hi all,
      we are trying to connect 2 Macally cameras via a USB-HUB (powered by an adapter) to the computer, and import the 2 different cameras in Max/Jitter. jit.qt.grab detects three input possibilities, iSight, Macally Camera and Macally Camera #2. Still, it only manages to select one of the external cameras. When selecting the second one it does not respond, although it is able to work with iSight and 1 external camera through USB HUB. Any ideas?
    • Dec 13 2010 | 9:12 am
      to copy the code , plz follow the following steps:
      To copy this code into Max/MSP, copy (ctr+C) all the code that is in the gray box. In Max/MSP, go File >> New From Clipboard and it will paste the patch for you.
    • Dec 13 2010 | 4:08 pm
      Dude, that was a year ago and someone already told them how...