Forums > MaxMSP


Nov 23 2012 | 9:23 pm

Hello dear maxDmxier,
I just received my new little dmx box dmxusbproMK2 from enttec.
As far as i tried


dmxusbpro: opened device ‘/dev/cu.usbserial-ENVVBPXS’
dmxusbpro: found 1 devices:
dmxusbpro: /dev/cu.usbserial-ENVVBPXS
dmxusbpro: firmware version: 4.4
dmxusbpro: refresh rate: 40 Hz
dmxusbpro: break time: 96.03 us
dmxusbpro: mark after break: 10.67 us
dmxusbpro: serial number: 34743417


imp.dmx.usbpro: Connected to device /dev/tty.usbserial-ENVVBPXS
imp.dmx.usbpro: port a: tty.usbserial-ENVVBPXS
port: tty.usbserial-ENVVBPXS
imp.dmx.usbpro: Firmware Version = 1028
dump: firmware 1028
imp.dmx.usbpro: Device Serial = 34743417
dump: serial 34743417
dump: attributes mode blackout num_channels limit_framerate framerate break_time mab_time
dump: mode send
dump: blackout 0
dump: num_channels 512
dump: limit_framerate 1
dump: framerate 40
dump: num_channels 512
dump: break_time 96
dump: mab_time 11

objects are able to control at least sending and receiving dmx for the other option midi rdm
and standalone mode i don’t know but for basics everything runs fine.

Nov 24 2012 | 4:53 pm

I’m planning to add support for all the advanced functionality in the mark two but I haven’t got the hardware yet.

Viewing 2 posts - 1 through 2 (of 2 total)

Forums > MaxMSP