Forums > MaxMSP

NEED TO: Control multiple banks of RGB LEDs

Aug 03 2012 | 8:37 pm

I need to individually control multiple banks of RGB LEDs changing color, brightness, and on/off for a permanent installation. There are 66 separate banks and they use a 12v power source. Does anyone know of an interface that will allow this with Max? I’d appreciate any ideas.

Aug 04 2012 | 3:40 am

You want an arduino with a midi shield. not necessarily the "best" option, but most probably the best documented.

Aug 04 2012 | 3:54 am

Best way is via dmx. there are different interfaces such as lanbox or enttecc dmx usb pro…. Have the banks dmx input? if not, you can use some dmx decoders. I made good experience with these devices:

Viewing 3 posts - 1 through 3 (of 3 total)

Forums > MaxMSP