Forums > MaxMSP

waveform~ link outlet problem

Dec 10 2010 | 9:47 am


I’m experiencing a problem with waveform~: whenever I recall a prototype, the link outlet stops sending data.

To reproduce the problem, do the following:
– open the waveform~ help file, go to the "multi-channel" subpatch.
– unlock, recall the "" prototype for the upper waveform~.
– click "name stereowave 1" to re-set the buffer.
– interact with the mouse with the upper waveform~: nothing happens in the lower one

… of course I could be doing something wrong – I’m not a waveform~ guru ;)


OSX 10.6.5 – MMJ 5.1.7

Dec 10 2010 | 10:47 am prototype set the outmode attribute to 0. If you put it back to the default value (4), the link works back again.

Dec 10 2010 | 10:53 am

Thank you Emmanuel.

Maybe this should be more clearly documented – I quote from the doc for outmode: "Only the selection start and end (outlets 3 and 4) are affected."
This is why I didn’t try fiddling with it…


Viewing 3 posts - 1 through 3 (of 3 total)

Forums > MaxMSP