Trouble with clipping with saws

    May 07 2012 | 4:50 pm
    I think this is probably something mathematical that I don't get, but why is it that when I have two saw~ objects outputting a frequencies a major third from each other there is this rhythmical clipping? When you up the volume of the saws it seems to recede into the background, but as everything is in the patch when it loads, you'll hear the major third and also these weird little intermittent clips.
    perhaps also it is something to do with my sound card if you don't hear it.
    thanks, Ian

    • May 07 2012 | 5:21 pm
      Hi You might be experiencing 'beating': real oscillations at the frequency of the absolute difference between two frequencies; otherwise, if it is actual distorted clipping then it may be a soundcard issue:
    • May 07 2012 | 10:44 pm
      I know what you are talking about and hear it regularly in acoustic instruments tuning, but this sounds different, more like little clicks. Did you not hear them? Listening now makes me think you have to wait for a second to really hear them, they're not obvious..
      thanks for the reply anyways!
    • May 07 2012 | 11:20 pm
      i have not been looking at the patch, but did you do *~ 0.5 before summing?
      mind you, 1. + 1. makes 2. ...
    • May 08 2012 | 12:10 pm
      I tried multiplying them in half and then adding them, but it doesn't reduce the clips, nor does multiplying them by .2, the quieter they are as a matter of fact, the easier it is to hear the clicks. I hear the beating you're talking about n00b when the saws' frequencies are close to each other, but this sounds weirder, more like something unnatural. Perhaps it's something to do with adding saws, that you get weird combinations at higher frequencies.
    • May 09 2012 | 9:59 pm
      Could anyone check just to see if they can hear those rather annoying little clicks too? I'm curious if it has something to do with my machine. thanks
    • May 09 2012 | 10:44 pm
      How big are your vector sizes? in the audio status (max6) dsp status (max5) window?
    • May 10 2012 | 8:10 am
      I tried all different I/O and signal vector sizes, none of them make a difference in this case.