I am using a leap motion device and trying to use a grab trigger to freeze a video. Although i have set my scale and my grabs register as a bang in the leap window, it only registers as a 0.5 on the breakpoint. If i could get some advice on how to fix this that would be great as I am completely new to max.

Screen Shot 2019-09-16 at 5.22.33 pm.png

Screen Shot 2019-09-16 at 5.18.08 pm.png

Hi,
I am using a leap motion device and trying to use a grab trigger to freeze a video. Although i have set my scale and my grabs register as a bang in the leap window, it only registers as a 0.5 on the breakpoint. If i could get some advice on how to fix this that would be great as I am completely new to max.

Hi,
I am using a leap motion device and trying to use a grab trigger to freeze a video. Although i have set my scale and my grabs register a

scale-0-1-only-outputting-a-0-5

You are sending only bangs to scale object.

You are sending only bangs to scale object.
That produces 0.5 at the output.
What is change 0 and select 1 supposed to do ?
Makes no sense to me.


I had change 0 and select 1 thinking it would trigger a 1 on grab. If this isn't needed, what should i use to trigger the breakpoint from 0 to 1 when grabbing?

I don't know what You mean by triggering breakpoint.

Scale input range -220. - 220. to 0. 1., all foat ?

Or You want to produce a bang when certain value gets received ?

If all it receives is just a bang, it outpts 0.5 which is what would come out if received value was zero.

I don't know what You mean by triggering breakpoint.
What do You want to do in simple words ?
Scale input range -220. - 220. to 0. 1., all foat ?
Or You want to produce a bang when certain value gets received ?
--------
Wrong in Your patch is :
1- Float input runs through change 0, which then  outputs
integers if a value changed.
2- select 1 produces a bang when 1 gets received.
3- scale -220. 220. 0. 1. expects float values in the set range.
If all it receives is just a bang, it outpts 0.5 which is what would come out if received value was zero.
---------



sorry for my wording, simply, I just want to freeze the video when a grab is received through the leap device.

In that case You need to know what sort of message is needed for the freeze function.

What is that freezr patch that You are experimenting with ?

Does it not have any explanation how to use it ?

Anyway, what You receive from leapmotion under

 parameter is some kind of float range, or ?

You need to scale it or do whatever needed to use it for freeze function.

1 what do You get from leapmotion device (kind of message and range)

2 what is needed to trigger that freeze function.

In that case You need to know what sort of message is needed for the freeze function.
What is that freezr patch that You are experimenting with ?
Does it not have any explanation how to use it ?
Anyway, what You receive from leapmotion under
grabstrength parameter is some kind of float range, or ?
You need to scale it or do whatever needed to use it for freeze function.
So simply post this 2 infos :
1 what do You get from leapmotion device (kind of message and range)
2 what is needed to trigger that freeze function.

Otherwise I don't know how to help You.



Here's the information from grab strength and the instructions for the freezr.

If enabling the freeze requires a 0.-1.0 im not sure why i can't make the 

Screen Shot 2019-09-19 at 5.10.57 pm.png

Screen Shot 2019-09-19 at 5.10.47 pm.png

Here's the information from grab strength and the instructions for the freezr.
If enabling the freeze requires a 0.-1.0 im not sure why  i can't make the scale -220. 220. 0. 1.  work
thanks

It has breakpoint - one could think of something

If selector input is higher than breakpoint, it freezes the video.

If it is lower, video continues playback.

And it needs on/off message and module enable/disable 0 - 1

I think this examples are not helpful at all.

Too much stuff is hidden into complicated subpatches,

That's why I delete all that shit immediatelly.

You need to set breakpoint to desired value,

and what You receive from leapmotion needs to

I asked You to post range that comes from leapmotion,

posting a screenshot showing float 1. is just not giving any info.

Post 2 numbers, expected minimum and maximium values.

From that, one can see if any scaling needs to be done.

As You seem to like screenshots, here is one from me :

Screen shot 2019-09-19 at 09.32.27.png

Ok, I have looked into vizzie patch.
It has breakpoint - one could think of something
like threshold.
And it has selector input.
If selector input is higher than breakpoint, it freezes the video.
If it is lower, video continues playback.
And it needs on/off message and module enable/disable 0 - 1
to work.
I think this examples are not helpful at all.
Too much stuff is hidden into complicated subpatches,
instead of showing simple functioning.
That's why I delete all that shit immediatelly.
But now to Your problem :
You need to set breakpoint to desired value,
and what You receive from leapmotion needs to
be input into selector inlet.
If leapmotion outputs range 0. - 1.
why do You use that scale object ?
I asked You to post range that comes from leapmotion,
is that sooooo difficult ?
posting a screenshot showing float 1. is just not giving any info.
Post 2 numbers, expected minimum and maximium values.
From that, one can see if any scaling needs to be done.
If range from leapmotion is 0. - 1. than
scale -220. 220 0. 1. is absurd.
As You seem to like screenshots, here is one from me :


Scale 0. 1. only outputting a 0.5