My iPad running MIRA connects to my MacBook Pro M3 on the Thunderbolt 4 port but it only receives power on the USB3 port of my Satechi Type-C Multi-Port Adapter 4K and does not communicate with MAX.

It will communicate with MAX when I use USB-C to USB-A on the Satechi Type-C Multi-Port Adapter.

I'm trying to get my head around all the ports, the USB-C vs Thunderbolt communication on the new Macs because I want to use a USB-C adapter for my iPad MIRA to my Laptop communication.

My iPad running MIRA connects to my MacBook Pro M3 on the Thunderbolt 4 port but it only receives power on the USB3 port of my Satechi Type-C Multi-Port Adapter 4K and does not communicate with MAX. 

It will communicate with MAX when I use USB-C to USB-A on the Satechi Type-C Multi-Port Adapter.
Why?
I'm trying to get my head around all the ports, the USB-C vs Thunderbolt communication on the new Macs because I want to use a USB-C adapter for my iPad MIRA to my Laptop communication.

My iPad running MIRA connects to my MacBook Pro M3 on the Thunderbolt 4 port but it only receives power on the USB3 port of my Satechi ... 

mira-connection-usb3-and-thunderbolt-4

MIRA connection USB3 & Thunderbolt 4

Flo B

i was wondering if anyone is having the same problem or if it has something to do with my input device. 

When i move my fingers off the edges of the screen, mira.multitouch keeps the removed finger as an active circle on the border (move state = 2). So the count of fingers increases as soon as i put my finger back on the screen again – increasing the fingercount steadily until it reaches the maximum of 12.

There is no reset / clear message for the mira.multitouch, so i can only delete the entire mira.multitouch object at this point and make a new one, which makes it unusable :/ 

- I'm using the miraweb version on chrome

- using an android smartphone as multitouch input

- always occours, independently of the mira.multitouch size to the mira.frame or the mira.multitouch distance to the physical boarder of the phone

Hi there, 

i was wondering if anyone is having the same problem or if it has something to do with my input device. 
When i move my fingers off the edges of the screen, mira.multitouch keeps the removed finger as an active circle on the border (move state = 2). So the count of fingers increases as soon as i put my finger back on the screen again – increasing the fingercount steadily until it reaches the maximum of 12.

There is no reset / clear message for the mira.multitouch, so i can only delete the entire mira.multitouch object at this point and make a new one, which makes it unusable :/ 

Any help? 

Further Details: 
- I'm using the miraweb version on chrome
- using an android smartphone as multitouch input
- always occours, independently of the mira.multitouch size to the mira.frame or the mira.multitouch distance to the physical boarder of the phone

Hi there, 

i was wondering if anyone is having the same problem or if it has something to do with my input device. 
When i move my fingers 

mira-multitouch-lost-fingers-fingercount-issue-egde-loss

Hey, same problem here, but it happens on IOS, both on iPhone and iPad using miraWeb. I do have the MIRA app on my iPad (I am using miraWeb for my students) and there the problem does not happen. So I guess it has to do with the browser 

Hi Flo B and Stefano, thank you, I can reproduce this on mobile chrome and will get this ticketed with engineering — interestingly, I see this behavior specifically on chrome. If I view the same miraweb frame using safari, it works as I'd expect. 

If you have more info (like other browsers you've tested on, other devices) you can share, feel free to post it here or send it in an email to support@cycling74.com

I can reproduce it also in safari  ('normal' iPad 10.2" 2020)


Hi Alex, sorry for the long wait. I've currently only tested it as described in the first post. 
It's to this day still an issue I'm affraid,  but I'll try my way around using a different browser :) 
Thanks for the effort,  
Cheers

BUMP! anybody has a solution to the problem? Each semester I'd love to show multitouch to my students but this issue makes it unreliable...
Cheers
Stefano

there seems to be a problem also with the mt.rotate, there is no output for radians and the angular velocity has very low and jittery values. I am always speaking about mira web, all is fine when using the app. Problem seems to be the same with safari, chrome and firefox


Hi Stefano, thank you for following up here. I've bumped the fingercount issue for engineering, and made a new ticket to track the [mira.mt.rotate] issue, which I can reproduce.  

Hey, same issue here, except on iOS, affecting miraWeb-enabled iPhone and iPad. On my iPad, when I use MiraWeb for my students, the MIRA software, the issue does not occur. So I suppose the browser is to blame. 

I do not think it is connected explicit with the edges only. There is an old bug still open [1], regarding retaining past touches with [mira.multitouch] in general. Unfortunately. It makes it unusable to me without an Apple touch computer. 
Any chance for improvements? 
It is known and open on github, so I guess there is no point in reporting as a bug directly to Cycling74? 




mira.multitouch lost fingers / fingercount issue / egde loss

stefano delle monache

I'm trying to expose a simple max patch (bangs and message boxes) via mira outside the local network.

I'm aware of portforwarding issues (e.g., https://youtu.be/NUbr4IPSDz4), I've been trying the 07-tunneling example in the Xebra.js package, and I could successfully expose the max patch via virtual network such as ZeroTier, although the last solution requires that all the clients sign in the network.

Instead, I need to provide the user with a direct URL. My current attempts are the following:

localtunnel returns an HTTPS address, so I tried using ngrok for http only

I think there might be different issues at stake (first, I'm not an expert I must say), and I cannot figure out any workaround at the moment. 

Any help / hint / comment is really appreciated.

Hello, 
I'm trying to expose a simple max patch (bangs and message boxes) via mira outside the local network.
I'm aware of portforwarding issues (e.g., https://youtu.be/NUbr4IPSDz4), I've been trying the 07-tunneling example in the Xebra.js package, and I could successfully expose the max patch via virtual network such as ZeroTier, although the last solution requires that all the clients sign in the network. 

Using localtunnel:  lt -p 8086 -s webinterface -o
I open a tunnel to mira on port 8086 and open the browser at URL https://webinterface.localtunnel.me
The connection page to miraweb is correctly displayed, yet when I try to connect, I have the following errors

Mixed Content: The page at 'https://webinterface.loca.lt/' was loaded over HTTPS, but attempted to connect to the insecure WebSocket endpoint 'ws://webinterface.loca.lt:8086/'. This request has been blocked; this endpoint must be available over WSS.

Uncaught DOMException: Failed to construct 'WebSocket': An insecure WebSocket connection may not be initiated from a page loaded over HTTPS.

Using ngrok: ngrok http 8086
ngrok returns both http and https links. I open the http link, the mira connection page is correctly displayed, yet the connection times out

WebSocket connection to 'ws://a166affc8f13.ngrok.io:8086/' failed: Error in connection establishment: net::ERR_CONNECTION_TIMED_OUT

I think there might be different issues at stake (first, I'm not an expert I must say), and I cannot figure out any workaround at the moment. 
Any help / hint / comment is really appreciated.
Best,
Stefano

Hello, 
I'm trying to expose a simple max patch (bangs and message boxes) via mira outside the local network.
I'm aware of portforwarding is

expose-mira-via-localtunnel-ngrok

Hi Stefano, I know your post is old but I am having similar issues both with the exact code from this tutorial and also a patch/client code of my own. I can't find any similar threads

Did you ever solve this problem?

If not - maybe somebody else knows how to make a WSS connection with Xebra.js?

I don;t have the option of running HTTP because I am trying to use accelerometer data, which will be blocked unless the client page is secured. So the mixed content message seems inevitable unless Xebra can deal with a secured websocket.

I'm very bad with network topics so even when I get to solve similar issues couple years ago (using paid ngrok with custom url exposing a subdomain of my private website with dedicated SSL certificate) I forgot everything I learned.

Is there some known recipe allowing to expose Mira via a public url?

I'm trying to display screenshots of my Mac's screen updated frequently so the audience can watch the generative score of a piece (bach etc.) during a live performance. Seems overkill but less heavy than streaming a video.

Oh also, to add some fun I'm living in China so with audience here I'd be looking for a solution that would NOT require a VPN… 😅

expose Mira via localtunnel / ngrok

Philip Mantione

First time posting here. Have a gig on Saturday so I'm hoping to figure this out.

iPAD Air 2 (model MGTX2LL/A) with OS 9.3.4

Using MIRA to control both a Stand-alone Max patch and a custom M4L device in Ableton.

Works great! Except, when I change apps on the iPad I get a momentary audio dropout on any audio files being played by Ableton as well as live inputs. I have tried a straight WiFi internet connection and a local network...same result.

It's almost as if MIRA has to reconnect whenever I change apps. I looked for a "run in background" setting but did not see one. Other apps allow flawless switching without dropouts.

First time posting here.  Have a gig on Saturday so I'm hoping to figure this out. 

I'm using:
Ableton Live 9
MacBook Pro 2.8 i7 with OS 10.11.5
MAX 7.2.3 with Mira
iPAD Air 2 (model MGTX2LL/A) with OS 9.3.4
iConnect Audio4+ Interface

Works great! Except, when I change apps on the iPad I get a momentary audio dropout on any audio files being played by Ableton as well as live inputs.  I have tried a straight WiFi internet connection and a local network...same result.

It's almost as if MIRA has to reconnect whenever I change apps. I looked for a "run in background" setting but did not see one.  Other apps allow flawless switching without dropouts.

switching-to-mira-from-other-apps-causes-audio-dropouts

Phil, sorry to resurrect a dead thread (especially whilst offering no help), curious to know if you resolved the issue.

Switching to MIRA from other apps causes audio dropouts

When adding mc.meter to presentation it works and behaves nicely. But on Mira it only displays the first meter and only horizontally.

When adding mc.meter to presentation it works and behaves nicely. But on Mira it only displays the first meter and only horizontally.
I'm gu

mc-meter~-not-behaving-in-mira

For me, it only displays the first 2 channels of a 6-channel signal.

mc.meter~ not behaving in Mira.

Helga Arias Parra

When opening a patch written on a MacOs Catalina 10.15.7 in Monterrey 12.4 I get the error message Mira.frame no such object.

Mira and miraweb are installed on the new computer. Any clues what is causing this?

When opening a patch written on a MacOs Catalina 10.15.7 in Monterrey 12.4 I get the error message Mira.frame no such object.
Mira and miraweb are installed on the new computer. Any clues what is causing this?

When opening a patch written on a MacOs Catalina 10.15.7 in Monterrey 12.4 I get the error message Mira.frame no such object.
Mira and miraw

mira-frame-no-such-object-1

Mira.frame no such object

benj3737

I'm solid with max but I'm pretty clueless about node.

From my research it seems like we can delete files with node.

Does anyone have an example or suggestion on where to look?

Hello!
I'm solid with max but I'm pretty clueless about node.
From my research it seems like we can delete files with node.
Does anyone have an example or suggestion on where to look?
Thank you
Ben

Hello!
I'm solid with max but I'm pretty clueless about node.
From my research it seems like we can delete files with node.
Does anyone have

delete-a-file-with-node-for-max

I'm doing more research and I found the filesystem page of the Node for Max overview.
However, when I send a 'rm' command to node, I get an error saying 

'node.script: Node script not ready can't handle message rm'

If you can't manage to run node script ??? , try to use shell object.
it needs absolute path to file to delete, slash based.
If this is to delete sfrecord files, you could use savedialog to make file
in first place, and use same path to delete it later.

Option 2 is to record into buffer, if recording is not that long,
then crop and write buffer if you want to keep recording.


Here's something I adapted from the Node4Max overview.

As far as I can tell, I should be able to drop a file in the patcher, and have Node delete it, but I get an error.

check path.
all this shell based objects need slash based path

This won't work:
"Mac Hd:/Users/user/Desktop/File to delete.rtf"
this does:
"/Users/user/Desktop/File to delete.rtf"

Read conformpath help, and set it according to
OS used.
on Mac :


By the way - using node forces one to use CEF framework,
which then makes Standalone apps much bigger size.
Using shell object instead is much easier.


Delete a file with Node for Max

davidestevens

I just tried out the new version of Mira, and all of the mira.frame windows on my ipad are now slightly bigger than the screen. They fit side to side, but not top to bottom. I can't see any settings that might affect this.

I just tried out the new version of Mira, and all of the mira.frame windows on my ipad are now slightly bigger than the screen. They fit side to side, but not top to bottom. I can't see any settings that might affect this.
What's happened?


I just tried out the new version of Mira, and all of the mira.frame windows on my ipad are now slightly bigger than the screen. They fit sid

mira-frame-no-longer-fits-ipad-window!

Mira.frame no longer fits ipad window!

Monib Ahmed

Hi, I have a 11" iPad Pro, any idea when the App will be updated to reflect the new resolution?

Hi, I have a 11" iPad Pro, any idea when the App will be updated to reflect the new resolution?
Thanks,
Monib

mira-ipad-pro

could you explain the issue on the 11" iPad? I'm currently thinking about whether to get the 11" pro or 12,9" pro. But when I read that the 11" has issues I'm afraid the 12,9" will also have problems. 

By the way,  do you have by chance any experience with the iPad sizes factor for music? I have never used Mira so far and I'm leaning toward the 11" at the moment, because I want to use it not only in the studio and 11" is already a lot bigger than the old iPad.  Sure, bigger screens are nice but the 12,9" i's already pretty big and a lot more expensive. I'm a bit afraid to decide eventually for the wrong size and regret it when I use Mira on it. 

Hi  Monib, 
could you explain the issue on the 11" iPad? I'm currently thinking about whether to get the 11" pro or 12,9" pro. But when I read that the 11" has issues I'm afraid the 12,9" will also have problems. 

MIRA iPad Pro

Paolo Pastorino

As I wrote in the title, Mira is unable to detect these gestures. Yesterday I was working without problems and all the messages were sent correctly but today swipe and tap are not detected by any device (ipad, cellphone, browser).

Hello everyone!
As I wrote in the title, Mira is unable to detect these gestures. Yesterday I was working without problems and all the messages were sent correctly but today swipe and tap are not detected by any device (ipad, cellphone, browser).


Hello everyone!
As I wrote in the title, Mira is unable to detect these gestures. Yesterday I was working without problems and all the messa

tap-and-swipe-gestures-are-not-detected

Tap and swipe gestures are not detected.

Ben Bracken

 Package, as well as published updates to 

For a more detailed overview of involved bugfixes and enhancements please refer to the change log below or visit the GitHub repository (

https://www.npmjs.com/package/xebra-communicator

We've released a small update to the Miraweb Package, as well as published updates to Xebra.js and Xebra-Communicator on NPM.

For a more detailed overview of involved bugfixes and enhancements  please refer to the change log below or visit the GitHub repository (https://github.com/Cycling74/miraweb)

You can find Miraweb 1.2.5 in the Max Package Manager.

Xebra.js and Xebra-Communicator are on NPM:
https://www.npmjs.com/package/xebra.js
https://www.npmjs.com/package/xebra-communicator 

number: no longer produces unnecessary NaN

Pixi.js: removed custom PixiJS dependency

Max 8 compatibility: live.dial, message, umenu, meter~

live.tab: only output when tab selection changes

We've released a small update to the Miraweb Package, as well as published updates to Xebra.js and Xebra-Communicator on NPM.
For a more det

Cycling '74 Forums

We've released a small update to the Miraweb Package, as well as published updates to Xebra.js and Xebra-Communicator on NPM. For a more det

My iPad running MIRA connects to my MacBook Pro M3 on the Thunderbolt 4 port but it only receives power on the USB3 port of my Satechi ...

I do not think it is connected explicit with the edges only. There is an old bug still open [1], regarding retaining past touches with...

Anyone got some success with this issue? I'm very bad with network topics so even when I get to solve similar issues couple years ago...

Phil, sorry to resurrect a dead thread (especially whilst offering no help), curious to know if you resolved the issue.

For me, it only displays the first 2 channels of a 6-channel signal.

When opening a patch written on a MacOs Catalina 10.15.7 in Monterrey 12.4 I get the error message Mira.frame no such object. Mira and miraw

check path. all this shell based objects need slash based path This won't work: "Mac Hd:/Users/user/Desktop/File to delete.rtf" this...

I just tried out the new version of Mira, and all of the mira.frame windows on my ipad are now slightly bigger than the screen. They fit sid

Hi Monib, could you explain the issue on the 11" iPad? I'm currently thinking about whether to get the 11" pro or 12,9" pro. But when I...

Hello everyone! As I wrote in the title, Mira is unable to detect these gestures. Yesterday I was working without problems and all the messa