James Batty

I would really appreciate any help on this problem!

I have a list of combinations (around 2000 in total) of instruments, like:

I want to order them according to these rules:

- an instrument must be in >= 2 consecutive combinations

- there must be >= 2 combinations between an instrument starting/ending

I tried using a zl object but could not work out a way to work with combinations rather than individual list entries.

Riot Combos 2-10 minus start and end (1922).txt

I have a list of combinations (around 2000 in total) of instruments, like:
Fl Cl Vn Va Db
Cl Vn Hn Vc
Bsn Hn Pno
(I attached the full list)

I want to order them according to these rules:
- an instrument must be in >= 2 consecutive combinations
- there must be >= 2 combinations between an instrument starting/ending

I would really appreciate any help on this problem!
I have a list of combinations (around 2000 in total) of instruments, like:
Fl Cl Vn Va D

ordering-permutationscombinations

Ordering Permutations/Combinations?

Matéo Esnault

I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 

I'm connected to an MY16 AUD-2 Dante external card, (16x16, DVS latency setting : 10ms, static ip)

When I use a DAW like Ableton or reaper, I don't have any latency issues (the dante latency monitor shows me an average of 1 or 2 ms), but when I launch Max and create an dac or mc.dac objet, the dante latency starts being a mess.

For exemple, after a few minutes of running my dvs : 

I tried on differents computer and i don't have this issue (I have a macbook Pro 2017 3,5 GHz Intel Core i7 dual core)

My hypothesis is that there is a problem with the coreaudio management by max. 

Hi, 
I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 
I'm connected to an MY16 AUD-2 Dante external card, (16x16, DVS latency setting : 10ms, static ip)
When I use a DAW like Ableton or reaper, I don't have any latency issues (the dante latency monitor shows me an average of 1 or 2 ms), but when I launch Max and create an dac or mc.dac objet, the dante latency starts being a mess.
For exemple, after a few minutes of running my dvs :  
Peak Value : 60ms
Late : 210

I tried on differents computer and i don't have this issue (I have a macbook Pro 2017 3,5 GHz Intel Core i7 dual core)
My hypothesis is that there is a problem with the coreaudio management by max. 

Thanks in advance,
Matéo


Hi, 
I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 
I'm connected to an MY16 AUD-2 Dante external card, (

dante-virtual-soundcard-and-max-latency

Dante Virtual Soundcard and MAX Latency

Lorenzo Lamasse

Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:

Here is the subpatcher that does the blink:

image.png

And here is what happens from time to time when I click the tex triggering element (bangs from 0 to 1):

panelbug.gif

It seems that the panel is NOT updated until the mouse hovers it, which is an unexpected behavior...

Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:
Here is the subpatcher that does the blink:


And here is what happens from time to time when I click the tex triggering element (bangs from 0 to 1):


It seems that the panel is NOT updated until the mouse hovers it, which is an unexpected behavior...
Any similar experience or clue ?
Thanks !


Hi all,
Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:
Here is the subpatcher that 

weird-behavior-of-panel

Interesting. Please use "Copy Compressed" and paste relevant code in your post, that's much easier to try and help you.
I can't reproduce what you describe (I'm on Mac). I used this test patch:


i know two situations where graphics eventually might not update in time; while the mouse os down on the object which shows the graphics, or when the mouse is down and its output is moved into high priority, like in your patch.

however i have never seen that something only updates only after mouseover. :)

here is what i use.



Maybe some weird side effect, the issue has lasted for like 2 days, but seems to be gone this morning, though I have not exitted Max or Live at all. Very weird... A GPU glitch, don't know if this is some OpenGL refreshing that was stuck somewhere, but it seems fixed for now... I'll report if it happens again. 
BTW, your patch works without any issue (with no surprise here).
Thanks for taking the time anyway !


Weird behavior of panel

Dan Nigrin

For a few different reasons, I need to use a umenu in one instance for an application I'm building. In all other parts of the app, I'm using live.menu objects however, and so I would like to make the umenu look exactly like the live.menu's. I can get close with the various color options available in umenu, but it's not quite right.

This is a long shot, but has anyone created a custom jspainter file that could be used with the umenu to make it look like the live.menu?

For a few different reasons, I need to use a umenu in one instance for an application I'm building.  In all other parts of the app, I'm using live.menu objects however, and so I would like to make the umenu look exactly like the live.menu's.  I can get close with the various color options available in umenu, but it's not quite right.  

For a few different reasons, I need to use a umenu in one instance for an application I'm building.  In all other parts of the app, I'm usin

make-a-umenu-visually-look-like-a-live-menu-using-jspainter-file

Hi Dan. Does this workaround help?
https://cycling74.com/forums/sharing-method-to-populate-a-live-menu 

Thanks Pedro, but I'm already aware of the _parameter_range trick - see https://cycling74.com/forums/changing-live-menu-items-on-the-fly .  Unfortunately it still doesn't address some other challenges I've got currently with live.menu....

make a umenu visually look like a live.menu using jspainter file?

zion

I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a different audio track's input, that maybe contains standards Live instruments etc... 

I know how to path a track in the LOM system but not sure how and if possible to send audio signal via that system..

Hi,
I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a different audio track's input, that maybe contains standards Live instruments etc... 
I know how to path a track in the LOM system but not sure how and if possible to send audio signal via that system..
a small patch or reference would help.
Thanks!

Hi,
I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a dif

splitting-audio-signal-in-a-m4l-device-to-a-different-audio-track's-input

https://cycling74.com/articles/audio-routes-using-audio-routes-tooling-for-your-mfl-devices

Splitting Audio signal in a M4L device, to a different audio track's input

IntuitionPalace

Hi everyone! I'm very new to this, so this is probably a very newb question.

I'm trying to build a little system that generates cycles of notes/bars with a different tempo and length for each cycle/bar, then stops after n cycles. This works quite well when cycle lengths and tempos are randomly generated.

However, I've been trying to replace random selection of length and tempo values by [zl queues] – supposedly reading values in a list, and serving them one after the other at each new bang. This creates all sorts of problems. [zl queues] seem to be working/not working on a whim (I guess they don't but they seem to!), although patching triggers seem to help. They also seem to compete somehow with one another and generate sudden packs of rapid bangs, which I'd like to prevent.

Any idea what goes wrong here? I would be immensely grateful! Cheers

post.maxpat

Hi everyone! I'm very new to this, so this is probably a very newb question. 

I'm trying to build a little system that generates cycles of notes/bars with a different tempo and length for each cycle/bar, then stops after n cycles. This works quite well when cycle lengths and tempos are randomly generated. 

Hi everyone! I'm very new to this, so this is probably a very newb question. 
I'm trying to build a little system that generates cycles of n

issue-with-zl-queue

1 . check what and when gets sent from counter min max flag outlets.
you need to insert sel 1

2. this whole construct is too complicated.
you could try to use line object to count from - to with set interval.

I usually use coll but this time I used umenu to insert list pairs


Yeah the first thing is to use sel 1.
 I agree that the structure is too complicated.
Anyway if you want to have a changing count choosen from a zl queue you need some gate system like this:

Many thanks to you both for taking the time of rebuilding better versions of the structure. This is invaluable advice. I'll take some time to study this! Cheers 

Many thanks to you both for taking the time to rebuild better versions of the structure. This is invaluable advice. I'll take some time to study this. Thanks again, cheers!

Issue with zl queue?

Thomas 

Since the mixer in Ableton can only mix audio signals, I am looking for a M4L plugin that can control the automation of any midi track for an external instrument in the project via knobs or sliders. The only possibility is to set the automation e.g. cc7 to a suitable value to adjust the volume. And that for each track separately. I don't like that at all about Ableton.

I'm looking for a mixer that runs in one track but can control any other tracks volume via cc7 or cc11. 

Hello
I am looking for something special.
Since the mixer in Ableton can only mix audio signals, I am looking for a M4L plugin that can control the automation of any midi track for an external instrument in the project via knobs or sliders. The only possibility is to set the automation e.g. cc7 to a suitable value to adjust the volume. And that for each track separately. I don't like that at all about Ableton.
I'm looking for a mixer that runs in one track but can control any other tracks volume via cc7 or cc11. 
Is there something like this somewhere?

Hello
I am looking for something special.
Since the mixer in Ableton can only mix audio signals, I am looking for a M4L plugin that can cont

m4l-device-that-controls-cc7-or-cc11-for-midi-tracks-in-project

You could try an external  that allows to send midi
from one M4L device on different channels

https://www.theimpersonalstereo.com/max-externals 

Example (on Mac):

Jumping on this topic. Do you know if it's possible to use Live's new MPE abilities to send MIDI over several channels ? 
https://cycling74.com/forums/is-it-possible-to-use-mpe-track-output-to-send-midi-on-various-channels

With MPE individual notes are dynamically assigned to different channels. I don't see how this feature could be used to send ordinary MIDI on various channels.


I thought MPE was nothing but sending notes on different channels. I don't know, in Max, where is the voice allocation handled, but I thought there might be a way to explicitly target a specific voice. 
Naively I thought this patch would work, when MPE is selected as the output of a MIDI track. But the output differs from what's printed in the Max window. 



"I thought MPE was nothing but sending notes on different channels."

that was what we did before MPE. :) but sure, it is quite similar.

the conversion to regular channel data is your least problem though, because i doubt that a live device can send midi events  to different places.


Well, maybe I don't get your point but if I configure a MIDI track output to MPE and route it to a virtual MIDI port, then monitor it in Max, it's received as normal MIDI note on different channels. So it does have the ability to send MIDI over different channels at the same time.

M4L Device, that controls cc7 or cc11 for midi tracks in project?

Tobias Miorin

colour-swatch-mapping

Problem solved

Volker Junginger

I have build a Max for Live Wrapper for the dearVR Pro plugin to use it with envelop toolkit as an alternative panning device. Everything works fine except the fact that if I change any setting in the plugin parameters are not recalled when opening the project again.

In tried to use the pattr object but with no luck: Changing anything via the plugin gui is still not saved. 

Using Live dials to change the parameter has an other quite strange behaviour. Only two of the three parameters are recalled.

Anyone who could tell me what I am doing wrong?

DearVR Pro Wrapper.amxd

In tried to use the pattr object but with no luck: Changing anything via the plugin gui is still not saved. 

Using Live dials to change the parameter has an other quite strange behaviour. Only two of the three parameters are recalled.

Anyone who could tell me what I am doing wrong?

Thanks in advance!

I have build a Max for Live Wrapper for the dearVR Pro plugin to use it with envelop toolkit as an alternative panning device. Everything wo

save-vst-parameter-within-patch


you seem to have correctly set "parameter visibility - automated and stored" for the live.dial objects, but your problem is that the message it creates reaches the vst~ object before the plug-in has loaded.

Save VST parameter within Patch

Spenser Barlow

As the subject says, using a live.numbox to display a midi note is not showing the current note in the web browser. The box itself is visible. Any ideas?

As the subject says, using a live.numbox to display a midi note is not showing the current note in the web browser. The box itself is visibl

live-numbox-with-unit-style-of-"midi-note"-not-showing-note

live.numbox with Unit Style of "Midi Note" not showing note

Ben Bracken

. The Runner provides plug and play access to a 

 from the Max application, using using OSCQuery for communication with the running code.

This update features a new web-based interface with routing capabilities, expanded hardware support, along with many other improvements and bug fixes. Improvements include:

We've also rolled in direct support for the 

 add-on package, and have included a number of other improvements and bug fixes. Check out the release notes 

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager.

With this update, we are...

rnbo-130-released

RNBO 1.3.0 Released

We are excited to announce the availability of our 

 as a public beta. We’ve worked closely with 

. The Eventide H9000 is a rack-sized multi-effects unit with powerful DSP processing capabilities and numerous high quality built-in effects. We’re excited to enable RNBO export for this and open the door to unique custom studio effects and instruments without the strict limitations of other hardware platforms.

RNBO support is similar to the existing Gen support, but more streamlined, and uses the built-in 

, rather than a watcher patcher, to manage the export process. Eventually, all of these changes will be rolled into the standard release versions of RNBO and this package.

Get the preview version of the RNBO package (v1.2.7-eventide.0):

Get the preview version of the "Eventide H9000" package (v1.0.4-beta.3):

We’d love to hear any experiences and feedback from RNBO users with access to an H9000. To join the discussion, use the 

We are excited to announce the availability of our Eventide package for RNBO as a public beta. We’ve worked closely with Eventide to bring...

Cycling '74 Forums

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager. With this update, we are...

We are excited to announce the availability of our Eventide package for RNBO as a public beta. We’ve worked closely with Eventide to...

I would really appreciate any help on this problem! I have a list of combinations (around 2000 in total) of instruments, like: Fl Cl Vn Va D

Hi, I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. I'm connected to an MY16 AUD-2 Dante external card, (

Maybe some weird side effect, the issue has lasted for like 2 days, but seems to be gone this morning, though I have not exitted Max or...

Thanks Pedro, but I'm already aware of the _parameter_range trick - see https://cycling74.com/forums/changing-live-menu-items-on-the-fly ....

https://cycling74.com/articles/audio-routes-using-audio-routes-tooling-for-your-mfl-devices

Many thanks to you both for taking the time of rebuilding better versions of the structure. This is invaluable advice. I'll take some time...

Well, maybe I don't get your point but if I configure a MIDI track output to MPE and route it to a virtual MIDI port, then monitor it in...

maybe you could try hsl message.

you seem to have correctly set "parameter visibility - automated and stored" for the live.dial objects, but your problem is that the...

As the subject says, using a live.numbox to display a midi note is not showing the current note in the web browser. The box itself is visibl