Ernest

These are some simple gen~ methods for Husserl2's 5D filter, plus some EQs, available as supplemental downloads in two new sections at the top of the SynthCore project page. Both sections have gen~ codebox listings, in editable syntax-highlighted code.

Neither use external buffer data, so the methods can simply be copied into your own patches and function properly without further work.

These are some simple gen~ methods for Husserl2's 5D filter, plus some EQs, available as supplemental downloads in two new sections at the top of the SynthCore project page. Both sections have gen~ codebox listings,  in editable syntax-highlighted code. 

The filter is a Butterworth cascade with mixers after each stage, followed by an oversampling tanh-based saturator, with mirror-based distortion at higher saturation settings. The filter is continuously variable between 100,000 unique filter settings via five dials to set Fc, resonance, 4-pole/2-pole/direct mix, lowpass/bandpass/highpass mix, and saturation.  

The EQ patch includes single- and dual-pole low, high, and peak shelving EQs.  There are no EQs in the gen~ examples, so this is just to plug a little hole in the code available. 

Neither use external buffer data, so the methods can simply be copied into your own patches and function properly without further work.    

These are simple gen~ methods for Husserl2's 5D filter, plus some EQs, in supplemental downloads at the top of ths synthcore project page. g

synthcore-gen~-library-filter-and-eq-supplements

Interesting that the cutoff is set/limited to 12tET pitches....

This is amazing Ernest. Would you like to present it at our next official Max Meetup on Sat Dec 18th at 5pm CET?

https://musichackspace.org/events/max-meetup-december-18th/ 

We are currently looking for presenters to showcase their work via Zoom. If you would like to present (approx 10-15 mins) feel free to get in contact via phelan@musichackspace.org.

HI Phelan, I don't really have anything to say on the synthcore library, but you're welcome to present it or use it any way you wish. Best wishes.  

SynthCore gen~ library Filter and EQ supplements

Mario Fernando Cardoso

Do you know how to get only one number at a time? Trying to make a cartesian type sequencer where both X and Y axes have their own speed. But when they move at the same time they trigger two sounds at the same time (they trigger two steps from live.step at the same time). 

When X and Y moves together, seems like they are triggered with minimum miliseconds diference and therefore sound like they were triggered at the same time. I want only the last triggered number, not the first one. 

I only want the number of the indicated numbox. I only want one step triggered at a time.

cart sequencer v1.amxd

cart sequencer.maxpat

yaaaa.mp4

 Hi!
Do you know how to get only one number at a time? Trying to make a cartesian type sequencer where both X and Y axes have their own speed. But when they move at the same time they trigger two sounds at the same time (they trigger two steps from live.step at the same time). 
When X and Y moves together, seems like they are triggered with minimum miliseconds diference and therefore sound like they were triggered at the same time. I want only the last triggered number, not the first one. 
I only want the number of the indicated numbox.  I only want one step triggered at a time. 

 Hi!
Do you know how to get only one number at a time? Trying to make a cartesian type sequencer where both X and Y axes have their own spee

getting-two-numbers-at-the-same-time-i-want-just-one-at-a-time

Haven't tested this, but suspect the problem lies in the double triggering after the unpack (that button/bang that forces the calculation). Does this work?


Hey!
Nop, still sounds two notes at the same time, but now the calculation area looks cleaner!
I came up with this sketchy solution using tresh, unpack and a gate controlled by zl.len.
Now it sounds one step at a time (it works) but I havent test it that much... feels sketchy.

{
	"boxes" : [ 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Sketchy solution ----->",
				"numoutlets" : 0,
				"id" : "obj-5",
				"patching_rect" : [ 188.0, 723.0, 319.000001788139343, 33.0 ],
				"fontsize" : 22.640895993024319,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "gswitch2",
				"numoutlets" : 2,
				"outlettype" : [ "", "" ],
				"id" : "obj-2",
				"patching_rect" : [ 478.0, 762.0, 39.0, 32.0 ],
				"numinlets" : 2,
				"int" : 1,
				"parameter_enable" : 0
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "if $i1 > 2 then 0",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-192",
				"patching_rect" : [ 729.0, 723.0, 91.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "message",
				"text" : "2",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-189",
				"patching_rect" : [ 629.5, 687.0, 50.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "message",
				"text" : "1",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-188",
				"patching_rect" : [ 664.0, 767.0, 50.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "zl.len",
				"numoutlets" : 2,
				"outlettype" : [ "", "" ],
				"id" : "obj-187",
				"patching_rect" : [ 615.0, 719.0, 37.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "if $i1 == 2 then 1",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-186",
				"patching_rect" : [ 700.0, 690.49998400000004, 98.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "unpack i i i i",
				"numoutlets" : 4,
				"outlettype" : [ "int", "int", "int", "int" ],
				"id" : "obj-1",
				"patching_rect" : [ 495.0, 723.0, 71.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "message",
				"text" : "13 14",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-184",
				"patching_rect" : [ 437.0, 707.00001599999996, 50.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "thresh 20",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-23",
				"patching_rect" : [ 495.0, 687.500016000000073, 74.0, 23.0 ],
				"fontsize" : 13.0,
				"numinlets" : 2,
				"fontname" : "Arial"
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Getting two notes at the same time... Dont want this",
				"linecount" : 2,
				"numoutlets" : 0,
				"id" : "obj-8",
				"patching_rect" : [ 560.333322048187256, 1016.333330512046814, 337.0, 59.0 ],
				"fontsize" : 22.640895993024319,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "I only want the lighted step note\n<-----",
				"linecount" : 2,
				"numoutlets" : 0,
				"id" : "obj-3",
				"patching_rect" : [ 902.000003337860107, 791.666667699813843, 382.000001788139343, 59.0 ],
				"fontsize" : 22.640895993024319,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "I only want this number ----->",
				"numoutlets" : 0,
				"id" : "obj-181",
				"patching_rect" : [ 150.0, 630.0, 319.000001788139343, 33.0 ],
				"fontsize" : 22.640895993024319,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Trying to make kind of a cartesian sequencer... Both X and Y axes have their own counter speed",
				"linecount" : 2,
				"numoutlets" : 0,
				"id" : "obj-180",
				"patching_rect" : [ 19.999999165534973, 209.333333134651184, 440.666675329208374, 40.0 ],
				"fontsize" : 14.454136124571647,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Problem: when X and Y changes at the same time, it sounds two notes at the same time (see kslider)... I only want one note at a time",
				"linecount" : 3,
				"numoutlets" : 0,
				"id" : "obj-179",
				"patching_rect" : [ 19.999999165534973, 261.05358350544833, 438.666675329208374, 56.0 ],
				"fontsize" : 14.391437772700527,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Y",
				"numoutlets" : 0,
				"id" : "obj-177",
				"patching_rect" : [ 695.666669487953186, 215.0, 27.333329677581787, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "Y",
				"numoutlets" : 0,
				"id" : "obj-176",
				"patching_rect" : [ 577.666670322418213, 11.170000000000002, 27.333329677581787, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "X",
				"numoutlets" : 0,
				"id" : "obj-175",
				"patching_rect" : [ 510.666670322418213, 60.0, 27.333329677581787, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "message",
				"text" : "3",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-171",
				"patching_rect" : [ 1200.0, 45.0, 50.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "loadbang",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-169",
				"patching_rect" : [ 1200.0, 15.0, 58.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "direction",
				"numoutlets" : 0,
				"id" : "obj-168",
				"patching_rect" : [ 775.666671395301819, 138.0, 56.666663885116577, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "direction",
				"numoutlets" : 0,
				"id" : "obj-167",
				"patching_rect" : [ 1035.8333340883255, 194.833333134651184, 56.666663885116577, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "prob",
				"numoutlets" : 0,
				"id" : "obj-166",
				"patching_rect" : [ 934.166662573814392, 132.0, 56.666663885116577, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "prob",
				"numoutlets" : 0,
				"id" : "obj-165",
				"patching_rect" : [ 1157.166669249534607, 175.333333134651184, 56.666663885116577, 20.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "comment",
				"text" : "start here\n(start counters)",
				"linecount" : 2,
				"numoutlets" : 0,
				"id" : "obj-164",
				"patching_rect" : [ 640.33333432674408, 11.170000000000002, 138.0, 47.0 ],
				"fontsize" : 17.598684390001939,
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "kslider",
				"numoutlets" : 2,
				"mode" : 1,
				"hkeycolor" : [ 0.996078431372549, 0.0, 0.0, 1.0 ],
				"outlettype" : [ "int", "int" ],
				"id" : "obj-162",
				"patching_rect" : [ 561.333322048187256, 1072.666672468185425, 336.0, 53.0 ],
				"numinlets" : 2,
				"parameter_enable" : 0
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "+ 3",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-141",
				"patching_rect" : [ 555.0, 510.0, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "/ -1",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-142",
				"patching_rect" : [ 555.0, 480.0, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "change 0",
				"numoutlets" : 3,
				"outlettype" : [ "", "int", "int" ],
				"id" : "obj-140",
				"patching_rect" : [ 555.0, 435.0, 58.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "+ 1",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-136",
				"patching_rect" : [ 494.5, 433.0, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "number",
				"numoutlets" : 2,
				"outlettype" : [ "", "bang" ],
				"id" : "obj-32",
				"patching_rect" : [ 555.0, 390.0, 53.0, 23.0 ],
				"fontsize" : 13.0,
				"numinlets" : 1,
				"parameter_enable" : 0,
				"fontname" : "Arial"
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "number",
				"numoutlets" : 2,
				"outlettype" : [ "", "bang" ],
				"id" : "obj-135",
				"patching_rect" : [ 495.0, 390.0, 53.0, 23.0 ],
				"fontsize" : 13.0,
				"numinlets" : 1,
				"parameter_enable" : 0,
				"fontname" : "Arial"
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "unpack 0 0 0",
				"numoutlets" : 3,
				"outlettype" : [ "int", "int", "int" ],
				"id" : "obj-36",
				"patching_rect" : [ 495.0, 360.0, 136.0, 23.0 ],
				"fontsize" : 13.0,
				"numinlets" : 1,
				"fontname" : "Arial"
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "attrui",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-129",
				"attr" : "mode",
				"patching_rect" : [ 555.0, 630.0, 150.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "number",
				"numoutlets" : 2,
				"outlettype" : [ "", "bang" ],
				"id" : "obj-127",
				"patching_rect" : [ 495.0, 630.0, 50.0, 22.0 ],
				"numinlets" : 1,
				"parameter_enable" : 0
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "+ 0",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-49",
				"patching_rect" : [ 495.0, 585.0, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.numbox",
				"varname" : "live.numbox[4]",
				"numoutlets" : 2,
				"outlettype" : [ "", "float" ],
				"id" : "obj-110",
				"patching_rect" : [ 782.000003337860107, 152.5, 44.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 2.0,
						"parameter_initial" : [ 0.0 ],
						"parameter_shortname" : "live.numbox",
						"parameter_type" : 0,
						"parameter_unitstyle" : 0,
						"parameter_longname" : "live.numbox[5]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "+ 1",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-109",
				"patching_rect" : [ 1028.8333340883255, 266.999999523162842, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "+ 1",
				"numoutlets" : 1,
				"outlettype" : [ "int" ],
				"id" : "obj-108",
				"patching_rect" : [ 810.0, 225.0, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.numbox",
				"varname" : "live.numbox[3]",
				"numoutlets" : 2,
				"outlettype" : [ "", "float" ],
				"id" : "obj-137",
				"patching_rect" : [ 1039.3333340883255, 209.333333134651184, 44.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 2.0,
						"parameter_initial" : [ 0.0 ],
						"parameter_shortname" : "live.numbox",
						"parameter_type" : 0,
						"parameter_unitstyle" : 0,
						"parameter_longname" : "live.numbox[4]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "delay 0",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-131",
				"patching_rect" : [ 829.0, 147.5, 47.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "delay 0",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-130",
				"patching_rect" : [ 1086.8333340883255, 144.833333134651184, 47.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "message",
				"text" : "0",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-107",
				"patching_rect" : [ 672.333330869674683, 91.829999999999998, 29.5, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "button",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-57",
				"patching_rect" : [ 1100.8333340883255, 179.333333134651184, 24.0, 24.0 ],
				"numinlets" : 1,
				"parameter_enable" : 0
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "p probability",
				"numoutlets" : 2,
				"outlettype" : [ "bang", "" ],
				"id" : "obj-58",
				"patching_rect" : [ 1100.8333340883255, 218.333333134651184, 73.0, 22.0 ],
				"numinlets" : 2,
				"patcher" : 				{
					"fileversion" : 1,
					"appversion" : 					{
						"major" : 8,
						"minor" : 1,
						"revision" : 0,
						"architecture" : "x64",
						"modernui" : 1
					}
,
					"classnamespace" : "box",
					"rect" : [ 59.0, 106.0, 640.0, 480.0 ],
					"bglocked" : 0,
					"openinpresentation" : 0,
					"default_fontsize" : 12.0,
					"default_fontface" : 0,
					"default_fontname" : "Arial",
					"gridonopen" : 1,
					"gridsize" : [ 15.0, 15.0 ],
					"gridsnaponopen" : 1,
					"objectsnaponopen" : 1,
					"statusbarvisible" : 2,
					"toolbarvisible" : 1,
					"lefttoolbarpinned" : 0,
					"toptoolbarpinned" : 0,
					"righttoolbarpinned" : 0,
					"bottomtoolbarpinned" : 0,
					"toolbars_unpinned_last_save" : 0,
					"tallnewobj" : 0,
					"boxanimatetime" : 200,
					"enablehscroll" : 1,
					"enablevscroll" : 1,
					"devicewidth" : 0.0,
					"description" : "",
					"digest" : "",
					"tags" : "",
					"style" : "",
					"subpatcher_template" : "",
					"boxes" : [ 						{
							"box" : 							{
								"maxclass" : "newobj",
								"text" : "sel 1",
								"linecount" : 2,
								"numoutlets" : 2,
								"outlettype" : [ "bang", "" ],
								"id" : "obj-165",
								"patching_rect" : [ 60.25, 175.0, 31.0, 36.0 ],
								"numinlets" : 2
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "newobj",
								"text" : "< 100.",
								"linecount" : 2,
								"numoutlets" : 1,
								"outlettype" : [ "int" ],
								"id" : "obj-110",
								"patching_rect" : [ 60.25, 138.0, 37.0, 36.0 ],
								"numinlets" : 2
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "newobj",
								"text" : "random 100",
								"linecount" : 2,
								"numoutlets" : 1,
								"outlettype" : [ "int" ],
								"id" : "obj-109",
								"patching_rect" : [ 60.25, 100.0, 65.0, 36.0 ],
								"numinlets" : 2
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "inlet",
								"numoutlets" : 1,
								"outlettype" : [ "bang" ],
								"id" : "obj-106",
								"patching_rect" : [ 60.25, 40.0, 30.0, 30.0 ],
								"numinlets" : 0,
								"comment" : "",
								"index" : 1
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "inlet",
								"numoutlets" : 1,
								"outlettype" : [ "" ],
								"id" : "obj-108",
								"patching_rect" : [ 95.25, 40.0, 30.0, 30.0 ],
								"numinlets" : 0,
								"comment" : "",
								"index" : 2
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "outlet",
								"numoutlets" : 0,
								"id" : "obj-117",
								"patching_rect" : [ 50.0, 263.0, 30.0, 30.0 ],
								"numinlets" : 1,
								"comment" : "",
								"index" : 1
							}

						}
, 						{
							"box" : 							{
								"maxclass" : "outlet",
								"numoutlets" : 0,
								"id" : "obj-120",
								"patching_rect" : [ 85.0, 263.0, 30.0, 30.0 ],
								"numinlets" : 1,
								"comment" : "",
								"index" : 2
							}

						}
 ],
					"lines" : [ 						{
							"patchline" : 							{
								"source" : [ "obj-106", 0 ],
								"destination" : [ "obj-109", 0 ]
							}

						}
, 						{
							"patchline" : 							{
								"source" : [ "obj-108", 0 ],
								"destination" : [ "obj-110", 1 ]
							}

						}
, 						{
							"patchline" : 							{
								"source" : [ "obj-109", 0 ],
								"destination" : [ "obj-110", 0 ]
							}

						}
, 						{
							"patchline" : 							{
								"source" : [ "obj-110", 0 ],
								"destination" : [ "obj-165", 0 ]
							}

						}
, 						{
							"patchline" : 							{
								"source" : [ "obj-165", 0 ],
								"destination" : [ "obj-117", 0 ]
							}

						}
 ]
				}
,
				"saved_object_attributes" : 				{
					"description" : "",
					"digest" : "",
					"globalpatchername" : "",
					"tags" : ""
				}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.numbox",
				"varname" : "Seq prob[1]",
				"numoutlets" : 2,
				"outlettype" : [ "", "float" ],
				"id" : "obj-59",
				"patching_rect" : [ 1149.8333340883255, 194.833333134651184, 44.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 100.0,
						"parameter_initial" : [ 100.0 ],
						"parameter_shortname" : "Seq prob",
						"parameter_type" : 0,
						"parameter_unitstyle" : 5,
						"parameter_linknames" : 1,
						"parameter_longname" : "Seq prob[1]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.menu",
				"varname" : "live.menu[2]",
				"numoutlets" : 3,
				"outlettype" : [ "", "", "float" ],
				"id" : "obj-61",
				"patching_rect" : [ 1035.8333340883255, 39.333333134651184, 100.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 18,
						"parameter_initial" : [ 7.0 ],
						"parameter_shortname" : "live.menu",
						"parameter_enum" : [ "1nd", "1n", "1nt", "2nd", "2n", "2nt", "4nd", "4n", "4nt", "8nd", "8n", "8nt", "16nd", "16n", "16nt", "32nd", "32n", "32nt", "64n" ],
						"parameter_type" : 2,
						"parameter_longname" : "live.menu[2]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "translate notevalues ms",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-62",
				"patching_rect" : [ 1042.8333340883255, 76.333333134651184, 135.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "metro 500",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-63",
				"patching_rect" : [ 1028.8333340883255, 118.333333134651184, 63.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "counter 0",
				"numoutlets" : 4,
				"outlettype" : [ "int", "", "", "int" ],
				"id" : "obj-64",
				"patching_rect" : [ 1028.8333340883255, 238.333333134651184, 61.0, 22.0 ],
				"numinlets" : 5
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "button",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-68",
				"patching_rect" : [ 882.0, 132.0, 24.0, 24.0 ],
				"numinlets" : 1,
				"parameter_enable" : 0
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "p probability",
				"numoutlets" : 2,
				"outlettype" : [ "bang", "" ],
				"id" : "obj-69",
				"patching_rect" : [ 882.0, 171.0, 73.0, 22.0 ],
				"numinlets" : 2,
				"patcher" : 				{
					"fileversion" : 1,
					"appversion" : 					{
						"major" : 8,
						"minor" : 1,
						"revision" : 0,
						"architecture" : "x64",
						"modernui" : 1
					}
,
					"classnamespace" : "box",
					"rect" : [ 59.0, 106.0, 640.0, 480.0 ],
					"bglocked" : 0,
					"openinpresentation" : 0,
					"default_fontsize" : 12.0,
					"default_fontface" : 0,
					"default_fontname" : "Arial",
					"gridonopen" : 1,
					"gridsize" : [ 15.0, 15.0 ],
					"gridsnaponopen" : 1,
					"objectsnaponopen" : 1,
					"statusbarvisible" : 2,
					"toolbarvisible" : 1,
					"lefttoolbarpinned" : 0,
					"toptoolbarpinned" : 0,
					"righttoolbarpinned" : 0,
					"bottomtoolbarpinned" : 0,
					"toolbars_unpinned_last_save" : 0,
					"tallnewobj" : 0,
					"boxanimatetime" : 200,
					"enablehscroll" : 1,
					"enablevscroll" : 1,
					"devicewidth" : 0.0,
					"description" : "",
					"digest" : "",
					"tags" : "",
					"style" : "",
					"subpatcher_template" : "",
					"boxes" : [ 						{
							"box" : 							{
								"maxclass" : "newobj",
								"text" : "sel 1",
								"linecount" : 2,
								"numoutlets" : 2,
								"outlettype" : [ "bang", "" ],
								"id" : "obj-165",
								"patching_rect" : [ 60.25, 175.0, 31.0, 36.0 ],
								"numinlets" : 2
							}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.numbox",
				"varname" : "Seq prob[2]",
				"numoutlets" : 2,
				"outlettype" : [ "", "float" ],
				"id" : "obj-70",
				"patching_rect" : [ 931.0, 147.5, 44.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 100.0,
						"parameter_initial" : [ 100.0 ],
						"parameter_shortname" : "Seq prob",
						"parameter_type" : 0,
						"parameter_unitstyle" : 5,
						"parameter_linknames" : 1,
						"parameter_longname" : "Seq prob[2]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.text",
				"varname" : "live.text[4]",
				"numoutlets" : 2,
				"outlettype" : [ "", "" ],
				"id" : "obj-39",
				"patching_rect" : [ 672.333330869674683, 62.49666805744171, 44.0, 15.0 ],
				"numinlets" : 1,
				"text" : "START",
				"parameter_enable" : 1,
				"texton" : "START",
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_mmax" : 1,
						"parameter_shortname" : "live.text[3]",
						"parameter_enum" : [ "val1", "val2" ],
						"parameter_type" : 2,
						"parameter_longname" : "live.text[4]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "live.menu",
				"varname" : "live.menu[1]",
				"numoutlets" : 3,
				"outlettype" : [ "", "", "float" ],
				"id" : "obj-40",
				"patching_rect" : [ 815.0, 42.0, 100.0, 15.0 ],
				"numinlets" : 1,
				"parameter_enable" : 1,
				"saved_attribute_attributes" : 				{
					"valueof" : 					{
						"parameter_initial_enable" : 1,
						"parameter_mmax" : 18,
						"parameter_initial" : [ 7.0 ],
						"parameter_shortname" : "live.menu",
						"parameter_enum" : [ "1nd", "1n", "1nt", "2nd", "2n", "2nt", "4nd", "4n", "4nt", "8nd", "8n", "8nt", "16nd", "16n", "16nt", "32nd", "32n", "32nt", "64n" ],
						"parameter_type" : 2,
						"parameter_longname" : "live.menu[1]"
					}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "translate notevalues ms",
				"numoutlets" : 1,
				"outlettype" : [ "" ],
				"id" : "obj-41",
				"patching_rect" : [ 822.0, 79.0, 135.0, 22.0 ],
				"numinlets" : 1
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "metro 500",
				"numoutlets" : 1,
				"outlettype" : [ "bang" ],
				"id" : "obj-56",
				"patching_rect" : [ 810.0, 121.0, 63.0, 22.0 ],
				"numinlets" : 2
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "counter 0",
				"numoutlets" : 4,
				"outlettype" : [ "int", "", "", "int" ],
				"id" : "obj-44",
				"patching_rect" : [ 810.0, 191.0, 61.0, 22.0 ],
				"numinlets" : 5
			}

		}
, 		{
			"box" : 			{
				"maxclass" : "newobj",
				"text" : "noteout",
				"numoutlets" : 0,
				"id" : "obj-35",
				"patching_rect" : [ 460.700000000000045, 1059.333330512046814, 49.0, 22.0 ],
				"numinlets" : 3
			}

Hey!
Nop, still sounds two notes at the same time.
But now the calculation area looks cleaner! 
I came up with a sketchy solution using tresh, unpack and a gate controlled by a zl.len
It works, now it sounds just one step at a time, but I havent tested it that much, it feels sketchy.

If someone has a better solution to share that will be great!

there are two ways: either you avoid sending a trigger into it already, which requries that you control both clocks from a main clock. 
or you filter successive data out at the end using for example gate and timer - or alternatively tresh 0 with zl slice 1.

"matrixctrl" is sending not only the on state (x y 1), but is also turning off the previous value (x y 0). Since you are ignoring the last value in your unpack, the system understands both on and off values as being notes to be played, hence the doubling.

Here, I rotate the last value (on or off) to be the first in the list, and route every list starting with 1 (on value), ignoring the 0s.


That makes sense, but still getting two notes at the same time. Seems like its sending two activations (1) for each time the dot moves on the matrixctrl. I will try gate and timer or tresh 0 with zl slice 1  as Roman Thilenius suggests.
But its getting better, so thanks for your help!

Once again, using thresh, zl len and a gate make it work. One of the problems is that when X and Y moves at the same time, it sends a two number list. When they move one by one in separate moments, just one number is sent and there is no problem, but when X and Y moves together, they send two numbers of which only the last is the one that should pass, so its necessary to detect if its sending one number or two and that's where the zl len and the gate comes into play.


Getting two numbers at the same time,.. I want just one at a time

2000

Is anyone able to help? I'm trying to break down a couple of more complicated patches that I've seen. Is it possible to use the numbers generated by a line object to draw lines in Jitter that correspond to this information? I've had a look at the procedural drawing tutorial, but it's using line in a more complicated way. I'm just after a way of representing number values from line to be produced visually. Going from point to point. Any advice is much appreciated.

Hello,
Is anyone able to help? I'm trying to break down a couple of more complicated patches that I've seen. Is it possible to use the numbe

using-line-object-to-draw-lines

Thank you. Can this method be used to create a line point to point as if drawing a line in a function object? I was really hoping for something within the Jitter environment.

no,  but why don´t you use function->line? The LCD object can draw lines and jitter, but I don´t know much about jitter.

lots of ways to draw lines from points in Jitter. easiest is probably jit.gl.path object, but depends on your needs. 

Using line object to draw lines

Does anyone know how to load in chooser the content of a specific folder with the message "prefix"?

However, the same message sequence used with chooser works with umenu.

chooser-forHD-event.maxpat

Hi guys,

Does anyone know how to load in chooser the content of a specific folder with the message "prefix"? 

Hi guys,

Does anyone know how to load in chooser the content of a specific folder with the message "prefix"? 
However, the same message seq

chooser-load-a-specific-folder-with-the-message-prefix

I think the problem is set filekind audiofile,
which then uses database indexed items.
You have to unassign that, and use types
set to WAVE, AIFF etc for audio files


chooser - load a specific folder with the message prefix

riotchild

Has anyone had success using the Max Toolbox (to connect groups of objects at once) in Max 8?

Has anyone had success using the Max Toolbox (to connect groups of objects at once) in Max 8?
Thanks.

max-toolbox-for-version-8

yes. in the first .versions it was working completely normally, but since the last updates (beta) it stopped. don`t know exactly with which version it started.
already missing it a lot......


its working for me. I've noticed when I update Max, I have to go to Extras -> Toolbox and click Activate

I wonder if it's because I'm using Catalina.

im on mojave on my main machine but i just checked on a catalina laptop and its working there too. 

nick, - offtopic - i just unzipped the mac version of sdif-examples under win7, it has a "_Deleted Items" folder in it with some stuff. ;)

huh? I just checked the one I uploaded. Theres a few files in there but nothing that too interesting. Did you find something I didnt? the way you put it I thought maybe my tax records were in there. 


no, just externals and patches, otherwise i wouldnt have contacted you here. :P

i think it is strange that macOS does allow to include such invisible folders in zips (even if it was .maxzip in this case), and i only found it because i usually sort downloads via windows.


Hey, I've worked on updating the toolbox and fixing the "activate" bug for Max8. this version should work (for me on MacOS 10.13). Also made some various other improvements. It is not yet merged with the main branch but you can already give it a go here: https://github.com/tmhglnd/maxtoolbox 

oh nice. Thanks for taking this over Timo. I'm a fan (and supporter!) of some of your other repos.  

I can confirm that I was able to activate the toolbox and it continued to work when I restarted Max. 

Max toolbox for Version 8

James Batty

I would really appreciate any help on this problem!

I have a list of combinations (around 2000 in total) of instruments, like:

I want to order them according to these rules:

- an instrument must be in >= 2 consecutive combinations

- there must be >= 2 combinations between an instrument starting/ending

I tried using a zl object but could not work out a way to work with combinations rather than individual list entries.

Riot Combos 2-10 minus start and end (1922).txt

I have a list of combinations (around 2000 in total) of instruments, like:
Fl Cl Vn Va Db
Cl Vn Hn Vc
Bsn Hn Pno
(I attached the full list)

I want to order them according to these rules:
- an instrument must be in >= 2 consecutive combinations
- there must be >= 2 combinations between an instrument starting/ending

I would really appreciate any help on this problem!
I have a list of combinations (around 2000 in total) of instruments, like:
Fl Cl Vn Va D

ordering-permutationscombinations

Ordering Permutations/Combinations?

Matéo Esnault

I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 

I'm connected to an MY16 AUD-2 Dante external card, (16x16, DVS latency setting : 10ms, static ip)

When I use a DAW like Ableton or reaper, I don't have any latency issues (the dante latency monitor shows me an average of 1 or 2 ms), but when I launch Max and create an dac or mc.dac objet, the dante latency starts being a mess.

For exemple, after a few minutes of running my dvs : 

I tried on differents computer and i don't have this issue (I have a macbook Pro 2017 3,5 GHz Intel Core i7 dual core)

My hypothesis is that there is a problem with the coreaudio management by max. 

Hi, 
I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 
I'm connected to an MY16 AUD-2 Dante external card, (16x16, DVS latency setting : 10ms, static ip)
When I use a DAW like Ableton or reaper, I don't have any latency issues (the dante latency monitor shows me an average of 1 or 2 ms), but when I launch Max and create an dac or mc.dac objet, the dante latency starts being a mess.
For exemple, after a few minutes of running my dvs :  
Peak Value : 60ms
Late : 210

I tried on differents computer and i don't have this issue (I have a macbook Pro 2017 3,5 GHz Intel Core i7 dual core)
My hypothesis is that there is a problem with the coreaudio management by max. 

Thanks in advance,
Matéo


Hi, 
I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. 
I'm connected to an MY16 AUD-2 Dante external card, (

dante-virtual-soundcard-and-max-latency

Dante Virtual Soundcard and MAX Latency

Lorenzo Lamasse

Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:

Here is the subpatcher that does the blink:

image.png

And here is what happens from time to time when I click the tex triggering element (bangs from 0 to 1):

panelbug.gif

It seems that the panel is NOT updated until the mouse hovers it, which is an unexpected behavior...

Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:
Here is the subpatcher that does the blink:


And here is what happens from time to time when I click the tex triggering element (bangs from 0 to 1):


It seems that the panel is NOT updated until the mouse hovers it, which is an unexpected behavior...
Any similar experience or clue ?
Thanks !


Hi all,
Facing an issue with trying to set bgfillcolor of a panel to make it blink when a text zone is pressed:
Here is the subpatcher that 

weird-behavior-of-panel

Interesting. Please use "Copy Compressed" and paste relevant code in your post, that's much easier to try and help you.
I can't reproduce what you describe (I'm on Mac). I used this test patch:


i know two situations where graphics eventually might not update in time; while the mouse os down on the object which shows the graphics, or when the mouse is down and its output is moved into high priority, like in your patch.

however i have never seen that something only updates only after mouseover. :)

here is what i use.



Maybe some weird side effect, the issue has lasted for like 2 days, but seems to be gone this morning, though I have not exitted Max or Live at all. Very weird... A GPU glitch, don't know if this is some OpenGL refreshing that was stuck somewhere, but it seems fixed for now... I'll report if it happens again. 
BTW, your patch works without any issue (with no surprise here).
Thanks for taking the time anyway !


Weird behavior of panel

Dan Nigrin

For a few different reasons, I need to use a umenu in one instance for an application I'm building. In all other parts of the app, I'm using live.menu objects however, and so I would like to make the umenu look exactly like the live.menu's. I can get close with the various color options available in umenu, but it's not quite right.

This is a long shot, but has anyone created a custom jspainter file that could be used with the umenu to make it look like the live.menu?

For a few different reasons, I need to use a umenu in one instance for an application I'm building.  In all other parts of the app, I'm using live.menu objects however, and so I would like to make the umenu look exactly like the live.menu's.  I can get close with the various color options available in umenu, but it's not quite right.  

For a few different reasons, I need to use a umenu in one instance for an application I'm building.  In all other parts of the app, I'm usin

make-a-umenu-visually-look-like-a-live-menu-using-jspainter-file

Hi Dan. Does this workaround help?
https://cycling74.com/forums/sharing-method-to-populate-a-live-menu 

Thanks Pedro, but I'm already aware of the _parameter_range trick - see https://cycling74.com/forums/changing-live-menu-items-on-the-fly .  Unfortunately it still doesn't address some other challenges I've got currently with live.menu....

make a umenu visually look like a live.menu using jspainter file?

zion

I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a different audio track's input, that maybe contains standards Live instruments etc... 

I know how to path a track in the LOM system but not sure how and if possible to send audio signal via that system..

Hi,
I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a different audio track's input, that maybe contains standards Live instruments etc... 
I know how to path a track in the LOM system but not sure how and if possible to send audio signal via that system..
a small patch or reference would help.
Thanks!

Hi,
I want to Splitting audio signal in a device, and sent it by default to the [plugout~] object in my device but at the same time to a dif

splitting-audio-signal-in-a-m4l-device-to-a-different-audio-track's-input

https://cycling74.com/articles/audio-routes-using-audio-routes-tooling-for-your-mfl-devices

Splitting Audio signal in a M4L device, to a different audio track's input

Ben Bracken

. The Runner provides plug and play access to a 

 from the Max application, using using OSCQuery for communication with the running code.

This update features a new web-based interface with routing capabilities, expanded hardware support, along with many other improvements and bug fixes. Improvements include:

We've also rolled in direct support for the 

 add-on package, and have included a number of other improvements and bug fixes. Check out the release notes 

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager.

With this update, we are...

Cycling '74 Forums

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager. With this update, we are...

We are excited to announce the availability of our Eventide package for RNBO as a public beta. We’ve worked closely with Eventide to...

Great work!

Once again, using thresh, zl len and a gate make it work. One of the problems is that when X and Y moves at the same time, it sends a two...

Hello, Thank you. I'll take a look.

I think the problem is set filekind audiofile, which then uses database indexed items. You have to unassign that, and use types set to...

oh nice. Thanks for taking this over Timo. I'm a fan (and supporter!) of some of your other repos. I can confirm that I was able to...

I would really appreciate any help on this problem! I have a list of combinations (around 2000 in total) of instruments, like: Fl Cl Vn Va D

Hi, I'm using Dante Virtual Soundcard with Max, but I have some dante latency issue. I'm connected to an MY16 AUD-2 Dante external card, (

Maybe some weird side effect, the issue has lasted for like 2 days, but seems to be gone this morning, though I have not exitted Max or...

Thanks Pedro, but I'm already aware of the _parameter_range trick - see https://cycling74.com/forums/changing-live-menu-items-on-the-fly ....

https://cycling74.com/articles/audio-routes-using-audio-routes-tooling-for-your-mfl-devices