Luke Woodbury

Max 8 being 64Bit means the Lanbox DMX controller externals don't work anymore :(

I did email them, but I don't know if they are going to update them and I can't wait so I cooked up a replacement for lcudp-pack and unpack. You will need Adam Siska's UDP objects from the sadam library: 

I haven't tested it extensively, but it seems to work just fine for my purposes, if you are still rocking a Lanbox then maybe they will help you. 

lcudp-packHACK.maxpat

Max 8 being 64Bit means the Lanbox DMX controller externals don't work anymore :( 

I did email them, but I don't know if they are going to update them and I can't wait so I cooked up a replacement for lcudp-pack and unpack. You will need Adam Siska's UDP objects from the sadam library: 
http://www.sadam.hu/hu/node/1 

I haven't tested it extensively, but it seems to work just fine for my purposes, if you are still rocking a Lanbox then maybe they will help you. 


Max 8 being 64Bit means the Lanbox DMX controller externals don't work anymore :( 
I did email them, but I don't know if they are going to u

sharing-is-lanbox-in-max-8-lcudp-pack-hack

EDIT: I figured it out and it looks awesome! I can even do things I was not able to do with lcudp-pack! Thanks Luke for the generosity of sharing this!

Hello Luke and thank you for this life-saver!
I have the same problem and I have downloaded your patch: unfortunately, I do not get where I should feed the long DMX channel list I usually fed into lcudp-pack. In other words, with lcudp-pack, I simply fed a very long list of changing numbers to manage several DMX channels at once. The list was simply organized as [value for the first DMX channel] [ value for the second DMX channel] [value for the third DMX channel], and so on. Could you tell me if I can use such a strategy also with your hack and, in case I can, where exactly should I put it?

Moreover, with lcudp-pack, I used a qmetro object to pace the sendings - do I need that as well?

having problems with my lanbox I just found this hack! 
How can I connect to the Lanbox? I can see incoming messages from the lanbox within the @lcudp/unpack hack@ sub patcher, but sending values doesn't work. 
Any help appreciated (kind of urgent :))

Thing is with the Lanbox, once you set it up you can kind of ignore it so I am finding it hard to remember what I did...

The sender is using 'localhost' so I guess the Lanbox will need to be connected to your machine or you can swap localhost for the actual IP address? Sorry, not much help. 

Have you tried the Lanbox setup software to see if you can communicate with it there? 

thanks for this, it worked for me just fine.  I was lucky that the lanbox still had default ip and receive port (192.168.1.77 4777)
I tried replacing the [sadam.udpsender] with the regular [updsend] , using same host ip and port but that dosen't work.  Dose anybody know why?  I thought it would be nice if it could work with no extra externals, it would be more future proof...


Its been a while, but I seem to remember that standard [udpsend] is really all about OSC and formats it thusly.  [sadam.udpsender]  I think is raw udp 

Hi, i do not succeed in making it working with my LCX lanbox... I'm using max8 installed on a 10.13.6 high Sierra OSX. Does someone uses lcudp-packHACK ?
Thanks.

attached a patch i had which worked with the lan box, no externals.  You can see i things were done there, maybe that helps.  In my case i was lucky because the lanbox was still setup up with default ip and port.

Thank you, it seems perfect, but it didn't worked... it works with LCedit / same ip address 192.168.1.77 but not with max... strange...

i remember the Lanbox needs a password, possible to configure and avoid only with LCedit. 
Here a thing i made in 2019, based on lcudp-packHACK, worked (sorry spag proto in a poly~...)


here without the Lanbox, "sadam.udpSender: Host is down" in Max console
Philippe: you write 192.168.7.77 , not 192.168.1.77 ?
hth
michel z


Sharing is, Lanbox in Max 8 - lcudp-pack hack

fraction

Let's say i have a basic code to change max objects from active/inactive:

-var active_ui = ["myobject1", "myobject2"]

{ var active = arrayfromargs(arguments); for (var objectName in active_ui)

{ var obj = p.getnamed(active_ui[objectName]);

Now imagine, the object take their varname from the abstraction, and we have #1_myobject1, #1_myobjects2 instead. So the code doesn't know the name in the var.

i guess i have to create a new var for the #, but then i need some string operation to get the right reference?

hi,
Still exploring js for ui configuration.

Let's say i have a basic code to change max objects from active/inactive:

-var active_ui = ["myobject1", "myobject2"]

-function active ()
{  var active = arrayfromargs(arguments); for (var objectName in active_ui)
    {    var obj = p.getnamed(active_ui[objectName]);
       { obj.active(active);  
        }
    }
}

Now imagine, the object take their varname from the abstraction, and we have #1_myobject1, #1_myobjects2 instead. So the code doesn't know the name in the var.
How would  i handle the # in js? 
i guess i have to create a new var for the #, but then i need some string operation to get the right reference?

hi,
Still exploring js for ui configuration.
Let's say i have a basic code to change max objects from active/inactive:

-var active_ui = ["m

using-with-js-with-dynamic-argument-from-abstraction

If you are still working on this, I can probably help.  But I don't fully understand what you are trying to do.  So, if you want to pursue this, can you please post examples?  Maybe something like this:
Example 1:  A patcher and  a Javascript that work together, where the Javascript is the same or much the same as what you have shown already.
Example 2:  Multiple  (as you mention abstractions) patchers and a Javascript that don't yet work together but give an idea of what you want to achieve.
(A safe and clear way to provide this information would be to attach two zip files to your post, one for each of Example 1 and Example 2.) 

I think you want to see the "jsarguments" entry here: https://docs.cycling74.com/max8/vignettes/jsglobal

And use #1 in your js object ( e.g.  [js myScript.js #1]  ) inside your abstraction.

using with js with dynamic argument from abstraction #

Maax arrnould

I would like to know, if someone from you, have already created a patch to convert an audio input, into a midi signal in a real time. I've seen that it exists for max for live, but I'm not a Ableton user. 

Is there somebody who would like to tell me which object should to use for doing this ?

I would like to know, if someone from you, have already created a patch to convert an audio input, into a midi signal in a real time. I've seen that it exists for max for live, but I'm not a Ableton user. 
Is there somebody who would like to tell me which object should to use for doing this ? 

Hello dear all community, 
I would like to know, if someone from you, have already created a patch to convert an audio input, into a midi si

audio-to-midi-real-time

The amxd~ object lets you host Ableton Max for Live devices, so you don't need to be an Ableton user - I'm assuming that you searched maxforlive.com to find this, of course. You can load the device and open it to see what's inside without being a Live owner.

Hello, 
I've  found a patch who's call AUDIO TO MIDI INPUT, but my computer doesn't recognize sigmund ~as an object, even if I've already downloaded it. 
I feel a bit stuck with this. 

Thank you so much by  the way, for the answer,

For sigmund~ look at this thread:
https://cycling74.com/forums/sigmund-64-bit-version

Audio to midi - Real time 

Jason Charney

. The JSONs come in in GeoJSON format, with "type", "metadata," and "features" as keys in the top-level hierarchy that comes in. The salient info I need is in the "features" dictionary, which itself seems to be an array of dictionaries.

When I try to use [dict.unpack] at "features" I only get the list of the properties of the first item in [dict.view]./[dict.print]. How do I get ALL of the features objects in this same level of the hierarchy? The [dict] does show there are a number of dictionaries equal to the number in the array when I sent "get features" to the dict that all the data is stored in.

Do I need to like...iterate through the numbers in the array of features - e.g. "getfeatures[1], getfeatures[2]..." for every since "features" object in the full JSON object? There's gotta be a better way.

I'm wanting to get some info from the USGS Earthquake feed. The JSONs come in in GeoJSON format, with "type", "metadata," and "features" as keys in the top-level hierarchy that comes in. The salient info I need is in the "features" dictionary, which itself seems to be an array of dictionaries.  

When I try to use [dict.unpack] at "features" I only get the list of the properties of the first item in [dict.view]./[dict.print]. How do I get ALL of the features objects in this same level of the hierarchy?  The [dict] does show there are a number of dictionaries equal to the number in the array when I sent "get features" to the dict that all the data is stored in.

I'm wanting to get some info from the USGS Earthquake feed. The JSONs come in in GeoJSON format, with "type", "metadata," and "features" as 

unpacking-arrays-of-dicts-within-dicts

Hi - Did you ever get this one solved? I have the same issue - except with air quality data rather than earthquakes!

Sorry if I'm late to the party, but I've had a similar issue and solved using "unpack dict dict" to split apart each "feature". One can then work on each "feature" separately.

I'm still working on how to get this to loop nicely but I hope this helps


Hi Nathan, 
could you please share a Max patch with "unpack dict dict" ?
Many thanks,

Look at my last post in this thread: https://cycling74.com/forums/get-key-name-from-a-value-dict 

unpacking arrays of dicts within dicts

plem

The helpfile doesn't help me enough, unfortunately. But maybe someone can point me in the right direction.

I have this phys.object and I want it to move only in the y direction, and maybe a little in the z.

jit.phys.barslide seems the solution but from the help I don't get a clue to set it up to achieve what I want.

The helpfile doesn't help me enough, unfortunately. But maybe someone can point me in the right direction.

I have this phys.object and I want it to move only in the y direction, and maybe a little in the z.
jit.phys.barslide seems the solution but from the help I don't get a clue to set it up to achieve what I want.
Any hints?

The helpfile doesn't help me enough, unfortunately. But maybe someone can point me in the right direction.

I have this phys.object and I wa

jit-phys-barslide-prevent-movement-in-x-andor-z-direction

for the archives, jit.phys.6dof is the answer - https://cycling74.com/forums/2d-physics-constrain/replies/1#reply-61ae744d934a867f0896c196 

jit.phys.barslide? / prevent movement in x and/or z direction

MuShoo

Anyone have any good ideas on how to constrain a jit.phys.body to only two dimensions? For instance, totally ignore the Z axis in terms of position - I'd rather not just have to set Z pos to 0 every frame manually, but that's honestly the only way I've managed to think of.

Anyone have any good ideas on how to constrain a jit.phys.body to only two dimensions?  For instance, totally ignore the Z axis in terms of position - I'd rather not just have to set Z pos to 0 every frame manually, but that's honestly the only way I've managed to think of.


2d-physics-constrain

try remove_plane $1 parameter to jit.phys.world :)


After all those years...
But what if I only want to remove a plane from one specific jet.phys.body?

you can do this with jit.phys.6dof constraint. set the lower and upper limit_lin attributes of the free axes to -1 and 1, and then for the locked axis set both to 0. do the reverse for the angular limits.

2d Physics Constrain

ghostique

https://github.com/hsimpson/vscode-glsllint/issues/40

If anyone wanna help.
https://github.com/hsimpson/vscode-glsllint/issues/40

suport-for-max-jittershader-for-vscode-glsllint

Suport for Max jittershader for vscode-glsllint

matt s

Hello! I'm trying to recreate the patch in this video: https://youtu.be/Cc1-Rq0nSVo

Around 1:20 in the vid, he creates several parameters in the gen~ object using "param" Later (~2:00) he specifies inputs for the parameters from outside gen by simply using their names. When I try to do this it won't allow me to create objects with the parameter names (they just turn orange and "No such object" error appears). Any ideas what I'm missing here?

Nonlinear Karplu-Strong (znibbles).maxpat

Hello! I'm trying to recreate the patch in this video: https://youtu.be/Cc1-Rq0nSVo
Around 1:20 in the vid, he creates several parameters in

input-for-gen-parameters

It's not working because you've tried to add an object box (typing 'n') instead of a message box (typing 'm' and then entering your text).

In addition if you do right click or ctrl click (on Mac) on the inlet of the gen obj (patch unlocked),  you'll see the parameters you named and also access the attrui obj with named parameters. Very useful but does not respond to preset...

Input for gen parameters

klaus filip

here is a simple bpatcher file to demonstrate, that thispatcher refuses to answer on the "window getsize" message,

when sitting inside a bpatcher. (which it perfectly did in max6)

please tell me, if this is a bug or a wanted new behaviour.

hi there,
here is a simple bpatcher file to demonstrate, that thispatcher refuses to answer on the "window getsize" message,
when sitting inside a bpatcher. (which it perfectly did in max6)
please tell me, if this is a bug or a wanted new behaviour.
thanks
klaus


thispatcher-in-bpatcher-does-not-report-window-size-any-more-in-max7

with 6 lines of javascript i am saved though ;)

var w;
function get()
{
        w=this.patcher.wind;
	outlet(0,w.location[2]-w.location[0],w.location[3]-w.location[1]);
}


Klaus, thank you so much for this code! I noticed that, while it works, it doesn't output quite the same information that the original getsize message generates. I made some modifications so that you now get the exact same dimensions that you'd get from thispatcher

var w; 
function get() 
{ 
w=this.patcher.wind; 
outlet(0,w.location[0],w.location[1], w.location[2], w.location[3]); 
}

ok, upon further testing, it looks like it's reporting the window size of the parent patch, not the actual bpatcher file itself

What about this?

function bang() {
outlet(0, this.patcher.box.rect);}

thispatcher in bpatcher does not report window size any more in max7

zion

Can a M4L device be auto-saved, or in general be saved with a 

or during a running process and not only with 

 Can a M4L device be auto-saved, or in general be saved with a bang or during a running process and not only with Ctrl+S or edit -> save ? 
Thanks 

 Can a M4L device be auto-saved, or in general be saved with a bang or during a running process and not only with Ctrl+S or edit -> save ? 


auto-saved-to-save-a-devise-at-the-using-level

If you use pattrstorage to store all the parameters of the device it's possible. But maybe there is another methods..

auto-saved to save a devise at the using level

Ben Bracken

. The Runner provides plug and play access to a 

 from the Max application, using using OSCQuery for communication with the running code.

This update features a new web-based interface with routing capabilities, expanded hardware support, along with many other improvements and bug fixes. Improvements include:

We've also rolled in direct support for the 

 add-on package, and have included a number of other improvements and bug fixes. Check out the release notes 

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager.

With this update, we are...

rnbo-130-released

RNBO 1.3.0 Released

We are excited to announce the availability of our 

 as a public beta. We’ve worked closely with 

. The Eventide H9000 is a rack-sized multi-effects unit with powerful DSP processing capabilities and numerous high quality built-in effects. We’re excited to enable RNBO export for this and open the door to unique custom studio effects and instruments without the strict limitations of other hardware platforms.

RNBO support is similar to the existing Gen support, but more streamlined, and uses the built-in 

, rather than a watcher patcher, to manage the export process. Eventually, all of these changes will be rolled into the standard release versions of RNBO and this package.

Get the preview version of the RNBO package (v1.2.7-eventide.0):

Get the preview version of the "Eventide H9000" package (v1.0.4-beta.3):

We’d love to hear any experiences and feedback from RNBO users with access to an H9000. To join the discussion, use the 

We are excited to announce the availability of our Eventide package for RNBO as a public beta. We’ve worked closely with Eventide to bring...

Cycling '74 Forums

We are happy to announce the release of RNBO 1.3.0, available now for download via the Max Package Manager. With this update, we are...

We are excited to announce the availability of our Eventide package for RNBO as a public beta. We’ve worked closely with Eventide to...

i remember the Lanbox needs a password, possible to configure and avoid only with LCedit. Here a thing i made in 2019, based on...

I think you want to see the "jsarguments" entry here: https://docs.cycling74.com/max8/vignettes/jsglobal And use #1 in your js object (...

For sigmund~ look at this thread: https://cycling74.com/forums/sigmund-64-bit-version

Look at my last post in this thread: https://cycling74.com/forums/get-key-name-from-a-value-dict

Great! As ever!

you can do this with jit.phys.6dof constraint. set the lower and upper limit_lin attributes of the free axes to -1 and 1, and then for the...

If anyone wanna help. https://github.com/hsimpson/vscode-glsllint/issues/40

awesome, thank you both

Thank you 11olsen :)

If you use pattrstorage to store all the parameters of the device it's possible. But maybe there is another methods..